Jump to content

CV and Gate/Trigger/ Setup - AOUT port no dual gates out


NMNN
 Share

Recommended Posts

Lately I've been trying to use the extra functions of the CV-Gate out, specifically the possibility to send velocity with key values.



From the manual:

Quote

Note 9 Key Value -> CV Out #1, Velocity -> CV Out #2, Gate #1 and #2 triggered

Note 10 Key Value -> CV Out #3, Velocity -> CV Out #4, Gate #3 and #4 triggered

etc, etc, etc

 


When I use AOUT - channel 9 I get key and velocity from the first two CV's out, as expected. But only gate #1 is triggering.

When I switch to AOUT - channel 10, I get key and velocity from the second pair of CV's out: 3 and 4. And gate #2 is firing.

What I expect is when I use AOUT - channel 9, is to get CV's from 1 and 2, and gates on #1 and #2.

This is consistent through the whole range of outputs. All the other functions work exactly as expected, the drum gates and the clocks nothing wrong.


I found this advise:

And I've scanned through the entire config, but pretty much everything is standard. I use the Wilba Front panel with the AOUT-NG with the DOUT. Here is my HW-V4: https://pastebin.com/M9aXWjEx

Am I making a mistake assiging SR's? Or is it something else I'm missing?



 



Thanks!

 

 

Edited by NMNN
markup
Link to comment
Share on other sites

  • 4 months later...

Helo! Same problem, Wilba front panel two, last update but that's work well like that :

Note 9 Key Value -> CV Out #1, Velocity -> CV Out #2, Gate #1 triggered    

Note 10 Key Value -> CV Out #3, Velocity -> CV Out #4, Gate #2 triggered

Note 11 Key Value -> CV Out #5, Velocity -> CV Out #6, Gate #3 triggered  

Note 12 Key Value -> CV Out #7, Velocity -> CV Out #8, Gate #4 triggered  

Link to comment
Share on other sites

This was a translation error in the code, it's fixed now (and enhanced by a new feature! :)

http://www.ucapps.de/mios32/midibox_seq_v4_095_pre12.zip

   o AOUT: Channel 9..12/13..15 now set the gate pins #1/3/5/7 as documented (previously it was #1/2/3/4 due to a code translation error)
     New: gate pins #2/4/6/8 are now set whenever the velocity is >100.
     This way the pins can be used as an accent trigger

Best Regards, Thorsten.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...