julienvoirin Posted January 11, 2011 Report Share Posted January 11, 2011 (edited) Hello buddiez it seems that JB Weld is no more distributed in Europe :getlost: I can't find it on eBay whereas it was widely available one or 2 years ago ... My black and especially Red tubes are far finished so i need J-B Weld, in France or Europe but small shipping cost please EDIT stupid me, google serach is better than ebay search ebay JB weld If somebody wants to deal "his non complete tubes because i've build a MB6582" for 5€ in Paris, i am in Edited January 12, 2011 by julienvoirin Quote Link to comment Share on other sites More sharing options...
TK. Posted January 12, 2011 Report Share Posted January 12, 2011 ebay.de gives me 11 hits from different distributors in germany Price starts at 8.84 EUR Best Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
julienvoirin Posted January 12, 2011 Author Report Share Posted January 12, 2011 thanks TK i found it thanks to google.fr :thumbsup: Quote Link to comment Share on other sites More sharing options...
Hawkeye Posted January 12, 2011 Report Share Posted January 12, 2011 (edited) and frontpanel express can also do blind holes with metric threads in there, which can save you some ´weld if your frontpanel is thick enough (unlikely, if it is 1.5mm for a pt-10 :-)) Edited January 12, 2011 by Hawkeye Quote Link to comment Share on other sites More sharing options...
julienvoirin Posted January 12, 2011 Author Report Share Posted January 12, 2011 (edited) and frontpanel express can also do blind holes with metric threads in there, which can save you some ´weld if your frontpanel is thick enough (unlikely, if it is 1.5mm for a pt-10 :-)) my panels are already done, and it isn't for MB6582. It is for a Oberheim Matrix 1000 controller in a 3U rack Edited January 12, 2011 by julienvoirin Quote Link to comment Share on other sites More sharing options...
phunk Posted January 12, 2011 Report Share Posted January 12, 2011 dont order blind holes with threads at FP express. I had them made on my last 4mm panel and they suck. You clearly see the marks of the process on the frontside of the panel (if it isnt colored) anyway they arent as stable as they should. (lost two already) Quote Link to comment Share on other sites More sharing options...
julienvoirin Posted January 12, 2011 Author Report Share Posted January 12, 2011 blind holes with threads at FP expressthe best is julianf method : only blind holes. then JB in the holes Quote Link to comment Share on other sites More sharing options...
reboot Posted January 12, 2011 Report Share Posted January 12, 2011 phunk , if you think fpd did bad work , they have to remake for free ! i'm agree for the blind holes , forget if you use 3mm . Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.