Phatline Posted January 6, 2016 Report Posted January 6, 2016 (edited) V01.0 is up and Running >>> 160117_TM4BLM_V01.0.zip old versions: BLM-Scalar-Communication: BLM-UI @ skelleton level.... no Midiprocessing @ all but some basic Matrix-Userinterface Code (for programmers only...stripped down a bit...) >>> 160110_blm_scalar_communication.zip first a view vocables: TM short for TriggerMatrix? >http://midibox.org/forums/topic/18839-trigger-matrix-note-processing/ BLM16x16x short for ButtonLedMatrix? > http://midibox.org/forums/topic/19736-blm-16x16x-build-guide Usage? > http://midibox.org/forums/topic/19207-tekkstar-midification-of-a-tama-techstar-306/ The Trigger Matrix is the Midi-Center in my Live-Music-Equipment, it interconnect follwing Device-groups: I will remote my Triggermatrix-Project via the BLM16x16x, they are comunicating together via Midi: Programming-Equipment: BLM Layout 4 the Perform-Mode, the 2nd Mode is the EDIT-Mode, where i can change the Trigger-Routing (not displayed here) Melody Retrigger, take the incoming Melody Notes from the Keyboard and trigger it with the Incoming DrumTriggers Drum-Trigs are simple Trigger-Routes The 4 Pots on the BLM are not used (since i removed them) 2x 2x40LCD + 17 Encoders + 2 Buttons are the UI 4 the TM, the rest is controlled via BLM thx to TK and his BLM-Driver... it works simple and fast as hell now... also code is reduced much....factor 50 or more... work in process Edited January 17, 2016 by Phatline Quote
Phatline Posted January 15, 2016 Author Report Posted January 15, 2016 (edited) UI-Updates on the TriggerMatrix-Side: from a bulk-order i have more then enough 2x40? LCDs....good point to make something with it use this crimp-able Connectors: 1st Display (up), Deep edit things - like give the track a name, or change the ProgramChange-Bank, or load tracks, or LiveSets (in Future) 2nd Display (down), Fast Access -Performance, like Random-Kill, Decay-Time, Velocity Offset - there are 2x4 Encoder because, i split the whole output-Matrix in 2 Parts: Line0: Melody Retrigger-Parts (Bass, Lead, Space Synths, Samplers) Line1: Mono Retrigger-Parts (for Drums, Filters usw) i want to perform them separately, with much space for my fingers...a 2x4 LED-Bar-Encoder Board would be nice instead! Edited January 17, 2016 by Phatline Quote
Phatline Posted January 17, 2016 Author Report Posted January 17, 2016 (edited) Edited January 17, 2016 by Phatline 1 Quote
Phatline Posted March 25, 2016 Author Report Posted March 25, 2016 (edited) since i had a MB-SEQ-CS-PCB many years now - unused, without any case or frontpanel.... i decidet to hold it and use it i programm now a TriggerMatrix version for a more generic UI... so other people can "reUse" it, i skip my prototype UI. BLM16x16+x ( @latigid on ) MB-SEQ-CS ( @Wilba ) MB-LRE8x2CS ( @Fairlightiii ) To adapt my code i had to find out the pin-out of the new UI... here is the result: TriggerMatrix @ Generic MB-SEQ CS SEQ MENU – ENCODERS 62 54 ENC 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 59 50 SR 1 1 1 1 3 3 3 3 4 4 4 4 5 5 5 5 SWING PIN 6 4 2 0 6 4 2 0 6 4 2 0 6 4 2 0 63 55 58 49 ENC 16 JOG ROUTE FullVel SR 6 46 38 PIN 2 57 34 CC SetVel BLM+x 47 39 32 33 40 41 48 49 56 57 24 25 16 17 8 9 0 1 56 33 39 38 37 36 47 46 45 44 55 54 53 52 63 62 61 60 31 30 29 28 23 22 21 20 15 14 13 12 7 6 5 4 Intro Vel-Inv QntRec Swing Copy Paste Clear <Move Move> STORE LOAD Qnt16 Qnt32 Qnt64 Kill Hi Set Hi 35 42 43 50 51 58 59 26 27 18 19 10 11 2 14 30 35 43 42 51 PAGE 10 26 Copy Paste Clear BEAT STOP PLAY REC < > < > Kill Mid Set Mid 37 44 45 52 53 60 61 1 28 29 20 21 12 13 4 15 31 0? 41 40 48 FOCUS 18 19 11 3 2 9 25 Kill Lo Set Lo MB-LRE8x2 CS 2.5 in seriell to MB-SEQ CS Wilba 6 22 ENC Kill_M Dcy_M Vel_M Delay Swn16 Swn32 BTN 8 24 SR 7 7 8 8 9 9 10 10 LED PIN 0 4 0 4 0 4 0 4 ENC Kill_D Dcy_D Vel_D Kill_T FullVel Vel_Lo Vel_Mi Vel_Hi SR 7 7 8 8 9 9 10 10 PIN 2 6 2 6 2 6 2 6 programming setup: Edited March 25, 2016 by Phatline Quote
Phatline Posted March 29, 2016 Author Report Posted March 29, 2016 (edited) a jam session with the old UI: Triggermatrix as DrumSequencer, Trigger-Router, Melody-Retrigger > Soundengine: Nord3(efx), NordDrum2, KorgER2 2x Boss RC300 as Loopstation for Melody Loops (Subouts are routed to my filterdistortionADR-Drumtriggered-device...) LiveGituar on a Gutiarsynth RC20 (that makes them etnical sounds, no not the drums they are typical NordDrum2 yesss) Edited March 29, 2016 by Phatline Quote
latigid on Posted March 29, 2016 Report Posted March 29, 2016 Looks like a really nice setup! Also good work on the BLM reimagination. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.