Jump to content

Phatline

Members
 View Profile  See their activity

  • Posts

    1,279

  • Joined

  • Last visited

  • Days Won

    71

 Content Type 

Posts posted by Phatline

  4. LoopA V2 Introduction, Features & Support Thread

    in MIDIbox User Projects

    Posted

    hey.. would take 2

    . any possibility to load the clips including the ones on disk via program change? and feedback that the clip  is free and virgin? ... i think on some clip launch matrix from external ... in my case blm and triggermatrix.... so program change for songs. bank change for scenes and feedback(a cc state for example) would be enough. to use it in a grown midisetup for live sets. jam it in

     and use it in sets.

    mike

  5. WTB: SEQ v4

    in Fleamarket

    Posted

    23 hours ago, tehsparx said:

    Been lurking these forums for a good 10 months with my eye on a SEQ4 or Social Entropy Engine if that ever gets restocked, would love to get on a bulk buy of the SEQ4+, would prices for a built one+case be similar to current SEQ4 pricing?

    dont know ask in the seq4+ thread... since except the prototypes there are no seq4+ ever built, i dont know the time which is running into building this. but since it is kit there are less time and postage in parts to source, i guess...

  8. WTB: SEQ v4

    in Fleamarket

    Posted

    yes but the frontpanel is just a graphic file (svg) (i think vector graphic)

    so there is material colour, (dont know look at the his building tread, he was using formular or ponoko? they have materials which you can choose)

    i am not into this case, but maybe you can choose the incraveing fill color (or maybe i have to fill it with hand - pain in the ass...),

    because it is vector, you could placei your logo, or band banner on it, what ever, artwork... could look on font styles (but i think they must get transleted to vector graphics...could be tricky)

  9. WTB: SEQ v4

    in Fleamarket

    Posted

    if you are sure. you want that acrylic. i will order it... this weekend i am busy.  could look tuesday on the files and get me the costs and get me informed about that case. until that you have time to look at the other possibilitys... and what can be done (artwork on the acrylic one) bye mike

  10. WTB: SEQ v4

    in Fleamarket

    Posted · Edited by Phatline

    yes i would,

    but

    doing the case later, is a bit tricky:

    because of the LEDs, theyshould have to set to the right length,so they are looking nicelyinto the panel... mine are a few millimentersnow above the pcb,maybe to short for some panels. desolder double sided pcbs is pain in the ass, special when you are new on soldering (hot air, or working with flux paste).... but ok, i could give you some new leds for "later" and mount the whole thing on a wood plate (the modules are not stacked see triggermatrix V1 like: http://wiki.midibox.org/doku.php?id=triggermatrix)-which also would take some time in account, without any panels... and you could do the rest on your own... later. the question is make it sense? not really. it maybe ends up that you never got a case... i already had this cas:

    http://wiki.midibox.org/lib/exe/detail.php?id=triggermatrix&media=phatline:tm-generic-cs.jpg

     

  12. WTB: SEQ v4

    in Fleamarket

    Posted · Edited by Phatline

    thats julianf... and the price and panels which i calculted above

    but: 

    Product Description

This is a set of panels for the desktop encloure. The enclosure itself is NOT included.

    so this is only front an backpanel, but without "enclosure" what means no case   - they panels are for the heidenreich case, which is not in my list

  13. WTB: SEQ v4

    in Fleamarket

    Posted · Edited by Phatline

    yes: with that frontpanels from julianf

    no: when you choose/get a fully acrylic variant, you have to substract the 145€ and take your acrylic panel+case instead

    if you decide for a acrylic solution like this

    you may ask mongrol what he payed,and for the files...

     

     

    other cases... for example....

    or

    or

     

    or

    heidenreich (which was an bulkorder...you may not get the case on this price...)

    ----hope that helps... have a nice weekend.

  14. WTB: SEQ v4

    in Fleamarket

    Posted · Edited by Phatline

    here are some costs that i have already calculated for a other human, that lost his interest after sawing the costs....

    THERE IS NO CASE IN THE LIST!!! search for your prefered casing and the price and how to get and shipping costs and then you have your price: (heidenreich case is the one you saw, but there are a few other case-variants out there, search for it...)

    the time is rated with 15€ the our,  what for me is way to less, and all the parts are the costs you have to pay anyway, also shipping costs for parts,because they come not from one supplier... so this is the absulut minimum you have to invest... i guess most of people will charge you more for it... and so do i.

