All Activity

This stream auto-updates   

  1. Today
  2. midiphy SEQ v4+

    What I wanted to add: great work by everyone involved!!I was really enjoying building the sequencer, and using it is a pleasure!
  3. Hi Jose, no problem! In FX Duplication menu it should work like this: Number of additional channels: 1 Port: e.g. USB1 FirstChannel: Channel number on the USB1 "port", e.g. channel number 1 Then you will get a copy of the note data of that track on USB1, Channel 1. If you set up a higher number of additional channels, more channels will be used on that port to clone the note data - that makes no sense for recording, but in scenarios where you might want to output the track e.g. to multiple synths so that they would "layer" your sounds this is a nice feature. Best regards and have fun! Peter
  4. Thanks for your response Peter, I was thinking about that; yesterday tried to install x64 midi drivers without success, but I have a spare x86 machine with drivers already installed to test it. Regarding FX Dupl., I was looking into the manual and it is not very clear to me, can I just duplicate a track to a single different destination channel or I need to set it up for >1 channels? Thanks in advance !  
  5. Hi Jose, probably not related to your MOTU interface, but what you can do (and what any new SEQ software supports) is to shadow-output track MIDI data to another port/channel. So, you could basically just attach your SEQ to your computer (cubase will see it as four MIDI USB ports) and duplicate the MIDI output to relevant USB Ports and channels. Thus, capturing should be quite easy. To activate it, within your SEQ go to MENU -> FX -> Dupl. and set up a duplication target for every track. Have a great day and many greets! Peter
  6. Hi all, I've been using MidiBox as my main sequencer for several years now and always thought of recording my live performances in midi format.  Until now I was using all the 4 midi outs I have installed but since a couple of days I remapped all the tracks to OUT1 and set the midi channels accordingly.  What I'm looking for is to record midi data live while it's being sent to my machines, on the fly, to record all the mutes and changes. I'm trying to do it using an ancient MOTU interface using the "merge all" mode capturing one of the outputs with Cubase but all I get is midi garbage, stucked notes and so on. Not sure if it has to be with the Midi interface not able to process all the midi data.    MIDIBOX -> MOTU-> MIDI DEVICES/COMPUTER   Any of you is recording live midi data with external outboard/DAW?   Many thanks in advance, Jose
  7. Yesterday
  8. MIDIbox SEQ V4 Release + Feedback

    Yess, that would be nice, I'm always wondering where my sounds come from!
  9. midiphy SEQ v4+

    @lukas412 Looks very nice! Congrats to #20! Many greets, Peter
  10. Last week
  11. MIDIbox SEQ V4 Release + Feedback

    Feature request: Using the Midiphy build In drum mode while Inst is selected flash button for instruments that are playing notes when the note plays.
  12. midiphy SEQ v4+

    @lukas412 looking great! We are indebted to Adrian for his awesome work on the case @knochenfabrik I figured, but thanks for the clarification. When the rack ears are ready it should work to mount directly that way, but nicely done with the hack/workaround!
  13. midiphy SEQ v4+

    Actually you are right - I had to remove the rails and inserts of course (ur just use none). Got that wrong in my mind when I said they stayed insied earlier...
  14. midiphy SEQ v4+

    Here's another one! What a fun build. The engineering is incredible. Thanks to everyone involved!
  15. Troubleshooting midiphy SEQ v4+

    Does anyone know what the part number for the Green LED in the Midiphy kit is? I broke one of mine and was going to order another set from Midiphy but the shipping is really steep to the USA for such a cheap part. thanks, Luke Edit: Midiphy are amazing I had a whole additional bag of LED's because they send you extra in the kit!  
  16. midiphy SEQ v4+

    @knochenfabrik looks really great in the case, very cool! Many greets, Peter
  17. midiphy SEQ v4+

    Indeed! The line drivers would actually "buffer" the SRIO a bit, but as long as the cables are short it should still be okay. The other option of using line drivers (if required) is to omit the DB-25 connector and use the IDC instead. The ribbons would take less room.
  18. midiphy SEQ v4+

    Could I just remove the Line Transmitter completely and use IDC cables to go directly from J8/9 to a DOUT board and J19 to an AOUT-board?
  19. midiphy SEQ v4+

