etko Posted February 4, 2003 Report Posted February 4, 2003 This is my first massage on this forum and i'm not even sure is this right place for that :) But:Does midi box work propperly whit propellerheads Reason 2.0 ?? :-[ Quote
serge Posted February 5, 2003 Report Posted February 5, 2003 Hi Etko,i do not have Reason 2.0 but I think it will work perfectly with a midibox if you configure both correctly. If you are planning to build a midibox but are not sure yet what you need, you could try to use vmidibox64 (see serge.ucapps.de) at first to configure and test the connection between your pots and buttons, and the Reason functionality. Vmidibox64 is a program that partially emulates the functionality of a hardware midibox by software. If you have defined the knob settings in this program you could later dump them into you hardware midibox.You probably need the MidiYoke driver to be able to link vmidibox to Reason without a midi loop cable.Good luck,Serge Quote
amando Posted February 13, 2003 Report Posted February 13, 2003 Yes, midibox it's the perfect partner for Reason 2.0, you will want build a lot of midiboxes for a total control, I have some sisex archives (free for all) ready configured to work with Reason, for example you can control ALL parameters of Subtractor at realtime or Redrum or the mixer, or configure it at your way, but unafortunately the best piece of Reason, the sampler NN-XT have not midi* implementation, only works with mouse. Up to 4 matrix sequencers can be controled whith one knob, ALL 32 paterns (buttons too can do it).* NN-XT have a very basic midi implementation. Quote
etko Posted February 13, 2003 Author Report Posted February 13, 2003 Thnx for usefull informations. I tried Virtual MidiBox with Reason and it work perfectly!! Where can i find SysEx for Reason?? Quote
amando Posted February 14, 2003 Report Posted February 14, 2003 Are on the way to Serge, soon available on the web. Quote
serge Posted February 15, 2003 Report Posted February 15, 2003 Hi,you can download the sysex files for Reason by Amando here :http://users.pandora.be/sdrsite/sites/serge/vmidibox/dev/presets/ReasonMidibox64AmandoSysex.zipThanks Amando !!!Regards,Serge Quote
Guest HELDER Posted August 20, 2003 Report Posted August 20, 2003 Hello,can you help me how to program the pattern of the Matrix Sequencer with the buttons of the MB64?Thank you,RegardsHelder Quote
Guest Jost Posted January 6, 2004 Report Posted January 6, 2004 Yes, I am haveing the same problem, but with the bank select buttons on the drum computer. Each button is about 4 cc values apart. For example:Button Value1-----------12-----------43-----------84-----------12All your pattern select buttons should have the same CC#, but change the [###] . Also make sure the button is set to mode 0I am not sure how to get the bank select to work.Anybody have any ideas?Good Luck! ;)-Jost Quote
uclaros Posted January 6, 2004 Report Posted January 6, 2004 If i understand correctly, you need to assign your buttons on the same CC#.Set them to On Only.Set them to send value 0 the first, 4 the second, 8 the third and so on with the vmidibox.That should do! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.