Phattline Posted January 18, 2009 Report Posted January 18, 2009 I will order now 100 Peaces of Ledringsdoes anybody have a library for a fitting on the market aviable Encoder with pusbutton?I have finished the Ledring Library.I have finished the Ledring shematic section.I have not finished the Encoder shematic section. - have no library, or encoder type!I have not finished the board layout! (have startet it....)Here are all the Files... ;)ledring.rarledring.rar
Phattline Posted January 18, 2009 Report Posted January 18, 2009 your .0881 dim should be .079Hm, I cant do this job... I dont know wtf they want from me in this fk datasheet ??? It seems to be all ok, but not the edge!.If somebody would change (later for milling!!!!!)- that would very nice...All files..are includet in my last post....
dstamand Posted January 18, 2009 Author Report Posted January 18, 2009 I've made the part in Solid Edge 3D and i did an IGES export and a STEP export file that can be use in your design assembly.CBG1500XXB.zipCBG1500XXB.zip
Phattline Posted January 18, 2009 Report Posted January 18, 2009 I dont know is solid edge 3d, like 3d max?,Can you export it in DXF DWG? so I can make a script SCR that I can use in Eagle, for making a library?because I dont know the idges and step format...normally I work with autocard (day by day :)) and eagle...a little bit 3dmax...but 3d max i have not @ home.
dstamand Posted January 20, 2009 Author Report Posted January 20, 2009 @Phattline, no it can be saved as dwg or dxf, this is a 3D Solid model that can be used in 3D assembly.Perhaps it could be use it in 3DMax. Never tried.I've just put together a scetch drawing that show how i use the ledring with SmashTV long shaft encoder.ledring-idea1.pdfledring-idea1.pdf
dstamand Posted January 24, 2009 Author Report Posted January 24, 2009 With the ledrings, i want to use my Soundwell encoders that i bought last year, i have 100 of them and my P-401 Knobs that i bought from Nebula but it requires an extension for the encoder shaft, the female side of the extension use a set screw to lock on the shaft. Without the shaft extension, the knobs not enough tight and became loose fast because to short shaft. Here's how i did it. See attachment.
stryd_one Posted January 24, 2009 Report Posted January 24, 2009 Hmm never seen one of those before. Where'd you get this extension thingy from?
dstamand Posted January 24, 2009 Author Report Posted January 24, 2009 Custom made, i have no choice.
Phattline Posted January 26, 2009 Report Posted January 26, 2009 ok with igs i can make a dwg file in 3dmax...with that dxf I can make a eagle device... (for shematic and pcb layout)dxf.zipdxf.zip
Phattline Posted January 27, 2009 Report Posted January 27, 2009 Hmmm I have got today this mail:> Attached is order# W910951. I just want to let you know Production make a> re-count in our inventory and find out we have only 93pcs in stock.> the lead time at this moment is 4-6 weeks. If you want me to ship 93pcs. > and cancel the 7pcs. due to the lead time, please let me know and I will > ship 93pcs only. Please advised.what should I do? wait?
Phattline Posted January 27, 2009 Report Posted January 27, 2009 i will take the 93 pcs....what ever i pay 43 dollar for shipping, fk grazy! => 4 dollar for 1 Ledring >:(
strophlex Posted January 27, 2009 Report Posted January 27, 2009 What will be the total price per led-ring? I think this sounds a bit expencive and if it is ok i can take my order of 8 ledrings back. that would mean you have one ledring spare after ordering the 93 they have in stock.
strophlex Posted January 27, 2009 Report Posted January 27, 2009 What will be the total price per led-ring? I think this sounds a bit expencive and if it is ok i can take my order of 8 ledrings back. that would mean you have one ledring spare after ordering the 93 they have in stock.it will sum up to $8 per ledring, right?
stryd_one Posted January 27, 2009 Report Posted January 27, 2009 The 'Edit' button is in the bottom right corner of your post ;)
dstamand Posted January 27, 2009 Author Report Posted January 27, 2009 i will take the 93 pcs....what ever i pay 43 dollar for shipping, fk grazy! => 4 dollar for 1 Ledring >:(That is fine, led rings not easy thing to do in DIY.
strophlex Posted January 27, 2009 Report Posted January 27, 2009 I am trying hard to increase my post count ;)I will of course buy the led rings if necessary, it is up to Phattline. It is a really good thing you made the order and I don't want to be a pain in the a** but encourage bulk orders.
Phattline Posted January 27, 2009 Report Posted January 27, 2009 a´3,46 x 93 = 321,78+ shipping 45$ ( :o ) = 366,78366,78 / 93 = a´3,943$thats the price for me.... you must add your shipping cost!how ever, i have orderd it yet!
ilmenator Posted January 27, 2009 Report Posted January 27, 2009 I don't want to spoil your party, but what about taxes and customs duties?
Phattline Posted January 28, 2009 Report Posted January 28, 2009 dont understand me wrong, if nobody want have this ledrings...this is better for me...since i need....much of these........taxes...we will see, we will see....
snykehd Posted January 29, 2009 Report Posted January 29, 2009 If anyone cancels his oder, I'd be glad totake someof those spare LED rings ;)In case there are no spares: will you or someone elsedo another bulk order of those LED rings?I might need 25-50 pcs.
Phattline Posted January 31, 2009 Report Posted January 31, 2009 a nother bulk of this!but they need 5-6 weeks to produce this ledrings...actually i orderd the last 93 in stock ;)but if you want to bulk a nother patch i am with you ;)
Phattline Posted January 31, 2009 Report Posted January 31, 2009 @dstamand, you idea with the dout and din board seperatet- i like it, the encoders are quiqk airwired or a pcb would be very small....the Ledrings pcb would be very small .....on this weekend I will spend some time in layouting again...
dstamand Posted January 31, 2009 Author Report Posted January 31, 2009 ...actually i orderd the last 93 in stock ;)How about green or yellow ledrings stock ?
Phattline Posted January 31, 2009 Report Posted January 31, 2009 ??? ask them ;)i dont know maybe yes?
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now