jensah Posted March 7, 2011 Report Share Posted March 7, 2011 Hello Trying to figure out how to make a simple adapter for the 2 LCD:s that's needed for the LC, since the pinout is completely different, did anyone make a adapter card for it or what? I'm thinking of making a perfboard with a ribbon cable in and do as in the tutorial document and 2 ribbon cables out with the correct pinout. Does anyone have a simpler solution? Quote Link to comment Share on other sites More sharing options...
nebula Posted March 7, 2011 Report Share Posted March 7, 2011 Rectangular housings and crimp pins, similar to this: http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=WM2525-ND You crimp the pins to the end of individual wires, then push the pins into the housing. The result is a connector which will mate with a multi-pin header. You could create adapter cables for each type of LCD. You would need to solder a header (optionally right-angle) to the LCD. Quote Link to comment Share on other sites More sharing options...
julienvoirin Posted March 8, 2011 Report Share Posted March 8, 2011 (edited) the LCDs share the same pins, except for 1 wire, being the adress so the best is to do what's done for harddrives in computer : ribbon cable. just isolate the adress wire and it is OK connector is the following http://radiospares-fr.rs-online.com/web/1927350.htmlHE10 Rq : if pinout of LCD and Core differ, just rearrrange order on Core's connector , it is easier than rearranging on each LCD !! (i did this on my seq v2) Edited March 8, 2011 by julienvoirin Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.