mfk Posted May 2, 2020 Report Posted May 2, 2020 Endlich! https://www.amazona.de/test-midiphy-midibox-seq-v4-diy-sequencer/ 2 Quote
latigid on Posted May 2, 2020 Report Posted May 2, 2020 Wow, was very nicely written and explains everything well. Thanks for the heads-up! Quote
Hawkeye Posted May 2, 2020 Report Posted May 2, 2020 Yes, that's very nicely written! Many thanks to Robert! Many greets, Peter Quote
ilmenator Posted May 3, 2020 Report Posted May 3, 2020 Finally someone spreads the word. But apparently they got the price tag wrong. It's listed a costing € 599,-, hopefully it doesn't turn people off when they realize that that is just the essential kit alone. Quote
mfk Posted May 4, 2020 Author Report Posted May 4, 2020 When I look at the amount of smd-components, that's what scares people.... ;-) Are the old PCBs actually still available? I like the new design, even if I think a few more buttons would be more practical. But even with my hobby skills, I don't dare to take on the new project. I should just do it ... Quote
Hawkeye Posted May 4, 2020 Report Posted May 4, 2020 @mfk really, no need to be afraid of it - you can easily do the large scale 1206 SMT soldering! In fact, the solder pads for resistors and caps to me seem to be bigger than those for the classic THT components. And there's no need to turn around the PCB all the time and to cut pins. As a bonus, you can store a whole assortment of SMT resistors and caps in really small boxes and don't need much storage space for them - also, with the drag soldering method (shown e.g. in the LoopA video tutorial), installing ICs is really very simple and super quick. We've even had a few requests of builders recommending us to get rid of the THT resistors in future PCB revisions, as cutting their legs was slowing down their assembly! :) It probably won't happen, as Andy often uses them as "bridges" over traces, i.e. the classic resistors then offer another layer to the PCB which simplifies routing. Have a good day and many greets! Peter Quote
latigid on Posted May 4, 2020 Report Posted May 4, 2020 @mfk your skills will be just fine! All of the parts are huge by SMT standards and several builders have completed even with no prior DIY experience. And, as Peter says, there's actually a fair amount of THT there too :) Quote
Phatline Posted May 4, 2020 Report Posted May 4, 2020 6 hours ago, Hawkeye said: @mfk We've even had a few requests of builders recommending us to get rid of the THT resistors in future PCB revisions, as cutting their legs was slowing down their assembly! :) can underline this... a big SMD make less work then THT (when thinking on the BLM 4148 leg bending actions...) 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.