Cutter Posted December 14, 2013 Report Share Posted December 14, 2013 Heyo! After lots of thinking, I've decided to build a SEQ to become the navigation system for my spaceship. I've become hopelessly addicted to modular, and am curious if someone who use's their SEQ in a similar capacity could comment. Question one, whats the max output of analog info? 8 cv, trigger, and gate? Is more possible? Question two, can the SEQ interpret incoming cv? For instance, can I clock the SEQ from a simple trig out of my modular? Thanks much for the help! Quote Link to comment Share on other sites More sharing options...
latigid on Posted December 14, 2013 Report Share Posted December 14, 2013 There was the option of more gates (at least in V3) but I think CV is limited to 8 outs. I was wondering whether you could clock a second AOUT module for another 8 channels, it's possible in theory but I'm not sure about the programming side. You could always build a second one! The analogue inputs are used as gate outputs in the current setup. There is a tap tempo function however... Quote Link to comment Share on other sites More sharing options...
TK. Posted December 15, 2013 Report Share Posted December 15, 2013 Yes, CV is limited to 8 outputs. CV in is not supported, but a clock input might be available sooner or later. See also this topic: Best Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.