Antix Posted January 19, 2011 Report Share Posted January 19, 2011 Hi , just completed my midibox SEQ_V3. I know that V4 is more actual but I strongly wanted build it and I am sure it will give me hours of fun. P.S. If I am wrong posting here feel free to move the post Quote Link to comment Share on other sites More sharing options...
Hawkeye Posted January 20, 2011 Report Share Posted January 20, 2011 very well done and clean - i have most respect for veroboard cs builders (struggling for myself :-)) Quote Link to comment Share on other sites More sharing options...
phunk Posted January 20, 2011 Report Share Posted January 20, 2011 !beauty! :) goodjob, well done... Quote Link to comment Share on other sites More sharing options...
rosch Posted January 20, 2011 Report Share Posted January 20, 2011 beautiful. out of time? it won't be the last V3 i'll be glad if mine's going to be half that beautiful. are the buttons the e-switch type with the round caps that are a bit lower level than the rectangular ones? Quote Link to comment Share on other sites More sharing options...
Antix Posted January 25, 2011 Author Report Share Posted January 25, 2011 Thanks Rosh and Phunk, Rosh, The switch are E-switches with a round cap I bought on RS( code 378-6511 but you can find on other sites too ) The round cap you can choice from different color ( the page on RS have the list ) and can have rectangular shape too. I used these switches because I had a lot and was a pity waste them Regards Antix Quote Link to comment Share on other sites More sharing options...
Antix Posted February 10, 2011 Author Report Share Posted February 10, 2011 very well done and clean - i have most respect for veroboard cs builders (struggling for myself :-)) Thank You Hawkeye, I think that veroboard is very fine for a good positioning for switches and encoders. Regards Antix Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.