ilmenator Posted April 11, 2006 Report Share Posted April 11, 2006 The subject says it all:I find the new IIC MIDI Module very attractive ;D and I would like to build one of those MIDI routers - but I am still using the JDM (and it works flawlessly on my system). Do I need to switch to the MBHP Burner in order to use this adapter http://www.ucapps.de/mbhp/mbhp_burner_16f88_adapter.pdf, or can I also use the programming adapter in my JDM burner to burn the smaller 16F88 PIC (I already have four of them ;D)??Thanks, ilmenator Quote Link to comment Share on other sites More sharing options...
raphael Posted April 11, 2006 Report Share Posted April 11, 2006 I`m not using my JDM any more, so I cannot test it. But it should work. Please report here if you were successful... Quote Link to comment Share on other sites More sharing options...
lemonhorse Posted June 12, 2009 Report Share Posted June 12, 2009 Just to inform anyone who is afflicted by doubts - It works.JDM (with PIC16F88 adapter => http://www.ucapps.de/mbhp/mbhp_burner_16f88_adapter.pdf) + PICgm (even autodetection is functional :) ).- Lemonhorse Quote Link to comment Share on other sites More sharing options...
nILS Posted June 12, 2009 Report Share Posted June 12, 2009 For anyone who's still in doubt - depending on your burner it might as well work without an adapter (with mine for instance) ;) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.