Sequencer only boots when connected to computer, not from powered USB hub

[u-link]

I recently upgraded to a STM32F4 Core. Everything works fine, except that I cannot power the sequencer from a USB hub (via either USB connection). The backlights of the screens turn on, but it doesn't boot. Anybody knows what I am doing wrong? Thanks a lot for input.

 

That came as a surprise when I used the sequencer (for the first time ever) for a live PA recently. I had to ask a friend to go fetch a laptop, otherwise it wouldn't have worked.

[latigid on]

Have you upgraded the ST LINK side to the latest version? 

[FantomXR]

latigid on is right: you need to update the STM-firmware to the latest version. Thorsten mention it here:

http://ucapps.de/mbhp_core_stm32f4.html

"Required Firmware Update"

[u-link]

Ah, thanks a lot for the hint! Will try it later today.

[u-link]

That did the trick, now it boots from either USB port connected to a hub. Thanks again for the pointer sisters.

[ilmenator]

On 27.3.2017 at 11:28 AM, u-link said:

Thanks again for the pointer sisters.

Not sure everyone can remember them (and understand that joke ), here is a pointer...