Altitude Posted February 1, 2012 Author Posted February 1, 2012 you will need to chop the pot shafts on the x0x regardless..
kroutshev Posted February 1, 2012 Posted February 1, 2012 (edited) Ok, i have to cut the pots like when you used knobs provided in ladyada kit, few years ago ;-) But the diameter is ok. In that case i'm interested ! Edited February 1, 2012 by kroutshev
Altitude Posted February 2, 2012 Author Posted February 2, 2012 Alright, Just sent the RFQ. I'll just post their reply in the thread instead of PMing everyone..
kroutshev Posted February 2, 2012 Posted February 2, 2012 Ok, i'll check dimensions tonight and i will post asap ! Thanks.
Altitude Posted February 2, 2012 Author Posted February 2, 2012 (edited) Ok, Here is the scoop: "Selco only has stock on one part no. in the 3/04 series. It is 3/04DRP110-006, gray body, black pointer, line at 90 degrees from flat. We have an obsolete trio knob that has three colors- gray/black/aqua or gray/black/yellow. DRN110-006 is in stock. DR111 gray and black are not in stock. C111 caps in all colors are in stock." They have the DR110 006 and all color caps 0,58$ for the knob 0,33$ for the cap And they have these things for 0.50$ ea Edited February 2, 2012 by Altitude
gtxdude Posted February 3, 2012 Posted February 3, 2012 Is that 90 degrees clock-wise or counter-clockwise?
jojjelito Posted February 3, 2012 Posted February 3, 2012 Oooh, finally a chance to acquire some cool knobs in 3-shot. Are those hard finish only? Never mind. They look cool! Those 3-shot are actually 4/04/DR 110 006 for the d-shaft and 4/04/TP110 006 for the spline shaft. Gotta give this a short ponder before PM:ing later tonite... All of a sudden I wanted in. Dangnabbit! :frantics:
Altitude Posted February 4, 2012 Author Posted February 4, 2012 (edited) Oooh, finally a chance to acquire some cool knobs in 3-shot. Are those hard finish only? Never mind. They look cool! Those 3-shot are actually 4/04/DR 110 006 for the d-shaft and 4/04/TP110 006 for the spline shaft. Gotta give this a short ponder before PM:ing later tonite... All of a sudden I wanted in. Dangnabbit! :frantics: I'm assuming they are D shaft. The colors she says they have is gray/black/aqua and gray/black/yellow the 3/04 parts they have limited stock of are $0.75 ea BOTH the DR110 and DRN110 parts are 0.58 ea plus 0.33 for the cap Edited February 4, 2012 by Altitude
kroutshev Posted February 4, 2012 Posted February 4, 2012 I'll finalize my order that week-end. Have a nice time. K
jojjelito Posted February 4, 2012 Posted February 4, 2012 (edited) D-shaft only... No matter, just on a whim I'll take 50 4/04/DR 110 006 of each color or until the stock is gone. /J Edited February 4, 2012 by jojjelito
Altitude Posted February 6, 2012 Author Posted February 6, 2012 Ok ppl I'd like to get these ordered this week, I'll be sending individual PMs with your totals today.
kroutshev Posted February 6, 2012 Posted February 6, 2012 (edited) Ok Altitude, i'm not sure about two colour soft touch collets, they are used in x0xi0 kit and i have asked Brian to be sure about reference. I suppose that's 3/02/S151 006 Pointer close to shaft. About these knobs do you if i need to order caps or it's already include ? i need those which caps are removable to mount them in the "Bank and Mode selection" x0xb0x potentiometers. I don't know if i must order about shaft size 6 mm or 1/4 in ? [Edit] Ok confirmation from Brian, 3/02/S151 250 quantity = 20 About caps color and quantity reference C151 red 4 Orange 4 Green 4 Blue 4 Yellow 4 The others one i need : 3/04/DRP110 006 and pointer close to flat, Black Body Quantity and colors for Pointer : Red 16 Orange 16 Green 16 Blue 16 Yellow 16 If you have advise for x0xb0x use i'm very interested in case i have made a mistake. Thanks a lot. K. Edited February 6, 2012 by kroutshev
Altitude Posted February 7, 2012 Author Posted February 7, 2012 kroutshev, Please read my post about what they have stocked, none of the items you indicated are in stock and require a 500 pcs minimum order
