julienvoirin Posted February 8, 2011 Report Share Posted February 8, 2011 (edited) Dear Boxers I am heavily looking for a very specific soft touch knob part : it must fit D Shaft (North oriented) potentiometers It is manufactured by Re'an under reference P300. It's the blue one on the pic attached below. Your help in finding a supplier is very welcome ; I need 23 pieces minimum (some extra are always good), ideally 100 pieces. Best regards Julien Edited February 8, 2011 by julienvoirin Quote Link to comment Share on other sites More sharing options...
rosch Posted February 9, 2011 Report Share Posted February 9, 2011 mouser have some re'an knobs but not the one you're looking for. they have some in grey. but they have the datasheet/catalog page: http://mouser.com/catalog/specsheets/REAN_Page3.pdf result: the item is P300-S-096-D6-N search leads to sulzer mixpac (hasn't there been a big bulk order for some re'an knobs with them a few years ago here on midibox?) http://www.reanknobs.com/index.php?id=cetest_firstpage you also find them in their product search. rean distributor for france is neutrik. neutrik seem to carry just plugs, not the knobs. i don't understand that. the picture you have posted is from an ebay seller i have contacted for purchase of 40pcs only the blue knobs in the picture, but serrated shaft. he said he could order some for me if i need more. i also believe they're not soft touch. maybe he can get you some D shaft types also? he needs a few days to answer sometimes, though! good luck, and please keep us posted if you find a way to order them. Quote Link to comment Share on other sites More sharing options...
julienvoirin Posted February 9, 2011 Author Report Share Posted February 9, 2011 thanks for your help i've asked to Neutrik France some help (a dealer in fact) i can't find back the ebay seller ; do you remember his nickname ? And yes there has been a group buy some years ago, but for encoder knobs. Now i need Potentiometer knob :P Quote Link to comment Share on other sites More sharing options...
rosch Posted February 9, 2011 Report Share Posted February 9, 2011 (edited) that's the link to the auction on ebay: http://cgi.ebay.de/5...309588800624234 i know i've read a bulk order thread where they were talking about ordering the Re'ans from Sulzer. i don't know if it was the order that had been run by nebula at that time. but i can look for it later tonight. i think when they could order directly with Sulzer, that should be possible again, probably depending on quantity. when the pointer knob and the encoder knob are both produced by them there shouldn't be much difference. i'll have a look tonight if i can find the thread again, it had pics of the sulzer package and everything... but at least the factory should be able to name a distributor. Edited February 9, 2011 by rosch Quote Link to comment Share on other sites More sharing options...
nebula Posted February 9, 2011 Report Share Posted February 9, 2011 (edited) that's the link to the auction on ebay: http://cgi.ebay.de/5...309588800624234 i know i've read a bulk order thread where they were talking about ordering the Re'ans from Sulzer. i don't know if it was the order that had been run by nebula at that time. but i can look for it later tonight. i think when they could order directly with Sulzer, that should be possible again, probably depending on quantity. when the pointer knob and the encoder knob are both produced by them there shouldn't be much difference. i'll have a look tonight if i can find the thread again, it had pics of the sulzer package and everything... but at least the factory should be able to name a distributor. Yeah, I took those pictures. The Canadian distributor can get anything from Re'an (subject to factory minimum orders) for shipping to Canadian addresses. So I bought a bunch of P401's for a big bulk order, and I later helped Wilba get a few thousand P401's for sequencers and Sammiches. The P401's had a 1000 piece minimum, if I recall correctly. Given a complete part number I can get a quote for you, including the minimum quantity, which is most definitely going to be more than you need. Something to consider: the "F" (flexifit) series is really awesome. The insert allows you to orient the knob in any direction relative to a d-shaft, and will also fit on splined shafts. REALLY nice if you are forced to use mismatched pots and/or encoders in a DIY build. Just sayin'. Edited February 9, 2011 by nebula Quote Link to comment Share on other sites More sharing options...
julienvoirin Posted February 9, 2011 Author Report Share Posted February 9, 2011 (edited) thnaks guys for your help :thumbsup: reference of the Re'an : P300-S-096-D6-N a quote is always good to know i've found an ebay auction where the guy says it should work for D shaft, obvious designed for rounded :geek: i will try as it costs only 11 euros I haven't found flexifit ; a picture ? Edited February 9, 2011 by julienvoirin Quote Link to comment Share on other sites More sharing options...
nebula Posted February 9, 2011 Report Share Posted February 9, 2011 (edited) http://www.reanknobs.com/index.php?id=25 I have a sample pack that I got a few years ago with one insert and the 3 sizes of knob cap. They have the same look and feel as the P300 line, but they have that universal fit insert. Brilliant. Anyway I asked for the price, minimum quantity, and lead time on the part number you provided. I'll let you know, but I expect the price to be outrageous! Edited February 9, 2011 by nebula Quote Link to comment Share on other sites More sharing options...
Wilba Posted February 9, 2011 Report Share Posted February 9, 2011 I last bought 3000pcs Rean P401 knobs direct from Sulzer (2000pcs went to SmashTV for the MB-SEQ kits). The MOQ is 1000pcs but I was able to get 100pcs of another type in the same order. So if you're stuck getting exactly what you need, I could run a mini bulk order, get another 1000pcs of P401 and an assortment of other types (min/mult 100pcs). As a rough estimate of price, here's what I got last time: 100 pcs P675-S-09-D6-S price CHF 26.70 per 100 pcs P675 is a nice knob too. Quote Link to comment Share on other sites More sharing options...
nebula Posted February 9, 2011 Report Share Posted February 9, 2011 Oh, I will correct myself after looking more closely at the pic - the flexi-fit knobs are not like the P300. They're like the P311. My bad ... they're still awesome though... Quote Link to comment Share on other sites More sharing options...
julienvoirin Posted February 10, 2011 Author Report Share Posted February 10, 2011 Wilba : DEAL ! :thumbsup: reference is P300-S-096-D6-N thanks a lot PS : some extra samples of P300-S-096-D6-S and P300-S-068-D6-N would be cool it is the colour of Oberheim Matrix6, as i am enhancing the controller developed by JackChaos Quote Link to comment Share on other sites More sharing options...
Wilba Posted February 10, 2011 Report Share Posted February 10, 2011 I wouldn't request anything less than 100pcs from Sulzer... they're being quite nice dealing with people directly (where there isn't some stupid distributor like Neutrik interfering with sales). If you think other people might want some, I can get 100pcs of each and sell what you don't want. Can you post pictures of the other two knobs? Quote Link to comment Share on other sites More sharing options...
julienvoirin Posted February 10, 2011 Author Report Share Posted February 10, 2011 I wouldn't request anything less than 100pcs from Sulzer I well understand. So just consider I need 100 pieces of P300-S-096-D6-N It is very kind of you to help me to get those desired knobs. Tell me when you need me to pay them Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.