     

     

    SEQV4 Wilba CS   1 € 0   00:00     € 0  
    seq4 cs pcb € 35 1 € 35 03:00 03:00   03:00 € 35  
    seq4 lcds 2x40 € 10 2 € 20   00:00     € 20 I have - green standard lcd 10 € with black text, other colors backgrounds ar going up to 50 each! But possible
    jog wheel knob € 4 1 € 4   00:00     € 4  
    seq rotary knobs € 2 16 € 24   00:00     € 24  
    seq frontpanel € 145 1 € 145 02:00 02:00   02:00 € 145 i have to order this from http://thebeast.co.uk/?product_cat=midibox because i dont have one
    seq encoder € 2 16 € 24   00:00     € 24  
    case                  
                    € 0  
    Wires + Connectors € 25 1 € 25 00:30 00:30   00:30 € 25 dont know this exactly, well depend on what design we end up – this is without soldering time!
    screws, holder, clue small material € 25 1 € 25 01:00 01:00     € 25 dont know this exactly, well depend on what design we end up
                    € 0  
    Core STM32F407G-DISC1 € 17 1 € 17   00:00     € 17  
    core pcb € 10 1 € 10 00:30 00:30   00:30 € 10  
    core parts € 13 1 € 13   00:00     € 13  
    midi io pcb € 7 2 € 14 00:20 00:40   00:40 € 14  
    midi io parts € 7 2 € 14   00:00     € 14  
                  01:00 € 0 sourcing parts
                  07:40 € 115 time that has already invested
                    € 485 summ for SEQ only

  17. maximum performance - strip down mios32

    in MIOS programming (C)

    Posted

    hey,

    i have a very time sensitive case, where i have to scan a GPIO (DIN) Pin (J5) for ON/OFF states (audio>schmitt-trigger>J5)

    >>> Clock 2 Audio 2 Clock:

    i switched off, what i found, and deleted as many tasks i know... > see code attachment (mios config and app.c)

    what task is best for scaning such GPIO? or can i change priority with switch somehwere --- i have put it into "void APP_MIDI_Tick" up to now... when a new pulse comes in a midi-clock-send signal goes out also...

    the Signal-Pulses on GPIO are 2ms -on-pulses -like shown in this picture

    5b317f81213bb_6ms-latency---2mspulse.thu

    the first and 3rd track are recordet @once where 1st track is audio track,and 3rd track is midi-clock-click, the 2nd track is the overdubbed audio-track driven by the clock of 3rd track --- i have 6ms delay... of course there is also some delay in sound generation and other ways.but there is also quite a bit delay in the c-code...

      

    #include <mios32.h>

u8 clock_trigger = 0;
u8 clock_counter = 0;
u8 audio_pulse_durate = 0;
u8 Start_Flag = 1;
u8 Mode = 0; //0: Sense Midi Clock, 1: Sense Audio Pulses
u8 blink = 0;
u8 count = 0;
u32 count_off = 0;
u8 loose_clock = 0;
u8 count_flag = 0;
u8 Start_sense = 0;


void APP_Init(void){ // set GPIO 
// Set GPIO
  // J5A0 >> DIN  - Pull-DOWN - Audio Input > Sense    Pulses     from Schmitt Trigger
    MIOS32_BOARD_J5_PinInit(0, MIOS32_BOARD_PIN_MODE_INPUT_PD); // Push Down //connect to 5V

  // J5A1 >> DOUT - Push-Pull - Audio Out   > Generate Pulses     for Record
    MIOS32_BOARD_J5_PinInit(1, MIOS32_BOARD_PIN_MODE_OUTPUT_PP);
    MIOS32_BOARD_J5_PinSet (1, 0); // Turn off PIN > init
        
  // J5A2 >> DIN  > Pull-UP   - Record Button
    MIOS32_BOARD_J5_PinInit(2, MIOS32_BOARD_PIN_MODE_INPUT_PU); // Pull-UP //connect to ground

  // J5A3 >> DOUT > Push-Pull - LED
    MIOS32_BOARD_J5_PinInit(3, MIOS32_BOARD_PIN_MODE_OUTPUT_PP);
    MIOS32_BOARD_J5_PinSet (3, 1); // Turn ON PIN > init
}



void APP_Background(void){ // Switch + LED + MODE (play rec) set + Auto-Stop

// /*
    //Scan Mode-Switch //deep88 - Switch Version
    u8 temp = Mode;
    Mode = MIOS32_BOARD_J5_PinGet(2);
    if (temp != Mode) { Start_Flag = 1; audio_pulse_durate = 0;}
        
    //Mode-LED-States (to indicate Mode-Push-Button
    if (count <=  0 ) { blink = 0; }
    if (count >  12)  { blink = 1; }
    if (count >  24)  { blink = 0; count =0 ;}


    if      (Mode == 1) { MIOS32_BOARD_J5_PinSet(3, 1);}     //Turn OFF PIN   -   sensing audio pulses  dumpout midiclock
    else if (Mode == 0 && loose_clock == 1) { MIOS32_BOARD_J5_PinSet(3, 0); }     //Turn ON  PIN  - ready for sensing midiclock - ready for dumpout audio
    else if (Mode == 0 && loose_clock == 0) { MIOS32_BOARD_J5_PinSet(3, blink); } //Blink    PIN  -   sensing midiclock     dumpout audio


    if(Mode == 1) { // sensing pulse mode (send out Clock-Mode)
        // MidiClock Auto-Stop
        if (count_flag == 1) {
            count_off++;
            if(count_off > 200000) {
                count_flag = 0;
                loose_clock = 1;
                count_off = 0; //turn off blink light after loosing Midi-Connection
                 audio_pulse_durate = 0; // Pulse stop duration
                 Start_Flag = 1;
                MIOS32_MIDI_SendStop(32);     //send Stop-Sig - Port-A
                //MIOS32_MIDI_SendDebugMessage("auto-stop");  // DEBUG
            }}}
}   
    
