Jump to content

MaG2k

Members
  • Posts

    111
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by MaG2k

  1. i got the case to...yesterday in the morning. looking realy great and robust. well done! thx latigit on so i only have to order at mouser and at Formulor. T.K. can you tell me which PIC18F4620 i specialy need for the mini-Core...at mouser i can by the PIC18F4620 I/P and a PIC18F4620 E/P? I think and i hope that i can burn the bootloader for my self with my "Sprut"-PIC-Burner. Regards MaG2k
  2. got it!!! thanks! but the shiftbutton is missing! Regards MaG2k
  3. yeah...damn good stuff! cat await it. You know i told you that my postal adress is different from the paypal-adress...i told you once before new adress is the one in "Hahnheim" if you not shure tell me please via email or PM and i give you the corect complete adress once again! Best Regards MaG2k
  4. something new about the order of PCBs and cases? When can i calculate with them? Best regards? MaG2k
  5. i contacted wilba in 2013 for setting me on the waiting list...i hope that i am still on that list or that this list is still existing and still active! if not, please set me on the waitinglist again for complete bundle with acrylic case (if possible) and chips too! Thanx Regards MaG2k
  6. Hey Latigid on, sorry that i didn't set me too the list till now. To many things happend in the meantime. The mean reason was vacation...so now i am back and got your PM. I have a little bottleneck on my bankaccount at the moment but i hope i can manage it. So i set me down onto the waitinglist. Please let me know how its going on with the ordering/payment/delivery-process. I see a little problem with that project. As you started the thread i looked to www.flikto.de because of the silicon button matrix and at the startingpoint they had enough for one order...but at the moment they dont have this buttons in stock. So at the moment it is a kind of russian roulett...if they dont get them again anymore...i have a PCB and a case for buttons that dont can be ordered anymore. I think that many people here wanna order from flikto and the fact that they dont get new in stock for the last weeks makes me a little bit scary. But okay i am on the waitinglist and if you order i am in! Best regaerds MaG2k
  7. hihi...yes you should show them what you are doing....much better then Push cause directly control hardware no need of a computer at all! ;-) + BLM has much more keys! ;-)
  8. thanx for your fast reply...can you tell how much the case will cost? Thanx MaG2k
  9. hi latigid on, and the case you build...is it a full metall case or only the frontpanel? or do you plan an acrylic case? I designed an 5mm acrylic case for my SEQ V4 so that it would be a good alternative to full metall but acrylic is not that durable in case off crashing to the ground as metal. so please give a little more details about your case! But by the Way...i am in! ;-) Best regards MaG2k
  10. okay what do you think PCB+Case+Siliconkeys will cost tougether?
  11. hey latigid on....realy great job. Its looking realy nice. Are you making a list of all parts needed in best case with articlenumber from mouser? were i can get the PCB and the Case? Can you make a kind of small Bulk for Case and PCB??? Regards MaG2k
  12. Hi latigid on... do you plan to create a kind of batchorder or do you make the PCBs and the rest has everyone to collect for themself? If it would be a batch with all needed parts a would be very interessted in too. The last days I read an article about a new PC-keyboard from Cherry for gamers with fullcolor illuminated keys. It would be nice if there would be any way to get on those keys because no silicon pad with these conductive coating but a real mechanical key designed to stand for millions of keypresses. Does anyone of have good contacts to Cherry or there manifacturers? ;-) Best Regards MaG2k
  13. its a long time ago...around last year i talked with wilba...and he told me that the sammichFM isnt dead...but he will make a new batch if he have time again. he didnt told me why he dont have time but think about yourselfs...what can happen so that you haven't the time you had before...in my special case it was the birth of my daughter and a house...thats why i havent so much time at the moment for midibox projects...but i am very confident about the sammichFM and when wilba says he will make a new batch...then he will do when the time is come. i am hoping too to get one. my OPL3 IC laying waiting around too. :-) Regards MaG2k
  14. very very nice fairlightiii
  15. hi Shuriken, thanx...if i find the time to post into the wiki i will do...! :-) Best Regards MaG2k
  16. Hello T.K. thanx for your praise...but a little discribtion on how i mounted the panel. :-) but befor that how is the case holding together...the first i have to say...its not that good and strong fitting like we know from wilba's sammichSID or sammichFM...i didnt have the money to make many tries till it is so good fittig that the parts holding together by themself. So i had a little help from a special acrylic glue named "acrifix 192". Its a glue which hardens under UV light and getting very very strong! I glued the sidepanels to the groundpanel so that the top-aluminum-panel fits correcly on the top and the frontpanel-PCB is fitting into the case. The mounting of the Front-Panel is very easy. I used on 6 (10mm) bolts that holds the frontpanel-PCB to the aluminum fronpanel some longer bolts (i have to look how long but i guess it was around 35mm) that reaches down to the bottom of the cases bottompanel...then it is easy...so the frontpanel is srewed to the bottom-panel with the help of long bolts in the inside...but i think i will make a video of it..its easier to understand. For a wiki i must see how i have time but i think i can do it if you give me time for that. I have to count the parts i needed (srews, bolts...and the lengths of it) and then i can try to post it into a wiki! :-) Best regards MaG2k
  17. hi kristal= nearly the same rubberfeets i use for those acrylic cases! But much easyer to get here in germany! Try out this one from "Pollin.de" : http://www.pollin.de/shop/dt/MjkxODU1OTk-/Fundgrube/Haushalt/Gummi_Geraetefuesse_3_Groessen_46_teilig.html http://www.pollin.de/shop/dt/NjE3ODU1OTk-/Fundgrube/Haushalt/Gummi_Geraetefuesse.html http://www.pollin.de/shop/dt/NTE3ODU1OTk-/Fundgrube/Haushalt/Gummi_Geraetefuesse.html I had nearly the same problems like you because of the "Heidenreich-Case". I allready contacted Heidenreich but for only one case it is to much they want to have and i dont like to order more than i realy need...and on the top it is a little difficult to get all the components into the case and plane to the backpanel because of the design of that "Heidenreich"-case. Thatswhy i started to create my own one in acrylic but i realized that 5mm is much more rugged then in 3mm. I allready made acrylic cases for the GM5x5x5 PCB aswell as for fairlightiii's LRE8x2 encodermatrix PCB. The LRE8x2 case i made in 3mm and because of its size the 3mm material is a little less rugged...never let it fall down to the ground...it will definitely crack. I think that will happen to the 5mm version too but not that fast as on the 3mm and the 5mm case hapticly feels much better! :-) regards MaG2k
  18. Hi midiboxerbuilders, -modders and -programmers, here i want to show you my version of a case for the SEQ V4. Because i didn't like the complete acrylic cases and because i allready had build the SEQ V4 Wilba controlpanel and allready had ordered the aluminum panel at Schäffer AG (Germany) i decided to create a very rugged acrylic case (only the side and buttom parts). So as you can see in my uploaded pictures it looks realy nice and didn't cost to much...okay 5mm acrylic base material is more expensiv the 3mm but its also more solid. (costs for the 5mm acrylic parts: ~ 80€ +freight charge at "Formulor.de") The back- and frontside engravings i filled up with paint myself by using a brush and paint it in coarse (dont let it stay/dry to long) and then using a good absorbing tissue to wipe the color out and to clean the color that is to much (on the non engraved area). you don't need any ethyl alcohol for it...dont use it becaus ethyl alcohol tends to micro fractures on lasercutted acrylic. Its enough to clean the paint with the tissue as long the color is liquid. As engraving-filling paint i used the "revell enemal" paints. They working great! And here you can see the complete SEQ-V4 in its new housing! :-) Okay i did the work months ago but now i had the time to post it to you! Pay attention: the holes in the basepanel arn't in the lasercut-artwork because i didn't had the correct measurements of all the PCBs i used. But its the better way to drill the holes you need for your PCBs yourself. I used a custom made SD-card-reader-PCB and the Quad-Midi-I²C PCB from SmashTV so therefore i had to drill the holes myself...but as i said before...its no problem if you be carefull and don't push to much when you drill! (If someone is interested in the in the artwork of my acrylic case (only the acrylic parts) post me a message and will send you the svg-file that you can modify it yourself in "inkscape" (its freeware) to your needs) regards MaG2k
  19. MaG2k

