![](http://midibox.org/forums/uploads/set_resources_1/84c1e40ea0e759e3f1505eb1788ddf3c_pattern.png)
Screaming_Rabbit
-
Posts
1,431 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Posts posted by Screaming_Rabbit
-
-
Caution!
The only K-Type I can find on the farnell webpage, is LOG. For MIDIbox you need a linear fader.
Greets, Roger
-
I was wondering whether this maybe to do with the touch sensor or not?
...yes. But there are also conductive plastic fader knobs available
Also where is it possible to buy the fader caps to?Greets, Roger
-
-
Why not use an external MIDI-Thru to split the signal?
http://www.ucapps.de/midibox/midi_thru.gif
- connect the MIDI Out from your host to A3/B3
- connect the output of Y3 to A1/B1 and A2/B2
- so you'll get 3 "amplified" MIDI Outs at Y1, Y2 and Y4
Google for "DIY MIDI Thru"... I once saw some complete DIY shematics
Greets, Roger
-
I don't know what "arm/fader position" mean.
... just guessing: I think these are those Mackie shift-functions, where "arm" means "arm/write automation" and "fader position" means "snapshot to zero-/unity gain-position" of the fader.
Greets, Roger
-
yes but not by slave kids (hopefully).
... don't hope too much. - This is the awful downside of free enterprise. Some decades ago it was Japan now it's China and Korea.
You for shure are right and this situation makes me sick. But what do you want? If you want to be competitive in the marked, you have to buy the ICs and other components there, because your competitor will do it and he will beat the price down.
The only way to do a tiny action against this is (that's what I do), not to buy those "over cheaped" end products like whole HiFi setups for $100, screwdrivers for $1 and, and, and... But the action is tiny, because your neighbor will buy the stuff for a couple of bucks and keeps the business running.
Greets, Roger
-
Wird alles brav durchgearbeitet.
Wenn ihr mir Bücher empfehlen könnt, welche wären das denn?
Ich werd morgen mal nach Essen in eine große Buchhandlung fahren.
... warum nicht OnLine? = Gratis
Wenn Du unbedingt ein Buch haben willst... in der guten alten Brockenstube (so heisst das jedenfalls in der Schweiz... weisst Du, die Gebrauchtwaren-Schuppen von der Heilsarmee), gibt's tonnenweise Elektronik Bücher.
Greets, Roger
-
my intention was to imply that these corporations use cheap labour in china, hence criticising the company rather than the chinese. apologies to all offended.
Where else? ... Might be the reason that you can buy them for a few dollars ;) I think all displays are made in "cheap" china
Greets, Roger
-
'm not the well-advised person you're after, but the motors will still need analogue driving, won't they?
... no - PWM is digital driving
-
Everything for free? ... It seems so, since I can't find any prices.
-
Also, ich möchte mal kurz 3 Dinge sagen;
1. vielleicht solltest Du das mit dem "PIC brennen" in den Titel deines Posts hineinschreiben
2. Ich bin sowieso stark dafür, dass wir hier im "Deutsch"-Forum einen eigenen PIC-Brenn Thread starten.
und
3. Nein, ich kann ihn Dir leider nicht brennen :(
...nur damit dass mal gesagt wurde ;)
matthias
??? ??? :-\
-
Ich weis nicht genau, wie diese Duo Led's aufgebaut sind und will nicht meine Led's zerstören,
Oder ist es egal ?
... das sind einfach 2 Dioden in einem LED-"Gehäuse". Diese LED's, von welchen Du sprichst, haben eine "common Cathode", was heisst, dass die minus pole der beiden Dioden intern (in der LED) zusammen gehängt sind. Du kannst also ganz einfach, wenn Du SmashTV's oder Mike's Bausätze verwendest, die mitgelieferten 220Ohm Widerstände verwenden und je einen Out-pin des DOUT-Boards auf jeweils eine Anode hängen und die eine (gemeinsame) Kathode zurück auf "Vs" des DOUT-Boards.
Greets, Roger
-
and you were also right about the LEDs
mmmm, triangle......
... cool! I was thinking about that too but let it go exactly because of this problem :'(
Greets, Roger
-
i need some triangle shapes - base is 3mm, sides 4.5mm
... I think I know what you want: Is it for triangle shaped LEDs?
The problem is, that you wandt sharp edges but this is not possible, since you always have the diameter of the grinding tool.
Triangle with sharp corners have to be punched or Laser-Cutted.
Greets, Roger
-
Ich habe irgendwie riesige start problemme...
Habe mir alles einfacher vorgestellt.
... wenn Du nicht ein geübter Elektronik Crack bist, musst Du Dich länger mit den Forumseinträgen rumschlagen, dann wird mit der Zeit manches viel klarer.
Wenn Du aber per sofort, ohne die nötige Erfahrung, einen Controller bauen willst,dann baust Du am besten TK's Controller 1:1 nach, bestellst die selben Teile usw.
Wenn Du jetzt einfach Teile drauflos kaufst, kannst Du viel Geld in den Sand setzen.
Grüsse, Roger
-
Hello
Does anybody know about those displays (http://pdf1.alldatasheet.com/datasheet-pdf/view/103297/INFINEON/SLR2016.html) can be driven by MIOS and if yes, how?
Thanks, Roger
-
...not mouser but cheap.
Greets, Roger
-
http://www.ucapps.de/midibox_lc.html
Bezüglich LCDs nötig oder nicht: Suche im Forum... X Artikel zu diesem Thema
-
suche im Forum!!! X Artikel zu diesem Thema
-
... but the slotted wheel that acts as rotation detector.
http://users.adelphia.net/~skbosko/Robot_top.htm
Greets, Roger
-
... an other solution than ripping mices appart:
another Fader technology which could be easy DIYed (mechanical wise):
http://www.djstatus.com/rane3.html
http://www.rane.com/ttm56video/colatest.wmv
Greets, Roger
-
hoffe das kommt verständlich rüber
...Yepp, kommt rüber und zurück ::)
http://www.ucapps.de/mbhp.html
Greets, Roger
PS: Ich denke, das Design und die Funktionen sollten von Dir kommen, dass die dann halt so blinken, die einzelnen takte im beat :-\
-
I think your Joystick uses pots (perhaps even 10k)
http://www.ucapps.de/mbhp_ain.html
connect your pots directly to the AIN. - No need to convert any digital format.
Greets, Roger
-
Wie sind die Panasonic Motorfader im vergleich zur ALPS (außer das die Panasonic MF nicht berührungsempfindlich sind)?
http://www.ucapps.de/mbhp_mf.html
Wäre es technisch machbar aus dem MF wie dem Panasonic, einen berührungsempfindlichen durch einen kleinen Sensor etc. zu realisieren?
... suche im Forum danach, dies war mal ein Thema. Ich glaube aber, dass es niemand realisiert hat.
Wäre es möglich ein Meterbridge zu bauen, welcher mit dem Mixer von Cubase kommuniziert?
http://www.ucapps.de/midibox_lc.html
Greets, Roger
ALPS RSA0K11A1-B103 "K-Fader". Where to get in Germany?
in Parts Questions
Posted
Since you ignored my first post... I'm just trying to avoid you spending money for nothing. ;)
... the only K-Type I can find at Farnell is LOG:
http://de.farnell.com/jsp/endecaSearch/partDetail.jsp?sku=1191704
... it says "Gehäusetyp: linear" which means "linear fader" but the taper is 10k LOG
Greets, Roger