skunks Posted December 26, 2010 Report Share Posted December 26, 2010 There is midibox_sid_v3 code for mios32 at http://svnmios.midibox.org/listing.php?repname=svn.mios32&path=%2Ftrunk%2Fapps%2Fsynthesizers%2Fmidibox_sid_v3%2F Please suggest core32 + SID modules connection schematics. Quote Link to comment Share on other sites More sharing options...
nILS Posted December 26, 2010 Report Share Posted December 26, 2010 The connection is described in \modules\sid\sic.c Quote Link to comment Share on other sites More sharing options...
julienvoirin Posted December 27, 2010 Report Share Posted December 27, 2010 (edited) .h btw, is it for using with Smash tv's SID PCB ? Edited December 27, 2010 by julienvoirin Quote Link to comment Share on other sites More sharing options...
skunks Posted December 30, 2010 Author Report Share Posted December 30, 2010 Thank you. I remember I've seen somewhere at the forum some info about core32 sid (how much SIDs can be connected, etc). But searching for sid mios32 and sid core32 didn't give any results. Quote Link to comment Share on other sites More sharing options...
TK. Posted December 30, 2010 Report Share Posted December 30, 2010 There is currently no advantage if you build this incomplete (!) version - the project is stalled as long as no STM32 derivative with 512k flash and simultaneous access to CAN and USB interface is available. The V3 firmware was only "prove of concept" and some personal C++ practice. It could take another year until it will be continued - or maybe I should just cancel it and focus a new synth? :ahappy: Best Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
julienvoirin Posted December 30, 2010 Report Share Posted December 30, 2010 (edited) focus a new synth? based on CEM3396 if i offer you the chips ? :flowers: Edited December 30, 2010 by julienvoirin Quote Link to comment Share on other sites More sharing options...
jojjelito Posted December 30, 2010 Report Share Posted December 30, 2010 based on CEM3396 if i offer you the chips ? :flowers: +1oneoneeleven!!!!111 As long as the ST32 outputs the correct timer signals to the 3396's waveform converters we are gold. Me on this: Stalled for now :( Back to Xcode. Quote Link to comment Share on other sites More sharing options...
skunks Posted March 24, 2017 Author Report Share Posted March 24, 2017 Update from TK is here Quote Link to comment Share on other sites More sharing options...
ChinMuzik Posted April 9, 2017 Report Share Posted April 9, 2017 On 12/29/2010 at 3:20 PM, jojjelito said: +1oneoneeleven!!!!111 As long as the ST32 outputs the correct timer signals to the 3396's waveform converters we are gold. Me on this: Stalled for now :( Back to Xcode. How bout the 3372 too?? :D Quote Link to comment Share on other sites More sharing options...
jojjelito Posted April 13, 2017 Report Share Posted April 13, 2017 There's nothing magic in the CEM3372. Some other CEM chips also support pole switching. Some, like the CEM3378/79 don't do it as easily. Better leave them for spares for the good old stuff like Chroma Polaris and such. If you want to see pole mixing done with readily available components you could take a look at the 4 Pole Mission Shruthi. The Ambika didn't realize a full version of that due to component count/cost, but it can certainly be done. 1 Quote Link to comment Share on other sites More sharing options...
jaytee Posted April 14, 2017 Report Share Posted April 14, 2017 Old ass thread, everyone. Move along. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.