    Another SEQ-V4 Acrylic Case

    Pictures of my SEQ V4 version made with the standard Wilba Frontpanel milled by "Schäffer AG" (Germany) and a custom made 5mm acrylic case lasercutted by "Formulor" (Germany)
  20. MaG2k

    20130901 111116

    From the album: Another SEQ-V4 Acrylic Case

    complete SEQ V4 in the new 5mm black acrylic case with standard wilba-aluminum-frontpanel

    © picture by MaG2k

  21. MaG2k

    20130901 111037

    From the album: Another SEQ-V4 Acrylic Case

    complete SEQ V4 in the new 5mm black acrylic case with standard wilba-aluminum-frontpanel

    © picture by MaG2k

  22. MaG2k

    20130901 111002

    From the album: Another SEQ-V4 Acrylic Case

    complete SEQ V4 in the new 5mm black acrylic case with standard wilba-aluminum-frontpanel

    © picture by MaG2k

  23. MaG2k

    20130901 110949

    From the album: Another SEQ-V4 Acrylic Case

    complete SEQ V4 in the new 5mm black acrylic case with standard wilba-aluminum-frontpanel

    © picture by MaG2k

  24. MaG2k

    20130830 123142

    From the album: Another SEQ-V4 Acrylic Case

    a view from the back-top

    © picture by MaG2k

×
×
  • Create New...