MINI-DIN x4 3,3x5 cm

[latigid on]

Just one more option for you and I'll leave you to it:

 

http://www.mouser.com/ProductDetail/Molex/15-91-3100/?qs=sGAEpiMZZMs%252bGHln7q6pm0R%252bIqgWC%252bQxWX5n0pt9Cpo%3d

 

With SMD headers you could have one connector on the top and one on the bottom of the board.

Edited January 13, 2015 by latigid on

[Phatline]

double sided headers:

in much cases you would have to unmount the complete board to unplug it... (when you dont have the depth, and the pcb sits near the mount surface)

its a nother story if you consider to take 90° Headers @ the outlines of the pcb, there you could unplug it in more cases, but you still would need more place, because you could not place the Headers one below the other (Because of the cable)- so you have to place it on different XY coordinates, and this would destroy the benifits off the whole idea of double sided headers....

its still possible in the current layout to choose 90° headers, to better stack this modules...

 

just my 2 cents... in the german tread :rofl:

[FantomXR]

Yes. But its up to the user if he wants 90 degree header or normal ones.

Anyway: as long as nobody is able to confirm the schematic I won't go on with this project. Don't want to waste money...so fresh eyes on the layout could save time and money ... For everybody :-)