Sasha Posted May 28, 2008 Report Share Posted May 28, 2008 Some time ago I ordered interesting kit from share brained technologies www.sharebrained.comIt is meter clock driven by TI microcontroller MSP430F2002. Very simple, coffee brake project. Even It looks very cool as is, I wanted to do extreme customization. The most critical job was disassembling meter and taking out all delicate parts so I can trim it in order to screw both meters to the panel that is going to be back illuminated for extra coolness. ;) The project is almost finished... I need back door wih 2 LEDs for illumination. The back panel on pictures is illuminated by daylight not LEDs.For more pix of building process check: http://www.flickr.com/photos/fibra/sets/72157605121536800/ Quote Link to comment Share on other sites More sharing options...
Goblinz Posted May 29, 2008 Report Share Posted May 29, 2008 Nice! I need to get a laser guy! I met someone last week who gave me details for a local company so hopefully I can become his best friend :D What material did you use for the case... polystyrene???? It looks like the stuff we used to use at school for cases (and thinner for the vacuum former), but I've not managed to come across any for sale in this country. G Quote Link to comment Share on other sites More sharing options...
Sasha Posted May 29, 2008 Author Report Share Posted May 29, 2008 Thank you.I use only casted acrylic! I don`t believe polystyrene is good enough. Quote Link to comment Share on other sites More sharing options...
stryd_one Posted May 29, 2008 Report Share Posted May 29, 2008 I need to get a laser guy!You and the rest of us! Quote Link to comment Share on other sites More sharing options...
TheAncientOne Posted May 29, 2008 Report Share Posted May 29, 2008 I have to own up to being a bit of an unusual clock fetishist. I just saw this and Dammit! they're sold out.My last unusual clock was this one, from http://dutchtronix.com/ScopeClock.htm#FirmwareV3 Quote Link to comment Share on other sites More sharing options...
Sasha Posted May 29, 2008 Author Report Share Posted May 29, 2008 I`ve been dreaming of building scope clock since I`ve seen it for the first time. Such a cool looking clock. Ofcourse it must be standalone and not just plug-in for oscilloscope. Quote Link to comment Share on other sites More sharing options...
TheAncientOne Posted May 29, 2008 Report Share Posted May 29, 2008 I've saved an old 3 inch (75mm) 'scope tube for just that reason. A lot of the hard part of a scope design is not needed, (no time-base or triggering), but interpreting the data sheet for a CRT is not easy, and I still can't work out how the focus electrodes need to work. The deflection voltage needs to swing something like 400 Volts. With a small tube, the Final Anode Voltage is not that high, (If I remember right, about 1.5 - 2 KV), so a simple inverter and multiplier would do it. Sadly, it has to be a 'scope tube; the ones from those little cheap televisions are magnetic deflection, and there would be far too many problems, for me, in making one linear and fast enough. http://www.sphere.bc.ca/test/crts.htmlThese guys have a lot, though not cheap! I got mine in some surplus scrap. You might be able to pull some of the Russian ones, which are, if I remember, pretty good. Quote Link to comment Share on other sites More sharing options...
Sasha Posted May 29, 2008 Author Report Share Posted May 29, 2008 Yeah, get one going seams not so easy. I`ve been on that website... great tube selection. Quote Link to comment Share on other sites More sharing options...
/tilted/ Posted June 12, 2008 Report Share Posted June 12, 2008 Nice!!Now you need 2 more meters, and you can do an MTC display with meters! Quote Link to comment Share on other sites More sharing options...
Sasha Posted June 12, 2008 Author Report Share Posted June 12, 2008 exactly ;D Quote Link to comment Share on other sites More sharing options...
SLP Posted June 12, 2008 Report Share Posted June 12, 2008 Awesome clock! :oI've got to say that I'm a bit of a clock fetishist, too.at the moment I'm planning a Nixie-clock.(just in case any one is looking for some sowjet IN-12B Nixies with sockets, I've got some spares I can sell) Quote Link to comment Share on other sites More sharing options...
Sasha Posted June 12, 2008 Author Report Share Posted June 12, 2008 Awesome clock! :oI've got to say that I'm a bit of a clock fetishist, too.at the moment I'm planning a Nixie-clock.(just in case any one is looking for some sowjet IN-12B Nixies with sockets, I've got some spares I can sell)You mean these These I bought from ebay for a low price but without socket, so I started to build PCB for it out of pins frim DB connectors.I still didn`t find good nixie clock design but I build started with some design I find interesting. We`ll see.If you know some good design with accurate timing or some inexpensive kit please let me know. Quote Link to comment Share on other sites More sharing options...