lameth Posted February 7, 2012 Posted February 7, 2012 (edited) And they have these things for 0.50$ ea YAY! I looked into the pdf catalogue and did not see these because they aren't in there. They look even better than the 3/04 :) Only thing is that i can't find these knobs with Grey Base/Black Middle and Red pointer????!!!!! So my actual wishlist is: 50 RED (if they are available) 50 4/04/DR110 006/26 DK GREY091/BLACK005/BRIGHT GREEN127 50 4/04/DR110 006/26 DK GREY091/BLACK005/BRIGHT AQUA128 50 4/04/DR110 006/26 DK GREY091/BLACK005/MAGENTA129 50 4/04/DR110 006/26 DK GREY091/BLACK005/ORANGE023 50 4/04/DR110 006/26 DK GREY091/BLACK005/YELLOW010 Total: 300 50 DRN110 006/26 BLK 50 C110 please let me know if it's possible :) Edited February 7, 2012 by lameth
Altitude Posted February 9, 2012 Author Posted February 9, 2012 DRN110 are available, all the other stuff is special order other than what I mentioned above
DSL-man Posted February 9, 2012 Posted February 9, 2012 (edited) 100 x DRD151 006 partnumber is: DRD157 006/26 BLK please send a me the price , before you order Edited February 9, 2012 by DSL-man
kroutshev Posted February 9, 2012 Posted February 9, 2012 Hi Altitude, Ok in that case i'd like to order knobs which are for 0.50 ea, fussy knobs with Grey Base/Black Middle and Red pointer I need 80 of them. And about "3/02/S151 250" knobs, i have read that i can order 10 minimum. I need 20 of them with C151 caps in red. Please could you tell me if i'm right ? Thanks a lot. K.
Altitude Posted February 9, 2012 Author Posted February 9, 2012 DSL: I'll email them and see if they have those. I'll just ask what they have in D shaft so I dont have to keep emailing them Kroutshev: Not sure where you read that, I am dealing with Sifam's distributor in the US (Selco Products). Anything that they do not have in inventory (which is pretty limited by the looks of it) is a special order item with a 500 or 1000 piece minimum order and 10 week lead time
kroutshev Posted February 9, 2012 Posted February 9, 2012 This is where i have read that => http://www.sifam.com/knobDetails.asp?kType=Knobs_Collet&Type=3_02_S151 Base diameter: 15.5 (mm) Height (inc cap): 14.3 (mm) Shaft Depth: 7 (mm) 2 Colour: Y Pack size: 10 pcs And about fussy one 0.5$ ea, are they available ? and i need pointer close to shaft, is it ok ? Thanks. Bruno
lameth Posted February 9, 2012 Posted February 9, 2012 DRN110 are available, all the other stuff is special order other than what I mentioned above So from all your postings i get that the only option is the DRN110 with color caps because all the 3/04 and 4/04 are only on order with minimum quantity of 500? That's bad :( (except we get this much orders!) I will wait for your post what they have available in D-Shaft and on stock before i bug you with questions about the other possible Knobs ;)
Altitude Posted February 9, 2012 Author Posted February 9, 2012 (edited) This is where i have read that => http://www.sifam.com/knobDetails.asp?kType=Knobs_Collet&Type=3_02_S151 Base diameter: 15.5 (mm) Height (inc cap): 14.3 (mm) Shaft Depth: 7 (mm) 2 Colour: Y Pack size: 10 pcs And about fussy one 0.5$ ea, are they available ? and i need pointer close to shaft, is it ok ? Thanks. Bruno I am not in Europe so I cannot deal directly with Sifam, just their US distributor so anything you see on the Sifam site does not really apply (other than what style knobs the have). http://catalog.selcoproducts.com/category/conventional-push-on-knobs I put a request in for a list of whats in stock so we dont have to do this "do they have this or that?" thing anymore Edited February 9, 2012 by Altitude
kroutshev Posted February 9, 2012 Posted February 9, 2012 I put a request in for a list of whats in stock so we dont have to do this "do they have this or that?" thing anymore Yes i think that's the best thing to do !
nebula Posted February 12, 2012 Posted February 12, 2012 Thanks for your patience Altitude. If I'm not too late ... 50 x DR110 006 Caps (colour / pointer): 15 red / white 35 white / black 10 black / white 10 black / no pointer ... and I would also take 25 of those black/grey/red oddballs if there are any left.
Altitude Posted February 15, 2012 Author Posted February 15, 2012 last call. if you have not replied to my PMs, i am assuming you are not participating
kroutshev Posted February 20, 2012 Posted February 20, 2012 Hi, is it normal that i have not received pm ? K.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now