Jump to content

Adafruit UNTZtrument for a BLM?


Altitude
 Share

Recommended Posts

Heh, saw this on Muff's and was thinking the same. But the Launchpad is about the same price (8x8) and has extra buttons and tri-state LEDs. Still need to add an Arduino controller... You can buy the 4x4 Trellis PCBs for $8 each in quantity, but still only single LEDs. The silicone pads go to $4 a piece in quantity.

https://www.adafruit.com/products/1616

https://www.adafruit.com/products/1611

 

Still, it's half the price of the Sparkfun one.

https://www.sparkfun.com/products/7835

 

Sparkfun's PCB costs the same and is RGB LED compatible, but is unpopulated component-wise. https://www.sparkfun.com/products/8033

 

If the silicone pads could be had cheaply, the next thing would be to design a full 16x16 + X board or smaller ones that connect together.

Edited by latigid on
Link to comment
Share on other sites

what i found interesting about the trellis is the fact that it's all connected to i2c right out of the gate and although that limits you to 128 it still simplifies thing considerably on the back end.  With the sparkfun kit, you still have to sort out the shift registers etc but with this, it should be good to go

Link to comment
Share on other sites

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...