    The rail and threaded insert stayed, I just left out all the screws that go in at the front and at the back of the SEQ4+ case, but there actually would have been enough space to let them in and still fit I think (its just easier to fit this way). Not using line drivers sounds very interesting, I`ll have to look into the expander-thing more to get what you say, but thanks for the information :-).
  20. midiphy SEQ v4+

    Well that's an awesome photo! Presumably you had to remove the rails/threaded inserts? But sure, everything should fit in 3U. There's been promise of ears for 19" rack mounting for a while but those are still on the way. Not long until the modules are ready. But summer holidays can result in a slowdown sometimes. Btw. with everything in the case like this, probably you wouldn't need to use the line drivers at all. Just connect J8/9 and J19 to the respective digital and analogue expanders.
  21. midiphy SEQ v4+

    Hello guys, I dont know if this fits here but may I ask if there is any news on the Eurorack Expander Modules? Also, here is some bad-ish foto of some studio action. The midibox-case fits really well into 84hp and powers well from the 5V source of my Intellijel PSU. Just in case if someone was wondering if the SEQ4+ is suitable for modular case installation. I am using standard 40x20x2 aluminium angles for the rack mounting. Next step: Re-open the case and install the missing jumper for USB OTG :D. Greetings, Alex  
  22. 19" Rack MBFM with extended frontpanel

    I tried to create something with the SRs directly on the board - there is really little space between all the switches. :D With a classic Diode Button matrix it would make much more sense and i could choose between much more available switches/button caps. Not to say, that spst switches might be cheaper and easier to wire. It would also make much sense, to change the wiring of switches and encoders to different SR and SR pins, to bring the SRs closer to where they needed and to avoid a spidernet going from everywhere to everywhere across the board. I made a new schematic utilizing a 4x6 diode button matrix, that might be more efficient than the standard wiring. MBFM_Frontpanel_PCB v.05.pdf It uses 4x 74HC165 SRs (DIN) and 3x 74HC595 SRs (DOUT). I will use SO-16 Packages. For the resistors i'm not sure which package might fit best, maybe a resistor array might be the best choice, for the ease of soldering. Atm i'm just sourcing which package type for the array might take the least space, while still being solderable by hand. Any advices? In a next step i would like to change the behavior of the "Ins/Op Select" and the 4 "Ins/OP [1...4]" buttons and would like to replace them with a 2x4 matrix for 8 dedicated "Instr [1...4]" and "OP [1...4]" buttons. But all this is worth nothing and becomes a dead end eventually, as long as i'm not able to modify the code. I downloaded Notepad++ and the toolchain explained in the wiki, but when i dig into the files i do understand nearly nothing, i'm a complete programming rookie... I didn't even understand how to compile - but i'll try hard. Is someone willing to help me with the configuration and compiling of the code?  
  23. MidiBox DAW Controller

    I'd strongly recommend to not use "normal" LEDs. It's much easier to use WS2812 RGB LEDs. Only one single data-line needed instead of 11 (in your case). And routing LED-matrix on a PCB is cumbersome....  Apart from that I can not answer your question...
  24. MidiBox DAW Controller

    Hi! and sorry for double post...   I have a question : Is it possible to get use the same DOUT Matrix for LED rings AND general purpose LEDs (like switch status)? Say i have an 8*16 Matrix and only want 11 LEDs for my rings, I could make use of those 5 left columns... After half a day searching it seems impossible, but i can't be sure... If not possible, then i might change my plan a little bit.   Thanks!   Thomas
  25. MidiBox DAW Controller

    Yeah, that's what i thought. But anyway, moving faders will probably be the last step of my build. First i'd like to get Switches, encoders and LEDs working. Thanks again!   Thomas  
  26. MidiBox DAW Controller

    Yes obviously So @totoRaymond you will need single linear track moto-fader ;)  
  27. MidiBox DAW Controller

    By using highend dual track motor fader with one servo track (linear taper) and one audio log track Best Zam
  28. MidiBox DAW Controller

    really? then how do you get the position from the faders? You use 'dual taper' fader, one for the audio and the other for AIN? Best
  29. Load more activity