Jump to content

SEQV4 - Alternative Analogue Outs...


cosmosuave

Recommended Posts

I have just started my build of the SEQV4 with analogue out (gate/cv) via DB25 connector... Has anyone opted out of the DB25 connector and substituted it for 1/8" jacks? I want to do this as I do not want to have to construct another interface to run my analogue gear or if you are using the DB25 how are you interfacing with your gear?

 

Thanks...

 

Brian

Link to comment
Share on other sites

Attached a photo of my sequencer. Still not exactly sure how I am going to attach the jacks. I know the trigger outs need a 3.3v - 5v level shifter to trigger eurorack and most modulars. Can't remember if the gates need that too.There is some info on that here: http://ucapps.de/midibox_seq_manual_hw.html

 

Shawn is a good friend of mine. He actually gave me that casio midi splitter you can see in the pic. Shawn and I have played together a bunch. Here is a tune we did together. http://goo.gl/OJTBY1

 

Luke

post-3832-0-14026000-1386806875_thumb.jp

  • Like 1
Link to comment
Share on other sites

Attached a photo of my sequencer. Still not exactly sure how I am going to attach the jacks. I know the trigger outs need a 3.3v - 5v level shifter to trigger eurorack and most modulars. Can't remember if the gates need that too.There is some info on that here: http://ucapps.de/midibox_seq_manual_hw.html

 

Shawn is a good friend of mine. He actually gave me that casio midi splitter you can see in the pic. Shawn and I have played together a bunch. Here is a tune we did together. http://goo.gl/OJTBY1

 

Luke

Cool his vid at Tresor is great and i can't believe he is using an MMT-8 for sequencing... Will be on the look out for him if he play's Toronto... Your SEQV4 looks nice and i like how you put the jacks on the faceplate... I may do that or go from the rear nmot sure yet as it will be racked... Like the tune you guys did...

Cool... Good to see people have gone the route with jacks... Since my Doepfer stuff is 1/8" I will go with that...

Link to comment
Share on other sites

Possibly relevant for you: I have in mind an idea to create a Eurorack version of AOUT_NG

 

The connection from the SEQ would be buffered/level shifted gates, ()

 

DIN sync and clock, and a buffered J19 line through a DB-25 cable. The Eurorack module would receive power from the +12/-12 V supply, powering a re-routed AOUT board. CVs would be passed to another board stacked on top containing 3.5 mm jacks.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...