STM32F4 with quad IIC midi for mbseq v4

[zephyrin]

Hello

 

I want to finish my mbseq V4 with the new core STM32F4

i m not sure that i need 4 midi input so i wanted to know if i could used the quad IIC midi board with the STM32F4 for have 2 input midi and 6 midi output and the BLM output (2 input and 2 output midi come from midi I/O board for STM32F4)

 

Zephyrin

[eptheca]

yes, that will work fine

[Rowan]

That is the exact configuration I have with my STM32F4 based MBSEQ and it works great.

[Lamouette]

TK said to me that the BLM use the 2nd I/O port, so you cannot use it. (in my case i added a Aout_NG)

 

[eptheca]

I think because Zephyrin is only using one MIDI I/O board with 2 MIDI IN, the BLM can use the 2 MIDI INs that's left.

 

I don't have this setup, so I can't confirm it, but that's how I understand TK's answer in the thread you linked to

[zephyrin]

Yes i don't need BLM.

[=FFW=>]

sorry for hijacking this thread but i have a question regarding the Midi In/Out Options along with the new core board:

 

Is it possible to have eight OUTs / four INs when using the STM32F4 core?

 

- two Midi I/O modules (four INs/OUTs)

- one Quad_IIC module (four OUTs)

 

 

cheers and thanks!

[eptheca]

You can even have 12 MIDI OUT.

2xI/O

2xQuad IIC

[=FFW=>]

thanks for that information, eptheca!

great :smile: