FLD Posted July 23, 2012 Report Share Posted July 23, 2012 I have everything needed to build mb6582, except the panels for the Pactec PT-10 :[ So if anyone has panels and would be willing to mail them to Finland I would very much like to buy them. Quote Link to comment Share on other sites More sharing options...
jojjelito Posted July 23, 2012 Report Share Posted July 23, 2012 Tip: Check with the member julianf (The Beast co.ltd) otherwise. He'll cut you some very nice panels :thumbsup: Quote Link to comment Share on other sites More sharing options...
FLD Posted July 24, 2012 Author Report Share Posted July 24, 2012 Tip: Check with the member julianf (The Beast co.ltd) otherwise. He'll cut you some very nice panels :thumbsup: He is currently busy with moving. Quote Link to comment Share on other sites More sharing options...
Hawkeye Posted July 24, 2012 Report Share Posted July 24, 2012 If you need them quickly, use schaeffer/frontpanel express - great quality and quite easily customizable with the frontpanel designer tool. Many greets, Peter Quote Link to comment Share on other sites More sharing options...
ilmenator Posted July 24, 2012 Report Share Posted July 24, 2012 Alternatively, you might want to look at a Ponoko case, e.g. Shruthi or SammichSID style. There, the whole case will be about 60 US$ or so, and you can get these fancy honeycomb side panels if you like. :thumbsup: Quote Link to comment Share on other sites More sharing options...
NorthernLightX Posted July 26, 2012 Report Share Posted July 26, 2012 I think I have a spare set, but it was from the first batch and had some blemishes or defects in the silkscreening. Are you planning on customizing it (e.g. with lazertran) or do you need finished and ready to use panels? Quote Link to comment Share on other sites More sharing options...
Arkay Posted July 27, 2012 Report Share Posted July 27, 2012 (edited) Hi FLD, I'm also needing a set of panels for my build. Dunno if there's any cost saving on ordering just 2 sets at once but if you're interested I can go in with you on the purchase. Did julianf give any indication about how long it will be before he can cut new panels? As I still have to order all my components it'll be a while before I need my panels so I could possibly wait. Ponoko could be an option. Does anyone have any pre-done design files for an MB-6582 style case from them? Open to ideas/suggestions too... Cheers, Arkay. Edited July 27, 2012 by Arkay Quote Link to comment Share on other sites More sharing options...
smokestacksproductions Posted August 10, 2012 Report Share Posted August 10, 2012 you can open wilba's layout in frontpanel designer (available free on the fpe website) and export it as a .svg file. You can then paste the contents of the .svg onto the ponoko templates available on their website. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.