bleeptor Posted September 24, 2009 Report Share Posted September 24, 2009 It's a little bit confusing what are the options for building the MIDIbox SID. I don't want to build a huge project I just want to make some drum sounds with this 6581 chip that I have.I've some experience hardware hacking, but none programming chips, so I think the MIDIbox requires some programming, is it super hard? Should I quit? Someone please help me! Quote Link to comment Share on other sites More sharing options...
SLP Posted September 24, 2009 Report Share Posted September 24, 2009 Welcome aboard, bleeptorplease read through ucapps.de, the dokuWiki and the forum.Everything you need to know can be read there.You don't need ANY programming skills. As long as you know how to solder, you're alright.You might also have a look at this project:http://www.midibox.org/forum/index.php/topic,14079.0/topicseen.htmlregards, matthias Quote Link to comment Share on other sites More sharing options...
nebula Posted September 24, 2009 Report Share Posted September 24, 2009 ... and this makes it ridiculously easy Quote Link to comment Share on other sites More sharing options...
nILS Posted September 24, 2009 Report Share Posted September 24, 2009 Teehee, nice link :-) Quote Link to comment Share on other sites More sharing options...
SLP Posted September 25, 2009 Report Share Posted September 25, 2009 ... and this makes it ridiculously easywhich is basically the same ashttp://www.midibox.org/forum/index.php/topic,14079.0/topicseen.html Quote Link to comment Share on other sites More sharing options...
Smithy Posted September 25, 2009 Report Share Posted September 25, 2009 IM guessing he'll have to upload the Drum engine app .hex file on its own intead of the full SID app?Will that work? Quote Link to comment Share on other sites More sharing options...
nebula Posted September 25, 2009 Report Share Posted September 25, 2009 @SLP: my bad Quote Link to comment Share on other sites More sharing options...
Wilba Posted September 26, 2009 Report Share Posted September 26, 2009 IM guessing he'll have to upload the Drum engine app .hex file on its own intead of the full SID app?Will that work?No, the Drum engine is just one of the four engines in MIDIbox SID Synth V2, not a separate app. It even has a sequencer! Quote Link to comment Share on other sites More sharing options...
Imp Posted September 28, 2009 Report Share Posted September 28, 2009 If you don't want to use the other engines, just ignore them...it's much easier than removing them from the code..You could save patch #1 as a blank template with the drum engine enabled, so you don't have to switch everytime you turn on the device. Quote Link to comment Share on other sites More sharing options...
Smithy Posted September 28, 2009 Report Share Posted September 28, 2009 No, the Drum engine is just one of the four engines in MIDIbox SID Synth V2, not a separate app. It even has a sequencer!Cool, in that case so its a bit harsh to say everything he needs to know is on the site,because that question has never been addressed before im pretty sure.I remember flex wanting to do a bassline only MB Sid, but i think nils has to do a bit of coding to have that as a seperate app. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.