Leaderboard

Hi everybody! The custom keycap were arrived. again, thank you guys for this "+", and the amazing case that comes with!

I finally installed the two OLED which were missed, it's clearly better than regular LCD. I made some wood sides too, in a very hard African wood which has blue veins , I stained in white("lasure" in french not sure of the English word). This is more white in the daylight, outside. Here the DXF file, A CNC is necessary. Yellow is internal cur at 5mm depth. Green is internal cut at 3mm depth. Red is external, depends on the desired thickness. White is holes. Blue is internal, let 2-3mm minimum it depends on your wood hardness, you can also increase it if you can find some longer screws. All is with a 3mm wood tool. https://www.cncfraises.fr/-carbures-2-dents-droites-queue-3-17/69-fc2dd317.html A raw pair, with a view of the internal milling. note: original white side plates must be removed. Best regards Bruno

I'm interested,... but the LED window is way to small for me. So I don't think this is an option for me, although I understand the feeling about the shining through the neighbour knobs. Last weekend I did my first gig with the sequencer, There was a lot of smoke, lasers and other flashing lights and I totally loved the big coloured buttons, it felt very sturdy/secure! So obvious what you are doing :)...

Was just saying to Hawkeye that I might do an SMT soldering tutorial using hot air and solder paste if you guys think it would be useful. That might make it more accessible for people as I don't even trust myself with the drag method using an iron! Hot air stations can be bought for pretty cheap these days (about 30 euro) and it certainly takes less skill imo. It was actually recommended to me by Sauraen for the MIDIbox Quad Genesis and I quite like it. I can't wait to build this guys, the MB-6582 set a benchmark for eye candy for a MIDIbox project, the eye candy and feel of the SEQ V4+ has set a new benchmark imo.