    
    
void APP_Tick(void){ // Timer for Pulse-Output Duration
    if(  clock_trigger == 1 && clock_counter <= 1) {clock_counter++;}
    else{clock_trigger =  0;
         MIOS32_BOARD_J5_PinSet(1, 0);
        }}



void APP_MIDI_Tick(void){       // sensing Audio-Pulses & Dumpout Midiclockdata

    if(Mode == 1) { // Scan Mode-Switch
        
        // First time we get a Pulse, we send out a CLOCK-START-Signal
        if((MIOS32_BOARD_J5_PinGet(0) == 0) && (audio_pulse_durate == 0) && (Start_Flag == 1) ) { // Pulse = HI,  Pulse start duration
            MIOS32_MIDI_SendStart(32);     //send Start-Sig - Port-A

            Start_Flag = 0;
            //MIOS32_MIDI_SendDebugMessage("start");  // DEBUG
        }
        
        // All other Pulses, are just Clocks, without Startsignals 
        if((MIOS32_BOARD_J5_PinGet(0) == 0) && (audio_pulse_durate == 0) && (Start_Flag == 0) ) {//Pulse = HI,  Pulse start duration
            MIOS32_MIDI_SendClock(32);     //send MidiClock - Port-A
            audio_pulse_durate = 1; // Pulse starte duration
            //MIOS32_MIDI_SendDebugMessage("clock-durate-pulse");  // DEBUG
        }
        // Ensure to kill the PULSE DURATION FLAG, after the Pulse is gone....
         if((MIOS32_BOARD_J5_PinGet(0) == 1) && (audio_pulse_durate == 1) ) { //Pulse = LO, Pulse still in duration
            audio_pulse_durate = 0; // Pulse stop duration
            
            count_off  = 0; // reset Midi-Stop-Signal counter >>> for Autostop
            count_flag = 1; // begin to count for Autostop
            //MIOS32_MIDI_SendDebugMessage("pulse-off");  // DEBUG
        }
    }
}



void APP_MIDI_NotifyPackage(mios32_midi_port_t port, mios32_midi_package_t midi_package){ //sense Midi Messages
    
        if(Mode == 0  &&  port==32) {

                // SEQ Stop Signal
                if(midi_package.evnt0 == 252) { Start_Flag = 1; loose_clock = 1; Start_sense = 0; } // when sequencer is stopped: generate midi clock & transport

                // SEQ Start Signal
                if(midi_package.evnt0 == 250  || midi_package.evnt0 == 251) { Start_sense = 1; }// start to react on midiclock

                // SEQ Clock          
                if(midi_package.evnt0 == 248  &&  Start_sense == 1) {//248CLK,250Strt,251Cont,252Stp
                clock_trigger = 1;
                clock_counter = 0; //initate Clock HI-State Timer
                MIOS32_BOARD_J5_PinSet(1, 1); //activate GPIO-Pin J5A Pin 2
                Start_Flag = 1; //reset flag in order to send out a start signal when next AUDIO-PULSE COMES IN
                loose_clock = 0;                
                count++;
                }
            }
    }

     

    thx for perfomance help

    project.zip

  18. Looking for 4x PIC18F452 pre-programmed

    in Fleamarket

    Posted

    16 hours ago, philip_morison said:

    hey really sorry its been a few days getting back, had a bunch of stuff at work goin on. Actually might be better if you could send them to my parents uk address, how do I pay u? via pay pall money transfer?

    philip.morison@ntlworld.com

    this my email address send me your details.

     

     

    you got email...

  21. [FS] mb6582 w 8x SID 9V

    in Fleamarket

    Posted · Edited by Phatline

    with

    original c64 220v psu

    8x 9v chips (4x 8580 4x6582) 3 pairs with 18nf caps 1 pair with 22nf  -  replaceable plug with pinheader

    test video:

    950 incl postage in eu

     

    pump... will go the next days more expensive on ebay (since they want 10%... had a try to avoid it,by post it on diverse alternative sellers,but no luck)

  24. WTB: MB-6582

    in Fleamarket

    Posted · Edited by Phatline

    On 30.5.2018 at 0:26 AM, mikronix said:

    @Phatline im going to need the appropriate power supply to run at 120v. 

    you may look for a9vac + 5vac   usa c64 original psu with original connector...ebay for example.   if you dont think you can handle that . i could modify the circuit but that would need more time and additional shipping costs for the parts . and digital money. which i need to pay my bills...i have more cash and alternativ currents... (exchange groups. time current and so on )...

    anyway if you still want it: i today drilled the frontpanel... but before making a video . i want to upload the newest firmware... but before i need to know from you: quest: what ENGINE do you want - for that inform yourself the posibilities:

    http://www.ucapps.de/midibox_sid.html

     

    i preefer the poly engine instead of multiple parts... would be other when having ledrings....

     

    best mike   

×
×
  • Create New...