DavidBanner Posted November 2, 2006 Report Share Posted November 2, 2006 given the new ROHS rollout, what happens if one were to repair an old solder point and the two styles of solder end up mixing.Is this likely to cause reliability issues? What about production line soldered joints, are the lead free lines running at higher temps? Quote Link to comment Share on other sites More sharing options...
Screaming_Rabbit Posted November 2, 2006 Report Share Posted November 2, 2006 given the new ROHS rollout, what happens if one were to repair an old solder point and the two styles of solder end up mixing.... no problemWhat about production line soldered joints, are the lead free lines running at higher temps?... yes, if I rememer right, about 15-20°CGreets, Roger Quote Link to comment Share on other sites More sharing options...
doc Posted November 7, 2006 Report Share Posted November 7, 2006 Oh boy ... ROHS !!!I hate it.I bought some new ROHS tin and tried it.After that I bought all "old" roles of non ROHS tin I could get.For my purpose I don't like this new tin... Those good old shiny spots on the boards look much better than the new ones. ::)greetsDoc Quote Link to comment Share on other sites More sharing options...
Screaming_Rabbit Posted November 8, 2006 Report Share Posted November 8, 2006 After that I bought all "old" roles of non ROHS tin I could get.... as far as I know, it should be no problem in the future, to still get non ROHS soldering tin.Greets, Roger Quote Link to comment Share on other sites More sharing options...
doc Posted November 9, 2006 Report Share Posted November 9, 2006 .. as far as I know, it should be no problem in the future, to still get non ROHS soldering tin. These are good news. But I have now lots of them. You'll never know!greetsDoc Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.