jaydee Posted May 20, 2008 Report Share Posted May 20, 2008 Hi Guys.I now have the pic & sid combo working with an external midi (keyboard). I also have one mem bank (512) , lcd (2*16 for now) and a dinx module (all) from smash tv. But the dinx (w encoder) does not do anything. If I pull down SO/SI to ground the menu of my LCD switches (also the sound of the sid), but still no encoder or switches are working. I am also missing the sequencer. I may have the wrong software (just uploaded main / setup 6581) or incomplete or do I have to upload the sequencer software ???Can someone help me with my dinx and with the next steps?ThanksJayDee Quote Link to comment Share on other sites More sharing options...
Twin-X Posted May 20, 2008 Report Share Posted May 20, 2008 What software did you upload? Quote Link to comment Share on other sites More sharing options...
jaydee Posted May 20, 2008 Author Report Share Posted May 20, 2008 I just uploaded midibox_sid_v1_7303c.zip , setup_6581.hex , but also tried main.hex . I have the PIC18F452...thnx Quote Link to comment Share on other sites More sharing options...
nILS Posted May 20, 2008 Report Share Posted May 20, 2008 Have you soldered the buttons and encoders to the default SR pins? Quote Link to comment Share on other sites More sharing options...
jaydee Posted May 20, 2008 Author Report Share Posted May 20, 2008 Hopefully yes,I tried this one (latest config)http://www.ucapps.de/midibox_sid_cs/mbsid_v2_din_default.pdf (but only switches on J3/4/5 and one encoder on J4.but also tries this onehttp://www.ucapps.de/midibox_sid_cs/2x16_enc.pdf Quote Link to comment Share on other sites More sharing options...
Twin-X Posted May 20, 2008 Report Share Posted May 20, 2008 do you have power on your chips on the dinx board? Quote Link to comment Share on other sites More sharing options...
stryd_one Posted May 21, 2008 Report Share Posted May 21, 2008 Tags: sid,pic,din [X]SNR........... Quote Link to comment Share on other sites More sharing options...
jaydee Posted May 22, 2008 Author Report Share Posted May 22, 2008 do you have power on your chips on the dinx board?yes. Quote Link to comment Share on other sites More sharing options...
jaydee Posted May 22, 2008 Author Report Share Posted May 22, 2008 Tags: sid,pic,din [X]SNR...........meaning? Quote Link to comment Share on other sites More sharing options...
nILS Posted May 22, 2008 Report Share Posted May 22, 2008 meaning?Meaning: The tags you chose are so ambiguous that they don't really help at all. Hence, stryd_one used the [ x ]-Button and removed them to keep the SNR (signal-to-noise-ratio) as high as possible :-) Quote Link to comment Share on other sites More sharing options...
TK. Posted May 22, 2008 Report Share Posted May 22, 2008 Seems that the DIN is not workingLink to the troubleshooting guide: http://www.midibox.org/dokuwiki/din_moduleBest Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
jaydee Posted May 27, 2008 Author Report Share Posted May 27, 2008 Can you assist what tags I should use? None?Meaning: The tags you chose are so ambiguous that they don't really help at all. Hence, stryd_one used the [ x ]-Button and removed them to keep the SNR (signal-to-noise-ratio) as high as possible :-) Quote Link to comment Share on other sites More sharing options...
jaydee Posted May 27, 2008 Author Report Share Posted May 27, 2008 Thanks Thorsten, I will check this.Seems that the DIN is not workingLink to the troubleshooting guide: http://www.midibox.org/dokuwiki/din_moduleBest Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
stryd_one Posted May 28, 2008 Report Share Posted May 28, 2008 Can you assist what tags I should use? None?It really depends. Most often, you don't need to tag... but sometimes it's a good idea, where you find a post (yours or someone else's) that has good information (solutions/documentation) that you feel could be linked to other, similar posts - and those posts should have the same tag(s) in them, too.But, if you "get it wrong", then we'll fix em up eventually anyway :) Don't worry too much about it! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.