Schrittmacher

Wie siehts aus? Kommt nun jemand? Sonts muss ich den Termin canceln. Der Raum ist dann wieder frei! Bitte jetzt valide und sicher Zu, oder Absagen. Danke. Grüße, Marco

So, ich kann einen Termin nennen wo der große Raum neben mir frei wäre. 28.11 Wie wäre der ?

Servus miternand.... Soso, ihr wollt euch also bei mir treffen! Ok, klar können wir machen. :-) Ich habe gerade eben noch mit meinem Obervermieter hier gesprochen, und er schaut mal in seinen Terminkalender. Es wird auf alle Fälle ein Sonntag. Genaues Datum werde Ich hier, bzw. Torsten dann posten. Ich fasse mal schon kurz zusammen: Es wollen kommen: nILS fairplay TK Damian.... hier weiß ich leider den Namen aus dem Forum nicht. Hat heute auf dem Treffen Interesse bekundet. Schrittmacher... mich zählt mal nicht mit. phunk bleiben noch 2 Übrig...... Bis denn erst mal beste Grüße Schrittmacher Marco

Yes, i have the same Idea! Would gives more oversize. Is there a Problem to duplicate the LCD´s? How long can be the Wires to the external Box? Servus,

Ok, so far! I saw the Youtube Video an i think the Knobs Solution won´t work for (Wurstfinger) wide-fingers. It´s a Touch Panel..... why not touch direct into the MBSeq Display. A tap on a note in the Display poups a dialog to choose the right note. A dropdown dialog! This creates more Space for other important Buttons! Only a suggestion! Nice works TK.... looking forward until the Ipad Launch in Europe Marco

The MacOS Client is for free!

wow thorsten ... I tried in the past this nice programm IPMidi This work very fine with all computers with ethernet and ipmidi. greets.. Marco

Jawoll High Commander.. it works. :-)

The link doesn´t work! Marco

can anybody send me the beta16 .. i deleted this .. :-(

Hello, just tested the new release, but i have problems! I created som folders on my SD card like discribed on the changelog... but when i create a new session, i can´t load anything! The patterns are lost, and in the patterns screen i can choose nothing .. every group looks like so .... pattern A1... nocat for every group and every bank ... the first session that i create works i can load my patterns but the patterns screen looks also different as seen in beta16 Version I don´t no what im doing wrong? For troubleshooting i make a screenshot of the SD Card state Folder 1 contains MBSEQ_B1.V4... MBSEQ_B4.V4 the old one from the beta16 Folder 2 contains MBSEQ_B5.V4... MBSEQ_B8.V4 correctly renamed to MBSEQ_B1.V4..MBSEQ_B4.V4 Sessions1 and Arp2 are Sessions that i create under EXIT> Create new....

for me too....

MISTÂ !

is the PCB still avaiable? I would buy wilbas set!Â

Hey Julian, oustanding work! I would buy a Panel for my Seq V4. I send you a PM with more Details! Cheers, Schrittmacher

mimimi, mimimimimi, mimimiiiiiii

Hi, at first, no apologizes are necessary! :-) That´s right, you must connect J4 and J2 ..and for the Midi-In function you need additionally still a connection between Pin 1 on the Core and R1 on J2 see also here: But one suggestion: You should take the STM32 Version ... you have 2 In and 2 Outs on the board without using IIC Module .. that spare many times for you and save Money! And don´t forget a USB plug for Midi and Softwareupdates The V4 Version of the SEQ is more flexible as the old one V3 ... Drumtrack´s .. more Layer´s more Step´s .... more more more. :-) All is compatible with the old Design .... all this for 25,99 USD + parts, the STM32 is presoldered! Look here: SmashTV´s Shop Ok now is up to you.... :-) have fun.... Marco

The paneldesign is only up to you..... The Default Design based on the Paneldesigner from Shaeffer you can found here: Default .fpd File (right klick to download) here the Paneldesigner (only Windows) Paneldesigner Some nice Midiboxes.... Designs my own SEQ V4

take this....... http://www.voti.nl/shop/p/SW-ROT-01.html very cheap and the right pinning for the Midibox Stuff! Cheers too, Marco

Falls du es noch nicht gefunden hast! Ändern kan nst du das ganze unter Audio-Midi Setup Dort unter Midi das entsprechende Gerät anwählen dann oben in der Menüleiste unter Info kannst du dann bei Gerätename eintragen was du willst. LG Marco Welcome to the MacOs World

Ask Polykobol for this! :-) He has a lot of Expirience with damgaging PIC´s. LOL Sorry Francois, but this must be it. :-)

I´ve tested the BLM-Scalar remote... it works perfect. It shows the new possibilities of the Remote app. Thorsten i love this thing :-) the response is very fast. i am looking forward for new funktions. P.S My mandolane trail is running out, and i have tested the mios 9.0 in my Parallels Enviroment. It works good with one exception, the core should *NOT* connected thru a USB HUB. I use under Parallels Windows Xp with SP3 and the latest Java Runtime. Thanks TK for this

I am Interested

For sure, that is an Clockfeedback! In Live you can use only one Method of syncing. Ableton as Master or as Slave! When you check both options in the Midi Dialog the Result is an Feedback. Regards Schritti

Ok i had a suggestion for a new content on the lenght dialog on the Lenght page. It is possible, to fill the empty Space in the Left Display behind the Button 4 labled with Loop 1 In order to use a Quick selection for Looppoints i would be nice when i had a few points more in the dialog On Step 5 labeld with Looppoint 9 means when i push GP Button 5 it will be loop the Step 9 - 16 immediatly Example: On GP Button 7 Loop at 9 .... that will be Loop the Steps 9 - 16 On GP Button 6 Loop at 17 .... that will be Loop the Steps 17 - 24 On GP Button 7 Loop at 25 .... that will be Loop the Steps 25 - 32 On GP Button 8 Loop at 33.... that will be Loop the Steps 33 - 40 For me i think that´s ok for the most common Step Lenght at max 32 Steps that i use. The Name can be Quick Loop Points or so ! There a 19 charakters left on this empty field! I hope that would be possible ...... Have a nice Day, Marco