DavidBanner Posted December 21, 2006 Report Posted December 21, 2006 Can anyone please recommend a good CNC place to get a front-panel done in Europe (UK prefered).I don't think Shaeffer/Front Panel Express will do, as I have at least 1 type of hole to be cut they don't have in their software,. Quote
pay_c Posted December 21, 2006 Report Posted December 21, 2006 :oWhat´s that hole? How does it look like?Perhaps you can simulate that hole by putting together different geometries? Quote
DavidBanner Posted December 22, 2006 Author Report Posted December 22, 2006 i need some triangle shapes - base is 3mm, sides 4.5mm Quote
Screaming_Rabbit Posted December 22, 2006 Report Posted December 22, 2006 i need some triangle shapes - base is 3mm, sides 4.5mm... I think I know what you want: Is it for triangle shaped LEDs?The problem is, that you wandt sharp edges but this is not possible, since you always have the diameter of the grinding tool.Triangle with sharp corners have to be punched or Laser-Cutted.Greets, Roger Quote
DavidBanner Posted December 22, 2006 Author Report Posted December 22, 2006 Cheers Roger,I think you are right, have found somewhere who will do it for me, very cheap too, they were talking about punches. Quote
DavidBanner Posted December 22, 2006 Author Report Posted December 22, 2006 and you were also right about the LEDsmmmm, triangle...... Quote
Screaming_Rabbit Posted December 22, 2006 Report Posted December 22, 2006 and you were also right about the LEDsmmmm, triangle......... cool! I was thinking about that too but let it go exactly because of this problem :'(Greets, Roger Quote
smashtv Posted December 22, 2006 Report Posted December 22, 2006 Punch press.....http://en.wikipedia.org/wiki/Punch_pressThe CNC ones are very loud and scary, but the result is comparable with laser cut.I'm still looking for a DIY water saw project.... ;) Quote
DavidBanner Posted December 23, 2006 Author Report Posted December 23, 2006 we like loud and scarey if it means top quality, even more so when someone else is operating it!I'm still looking for a DIY water saw project.... a DIY water saw sounds cool, as long as the safety angle is covered, the danger and mess you could get with problems and troubleshooting could be quite hairy.... Quote
DrBunsen Posted January 4, 2007 Report Posted January 4, 2007 There was a DIY CNC laser project mentioned on hackaday or makezine recently. Pretty impressive, guy built his own CO2 laser.Another option for getting stuff made up is emachineshop.com, but they're in the US. Quote
henrygr Posted January 4, 2007 Report Posted January 4, 2007 FYIhttp://www.hackaday.com/2005/03/27/cut-sheet-metal-with-your-homemade-laser/ Quote
henrygr Posted January 4, 2007 Report Posted January 4, 2007 Oh yeah,I'm a chef by trade, so here is a trade secret. Second hand or defunct and broken kitchen equipment is lying around nearly every hotel in the world. It is thrown out only when the political will od the head chef motivates him to hire a skip or contact a recycling firm- and they cost big money. Not nice having a chunk of your bonus package going into throwing things out, is it?So most will jump at the chance of having someone take it out of their way for free.And yes, it's all made of high grade stainless steel!!!Keep cookin'Mark. Quote
DrBunsen Posted January 4, 2007 Report Posted January 4, 2007 Yeah I just scored a dead microwave that way, with a nice shiny stainless steel case ;DMust have been a different project where the guy built his own laser tube as well. Pretty sure it was on one of those two sites. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.