MB909 help

[kid303 0]

Does anyone have any info for the MB909 sequencer for the 9090 TR-909 clone.

I need to know how it was connected to the STM32F4 core board as I only have a wiring diagram for the LPC17 core.

 

Thanks

[Antichambre 196]

Should be the same... ;)

Best
Bruno

[chriss 0]

Hi.
Has anyone a working mb909 firmware (the one from jef) for the lpc17 Core. I found the directory on Github but i am Not able to compile. ( If its compilable anyway!).
There must be a hex file on someone’s harddrive out there. 
thanks Chris’s 

[Phatline 81]

1 hour ago, chriss said:

Hi.
Has anyone a working mb909 firmware (the one from jef) for the lpc17 Core. I found the directory on Github but i am Not able to compile. ( If its compilable anyway!).
There must be a hex file on someone’s harddrive out there. 
thanks Chris’s 

send me the source-files (or give me a link), and i compile it... (but dont ask me about the firmware, didnot used it, nor i was involved in it...)

Edited Tuesday at 03:29 PM by Phatline

[chriss 0]

Thanks phatline. 
here is the Link: https://github.com/midibox/mios32/tree/master/apps/sequencers/MB909

hope that Works  

chriss 

[Phatline 81]

29 minutes ago, chriss said:

Thanks phatline. 
here is the Link: https://github.com/midibox/mios32/tree/master/apps/sequencers/MB909

hope that Works  

chriss 

mb909hex.zip

STM32F4 and LPC17 build.... i got some warnings when building LPC17 --- so try it out.

[chriss 0]

Hi Phatline,

thanks for the work.

Unfortunately this does not work. 

Anyone else with an old firmware on the HD?

Chriss

[chriss 0]

Ok i found the files on the:  9090 Project (the TR-909 clone) facebook group. You need to be member of facebook though 

Christ.