WingMa Posted March 24, 2018 Report Share Posted March 24, 2018 I bought everything but need to know what compatible what? Thorsten no be here or I can get him... I have two MF_NG modulet and two different motor pot https://www.conrad.com/ce/en/product/442094/Motorised-fader-----5-k---------02-W-----linear-----ALPS/?ref=home&rt=home&rb=1 https://www.conrad.com/ce/en/product/442081/Motorised-fader-----10-k---------05-W-----linear-----ALPS/?ref=home&rt=home&rb=1 Can I use it one board? One is 5kOhm other is 10kOhm I need 12 60mm and 2 100mm Next I bought smashtv a lpc module with kit but don't have The LPCexpressso chip! I find this https://www.lextronic.fr/lpcxpresso/14902-module-lpc1769-lpcxpresso-board.html I know only if not A or B part I need to hack the wireing but it's absolutly campatible with how to on uccaps.de Quote Link to comment Share on other sites More sharing options...
Zam Posted March 24, 2018 Report Share Posted March 24, 2018 Hello WingMa You can use both ALPS fader you show, mixed at same MF_NG should not be a problem. Best Zam Quote Link to comment Share on other sites More sharing options...
WingMa Posted March 24, 2018 Author Report Share Posted March 24, 2018 Sure? Thanks a lot Go to buy :) Quote Link to comment Share on other sites More sharing options...
WingMa Posted March 24, 2018 Author Report Share Posted March 24, 2018 And LPC Core???? Quote Link to comment Share on other sites More sharing options...
WingMa Posted March 24, 2018 Author Report Share Posted March 24, 2018 And how can I set what is 10 what is 5 Kohm on mios studio have no options for this Quote Link to comment Share on other sites More sharing options...
WingMa Posted March 24, 2018 Author Report Share Posted March 24, 2018 Just now, Zam said: Hello WingMa You can use both ALPS fader you show, mixed at same MF_NG should not be a problem. Best Zam No need to change any resistor or something else? Just connect the two different pot and this will be work? Quote Link to comment Share on other sites More sharing options...
Zam Posted March 24, 2018 Report Share Posted March 24, 2018 11 minutes ago, WingMa said: No need to change any resistor or something else? Just connect the two different pot and this will be work? Yes, it's a voltage divider, it will not change what voltage the AD see... and the load difference is marginal here for what we need. Best Zam Quote Link to comment Share on other sites More sharing options...
WingMa Posted March 24, 2018 Author Report Share Posted March 24, 2018 And in software set the two pot same? Quote Link to comment Share on other sites More sharing options...
WingMa Posted March 24, 2018 Author Report Share Posted March 24, 2018 And thank your answers I’m really gratefull ;) This forum a bit died... Quote Link to comment Share on other sites More sharing options...
FantomXR Posted March 24, 2018 Report Share Posted March 24, 2018 3 hours ago, WingMa said: And thank your answers I’m really gratefull ;) This forum a bit died... No! You are flooding the forum with questions. Most of them can be answered by carefully reading all sites on ucapps and the forum. And if you have any questions, there are people who help you here. But don't expect to get an answer within a few minutes or hours (like the personal messages you wrote me). Quote Link to comment Share on other sites More sharing options...
WingMa Posted March 24, 2018 Author Report Share Posted March 24, 2018 (edited) I don’t think you are right! I bought something before ten years after this so many changes! I have time but I think easier if somebody go away that what I stopped, simple write her/him experience! I have 3 different board with so many question but no answer! I am so many forum and if I have answer don’t sorry the time and share my experience... We are different it’s ok but I have 3 topic and 2 half answer is not to much! I have tour and I would like to proceed but not help for experied pepople! It so strong to write 2 rows about my questions? Edited March 24, 2018 by WingMa Quote Link to comment Share on other sites More sharing options...
WingMa Posted March 24, 2018 Author Report Share Posted March 24, 2018 (edited) Ok it’s diy project but why can do together??? Yours work my is with so many fault.. Edited March 24, 2018 by WingMa Quote Link to comment Share on other sites More sharing options...
WingMa Posted March 24, 2018 Author Report Share Posted March 24, 2018 I have more the 1000 euro in this project, i thing not so much my question, I need help after ten years I was lagging! And the forum somebody write this the other write other I need the workable... Quote Link to comment Share on other sites More sharing options...
WingMa Posted March 24, 2018 Author Report Share Posted March 24, 2018 I seat at my bed and reading all of ucapps all of forum and wait your or forum answers but nothing! Motor board maybe ok but I have core without brain because now can’t buy the original? My question: what can I do? Answer: what I finded is not fit other no experience! So what can I do now? Quote Link to comment Share on other sites More sharing options...
WingMa Posted March 24, 2018 Author Report Share Posted March 24, 2018 (edited) Please read the MA lighting forum! You have a question 10 minutes and get the complete solution for me or other... I’m not a robot engineer but need your project but I can’t do it alone Edited March 24, 2018 by WingMa Quote Link to comment Share on other sites More sharing options...
Psykhaze Posted March 25, 2018 Report Share Posted March 25, 2018 (edited) Please stop flooding and complaining. Take your time to understand ucapps and wiki, read things and instead of triple posting make a consistent post instead. regards, Jerome Edited March 25, 2018 by Psykhaze Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.