SLP Posted June 12, 2008 Report Share Posted June 12, 2008 exactly!I've bought them from the "nixiestore". a Lot of 20, NOS with sockets.I like the way the guys from the Sowjet Union just turned the "2" 180° to make a "5" ;Dthe only "simple" designs I've found for complete DIY (open schematic, etc) are working with a 1Hz clock source and several 4017 CMOS chips to divide the clock signal and control the MPSA42 transistors.http://www.electricstuff.co.uk/nixclock.htmland that's a german one with easy to understand schematics:http://www.mcamafia.de/nixie/ncp_dt/ncp.htm Quote Link to comment Share on other sites More sharing options...
Sasha Posted June 12, 2008 Author Report Share Posted June 12, 2008 Hehe, that`s the one I`m building. :DStrange it that nixie clocks are so popular and there are still no some open source PIC based design. The commercial kits are too expensive. One German guy is selling just preprogramed PIC for some 50 EUR >:( Quote Link to comment Share on other sites More sharing options...
SLP Posted June 12, 2008 Report Share Posted June 12, 2008 The commercial kits are too expensive. yeah.... that's the point.. ::)Unfortunately I've got *no* programming skills at all.what about a midibox based nixie-clock? ;D Quote Link to comment Share on other sites More sharing options...
stryd_one Posted June 13, 2008 Report Share Posted June 13, 2008 Well a midibox interface to an RTC chip is done, so the hard work is over... Quote Link to comment Share on other sites More sharing options...
Sasha Posted June 13, 2008 Author Report Share Posted June 13, 2008 But it isn`t published yet AFAIK. Is it?What it takes to decode segments to single number signals that are needed by nixies?I was thinking of making some steampunk clock with individual lights for each number, very similar what needed for nixies but just plain light bulbs. Quote Link to comment Share on other sites More sharing options...
SLP Posted June 13, 2008 Report Share Posted June 13, 2008 well, it would also be pretty easy to "decode" any 7 segment display using an eeprom.http://www.mcamafia.de/nixie/ncp_dt/nix_deco.htmthis way we could also use a cheap radio-controlled digital clock and then simply replace the LED-display or LCD with nixies. Quote Link to comment Share on other sites More sharing options...
stryd_one Posted June 13, 2008 Report Share Posted June 13, 2008 Yeh but if it's midibox based you just don't encode it in the first place ;) Quote Link to comment Share on other sites More sharing options...
Sasha Posted June 13, 2008 Author Report Share Posted June 13, 2008 sure, but it is easy for you to say. ;D Quote Link to comment Share on other sites More sharing options...
SLP Posted June 13, 2008 Report Share Posted June 13, 2008 Yeh but if it's midibox based you just don't encode it in the first place ;)something not midibox based would be cheaper ;D Quote Link to comment Share on other sites More sharing options...
stryd_one Posted June 13, 2008 Report Share Posted June 13, 2008 what about a midibox based nixie-clock? ;Dsomething not midibox based would be cheaper ;DMake up your mind ;) Quote Link to comment Share on other sites More sharing options...
2hb Posted January 29, 2018 Report Share Posted January 29, 2018 How would you go about setting up a nixie display for Midi timecode? I know there are drivers and boards available online for interfacing nixie tubes with arduinos. I am thinking if I used that to connect to a dout module, then maybe it would just be a matter of coding? Has anyone tried doing this? Quote Link to comment Share on other sites More sharing options...
latigid on Posted January 29, 2018 Report Share Posted January 29, 2018 What is the pinout of a Nixie tube adaptor? It would depend on the interface: SPI, I2C, parallel etc. as how you might connect everything. I think Nixies use voltage that can kill you, so it's not for the light-hearted. Quote Link to comment Share on other sites More sharing options...
2hb Posted January 29, 2018 Report Share Posted January 29, 2018 I'm not sure I know how to answer, but it seems like the common method is to connect the nixie to a sn74141 or similar, with 4 connections ultimately, to the arduino. here is a diagram for what seems like the most simple way to do it from this page: http://www.instructables.com/id/How-to-Control-a-Nixie-Tube-with-an-Arduino/ the arduino sends basically a 4 digit binary value to the ic that corresponds for each number, 0 through 9, in the nixie. So I am thinking maybe, if it is possible to connect this to a dout module, that the mtc digits could somehow be programmed to send this 4 digit code instead of the 7 segment values. possibly with senders and receivers? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.