Altitude Posted October 30, 2015 Report Share Posted October 30, 2015 (edited) So I've been had this in the planning stages for a couple of years now and with the advent of the line driver and BLM, now was a good time as any so I got it done.So this is:STM32F4 core1x midi IO1x Line Driver1x quad IIC (BLM ready)I used the 3F Mec parts for the backlit buttons and hand wired LEDs (not that fun), Worked out well, it would be nice to have a rev of the CS board that does have them wired up, the other foot print does and the MEC footprint has the holes but they are not connected to anythingall in a nice 42mm thick CNC caseTotal current draw: 300 mA Edited October 30, 2015 by Altitude Quote Link to comment Share on other sites More sharing options...
Rowan Posted October 30, 2015 Report Share Posted October 30, 2015 Looks good!. I'm very envious of you having direct access to the STM32F4 core's on board USB port, it's one of my bugbears that there is no easy way of getting access to it in my case.How much did the case cost to have made? Quote Link to comment Share on other sites More sharing options...
Altitude Posted October 30, 2015 Author Report Share Posted October 30, 2015 $300 Quote Link to comment Share on other sites More sharing options...
eptheca Posted October 30, 2015 Report Share Posted October 30, 2015 Great work. Looks sweet. Love those buttons. Thanks for posting the pictures, Quote Link to comment Share on other sites More sharing options...
Rowan Posted October 30, 2015 Report Share Posted October 30, 2015 $300if that's including the front and rear panel that's a reasonable price. Quote Link to comment Share on other sites More sharing options...
Altitude Posted October 30, 2015 Author Report Share Posted October 30, 2015 that's everything. In hindsight, I wouldnt do the blind studs again, the accuracy of those was a little on the loose side and required some board convincing to get right, that would have lowered it $35 Quote Link to comment Share on other sites More sharing options...
latigid on Posted October 31, 2015 Report Share Posted October 31, 2015 Great work! Which company made it? Did you do the infill yourself? Quote Link to comment Share on other sites More sharing options...
Altitude Posted October 31, 2015 Author Report Share Posted October 31, 2015 (edited) CAM expert but it's the same type of enclosure as Front Panel Express/Schaeffer offer. They do all the infill Edited October 31, 2015 by Altitude Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.