sonicwarrior Posted June 17, 2008 Report Share Posted June 17, 2008 (edited) This is the thread to ask questions about the MIDIbox CV PCB from suital to keep the bulk order thread clean. Here is a picture of the PCB: It consists of 1 CORE & 1 AOUT & 1 DINX1 & 1 bankstick on 1 PCB. All connections for the MIDIbox CV application are directly routed and therefore there is no header for these on the PCB. (CORE J10 -> AOUT J1 / CORE J9 -> DINX1 J1 / CORE J4 -> Bankstick) Power connections are for +/- 15 V or +/- 12 V (makes no difference according to suital) in Dotcom or MOTM style. You can generate the + 5 V for the digital part from V+ or a different source (Jumpers/Headers are there for both solutions). The PCB is 130 mm x 80.3 mm big. The first question comes from madox: The MIDIBoxCV has a few versions. used in different ways. Could you tell me what are the limitations of this implementation? ARe all the core's headers available? Now you are confusing me. There are not that much options for the the MIDIbox CV. ??? The following CORE headers are on the PCB: J2 (for + 5 V) J7 J14 J15 (for the LCD) J12 & J13 marked as OUT and IN (MIDI) The following AOUT headers are on the PCB: The 2 unnamed ones with 2 x 4 pins (I think they are for the balanced out option) The following DINX1 headers are on the PCB: J3 marked as "J4" (for the buttons or buttons + encoder) Is there an alternative for the MAX6007B? Yes, in this PCB you don't have to use a MAX6007B. The alternative is: LM385-Z2,5 (Reichelt order number). See http://www.midibox.org/forum/index.php/topic,4026.msg26638.html#msg26638 (sorry, it's in german) The LM385 is the TO92 case right from the MAX6007B on the picture. Of course you should not solder both! ;) The documentation can be found here: http://www.sdiy.de/de/projects/midiboxcv.html Edited November 14, 2010 by sonicwarrior Quote Link to comment Share on other sites More sharing options...
xarolium Posted June 18, 2008 Report Share Posted June 18, 2008 Great project Sonicwarriori would like to know if you ever test this PCB and it's possible to only buy you the PCB because i already have some 525 Quote Link to comment Share on other sites More sharing options...
sonicwarrior Posted June 18, 2008 Author Report Share Posted June 18, 2008 suital buyed a prototype and tested it.Here is the answer for the other question:what about the PCB only?No, because of the packaging units I mentioned. Quote Link to comment Share on other sites More sharing options...
madox Posted June 19, 2008 Report Share Posted June 19, 2008 Now you are confusing me. There are not that much options for the the MIDIbox CV. ???OK, I have probably just misunderstood the situation with the MIDIBoxCV. I thought there had been variations on the design for driving filters, etc, or different output ranges, MUX/sample and hold? I haven't read the project documentation for at least a year, so probably I am the one who is confused.Sorry for any misunderstanding.madox Quote Link to comment Share on other sites More sharing options...
nebula Posted October 16, 2008 Report Share Posted October 16, 2008 Sonicwarrior, is there a reason you don't find the AOUT_NG option appealing? It's cheaper, and even with the slightly lower spec, MIDIbox CV made with this circuit has been found to outperform commercial MIDI>CV converters.http://www.midibox.org/dokuwiki/aout_ng Quote Link to comment Share on other sites More sharing options...
sonicwarrior Posted October 16, 2008 Author Report Share Posted October 16, 2008 1. It's SMD2. It's SMD3. I didn't design the PCB4. The groupbuy already runs (this comment comes a bit late) Quote Link to comment Share on other sites More sharing options...
nILS Posted October 16, 2008 Report Share Posted October 16, 2008 1. So what?2. So what?Get over the smd fear everyone ;-) Quote Link to comment Share on other sites More sharing options...
nebula Posted October 16, 2008 Report Share Posted October 16, 2008 1. It's SMD2. It's SMD3. I didn't design the PCB4. The groupbuy already runs (this comment comes a bit late)the DAC is in an SOIC package, which is the easiest surface mount component to install. it is so ridiculously easy to do, that if you have reasonable experience with thru-hole, you'll wonder what you were so worried about.EDIT: deleted factual error. the group buy is indeed underway, although I thought it was on hold. I apologize for the misunderstanding. Quote Link to comment Share on other sites More sharing options...
stryd_one Posted October 18, 2008 Report Share Posted October 18, 2008 Get over the smd fear everyone ;-)Easy for you and I to say.... not everyone has soldering experience like you do ;)SMD's not so bad though... nothing a little bit of practice won't help :) Quote Link to comment Share on other sites More sharing options...
sonicwarrior Posted October 18, 2008 Author Report Share Posted October 18, 2008 nothing a little bit of practice won't help :) There is the problem: I don't solder that much and don't have time and desire to solder more. Quote Link to comment Share on other sites More sharing options...
nILS Posted October 20, 2008 Report Share Posted October 20, 2008 Easy for you and I to say.... not everyone has soldering experience like you do ;)Um, you make it sound like I'm some soldering guru. Which I am not. At all. The SOIC package is simply really easy to solder. Definitely nothing to be afraid of. Quote Link to comment Share on other sites More sharing options...
cimo Posted October 20, 2008 Report Share Posted October 20, 2008 SOIC goodTPQFFTQ bad Quote Link to comment Share on other sites More sharing options...
sonicwarrior Posted March 26, 2009 Author Report Share Posted March 26, 2009 Updated the first post with the MAX6007B alternative LM385. Quote Link to comment Share on other sites More sharing options...
sonicwarrior Posted November 14, 2010 Author Report Share Posted November 14, 2010 I feel like I'm the last one soldering the PCBs I made the groupbuy for. :shifty: Am I blind or is there no IC1 aka LM336 in there? Does anyone know if I can use a BC337-16 instead of the BC337-25 listed in the manual? The core orderlist lists a BC337-16 so I'm a bit confused. Quote Link to comment Share on other sites More sharing options...
TK. Posted November 14, 2010 Report Share Posted November 14, 2010 Am I blind or is there no IC1 aka LM336 in there? You probably mean LM385-Z2,5, it's a voltage reference and looks like a transistor. Does anyone know if I can use a BC337-16 instead of the BC337-25 listed in the manual? The core orderlist lists a BC337-16 so I'm a bit confused. Both transistors will work fine. 16V is sufficient, actually even a 5V type would be ok ;) Best Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.