u-link Posted March 22, 2017 Report Posted March 22, 2017 I recently upgraded to a STM32F4 Core. Everything works fine, except that I cannot power the sequencer from a USB hub (via either USB connection). The backlights of the screens turn on, but it doesn't boot. Anybody knows what I am doing wrong? Thanks a lot for input. That came as a surprise when I used the sequencer (for the first time ever) for a live PA recently. I had to ask a friend to go fetch a laptop, otherwise it wouldn't have worked. Quote
latigid on Posted March 22, 2017 Report Posted March 22, 2017 Have you upgraded the ST LINK side to the latest version? Quote
FantomXR Posted March 22, 2017 Report Posted March 22, 2017 latigid on is right: you need to update the STM-firmware to the latest version. Thorsten mention it here: http://ucapps.de/mbhp_core_stm32f4.html "Required Firmware Update" Quote
u-link Posted March 23, 2017 Author Report Posted March 23, 2017 Ah, thanks a lot for the hint! Will try it later today. Quote
u-link Posted March 27, 2017 Author Report Posted March 27, 2017 That did the trick, now it boots from either USB port connected to a hub. Thanks again for the pointer sisters. Quote
ilmenator Posted March 29, 2017 Report Posted March 29, 2017 On 27.3.2017 at 11:28 AM, u-link said: Thanks again for the pointer sisters. Not sure everyone can remember them (and understand that joke ), here is a pointer... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.