Jump to content

Pot value


jeroddumas

Recommended Posts

Thay should. As you have 5V, the 10k pots are working at 0,5mA. The 100k pots will work at 0,05mA, which should still be enough to work fine.

If you have the time, just try it out with some Trimmerpot or similar, then you can be sure (but clamp all the unused inputs to ground !!).

I once built an analogue synthi, and nearly all pots inside there were 100k at about 5V to 12V. Worked out fine there, why not here.

Also use a metall frontpanel and clamp it to ground, then youre certainly going sure.

Link to comment
Share on other sites

I cannot recomment 100k pots because of the high impedance, the current drain will be so low that external noise can influence the measuring results too much. The result: jittering pot values. So, best values are around 1k and 10k.

Best Regards, Thorsten.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...