cimo

paul thanks for saving me from writing this post i am stuck at the same point! :) simone

referring to this thread http://www.midibox.org/forum/index.php/topic,10499.0.html it seems that http://www.ucapps.de/midibox_lc/midibox_lc_leds.pdf is not consistent with the default lc_table_io.inc and therefore wrong (or am i missing something?) simone

hola :-[ acabas teniendo razon! efectivamente http://www.ucapps.de/midibox_lc/midibox_lc_leds.pdf parece ser incorecto de toda forma lo mas corecto y seguro es confiar en el mapeo que esta en lc_table_io.inc, alli no puede fallar gracias para signalar el fallo en la documentacion los led digits son common anode o common cathode? simone

nop no debounce !

:o ;D ;D ;D it just works ! it works perfectly, i haven t noticed any "lost hit" or "double hit" uh oh :-X

you see the camera s come

.. this one:

has recompilado la aplicacion? por supuesto las maquinas no fallan, los hombres que las programan si ;) en table_io puedes definir las varias funciones de MC, y eligir en que pins de los DINs y DOUTs aquellas funciones estan ante de todo comproba que pins estan utilizados por los encoders y por los led digits etc en main.asm, aquellos no los podras utilizar en las tablas de table_io (si no me esplico bien dimelo, no soy de habla hispana y a veces me lio con el rollo tecnico) simone

hola guille bienvenido para que te podamos ayudar necesitamos mas informacion, nos ha dado mucho detalles pero no lo basico: has cambiado el codigo de LC en alguna parte? has cambiado la orden de las conexiones de los modulos DIN DOUT en alguna parte ? de lo que me comentas me parece que has asignado algunos pins de DOUTs a 2 o mas funciones al mismo tiempo o algo por el estilo simone EDIT: pon aqui tu main.asm y el table_io si los ha cambiado

..fair.. and appropriate Twin-X ?

yep let s keep this thread open so we can track the bugs and help TwinX i also noticed that i have to log in everytime i visit the page although i have the "forever" tab on.That would explain why we don t always get the unread posts simone EDIT: i see dj3nk but these infos could help our web masta EDIT:ok stryd etc etc let see if you let me post now :)

hallo it sounds easy but i need help: 4 buttons with leds 1 pot (pedal) MB64 a)do the usual tweaking on main.asm b)in mb64_meta.inc change meta event 00 MB64_META_Handler_00 ;; set global channel to the second byte of a F0 xx meta event movff MB64_GLOBAL_CHANNEL, MIDI_EVNT1 return tx TK c) change mb64_presets.inc MB64_Presets_OffsetButtons ;; DIN/DOUT group 0 BUTTON_ENTRY 0xf0, 0x01, 0x7f, 0x00 BUTTON_ENTRY 0xf0, 0x02, 0x7f, 0x00 BUTTON_ENTRY 0xf0, 0x03, 0x7f, 0x00 BUTTON_ENTRY 0xf0, 0x04, 0x7f, 0x00 BUTTON_ENTRY 0x94, 0x30, 0x7f, 0x00 BUTTON_ENTRY 0x95, 0x30, 0x7f, 0x00 BUTTON_ENTRY 0x96, 0x30, 0x7f, 0x00 BUTTON_ENTRY 0x97, 0x30, 0x7f, 0x00 >>in main.asm i set pots number to 1 and buttons to 4 >>i just need to change the cc/channel sent by the pot with the 4 buttons so also a "group" switch would be ok, but groups are only on MB64E not in MB64 -am i right? i need MB64 for the soft take over, it s a pedal for guitar considering a possible development, is it possible to assign the midi channel via meta event to 2 buttons (next/previous) and assign eg 8 leds to monitor in which global channel the box is? thanks simone

i hope to demonstrate that you are wrong, soon. ::) and i ve never thought to do the PCB cutting, it s just a damn good idea.

hi i don t (and can t) use sparkfun s pcbs cause i have a 2x8 and 2x5 (you should know that ;) matrices so i etch the damn thing by myself.

.. just to let you know.. i spin real records (well my pal does) and do real time sampling.. ie: i spend hours tapping on the tap button, alternately i use a foot controller so i can tap on there

about a) i don t usually need to pretend anything about b) you gotta see my new house! i can light up things just stepping barefoot

... and that brings you right here: http://openeeg.sourceforge.net./

i told the board it was going to be thrown in a bucket filled with 30vol peroxide and muriatic acid

hey J (and whoever) i ve miserably failed my first PCB for the sparkfun buttons, i have to say i didn t tried it out yet but it looks like a piece of ship (a wrecked one) or like a piece of sheep (a dead one), terrible vias, shortcut pads, badly cut dimensions, a disaster.If that s going to work anyway .. i ll call it a miracle and make myself priest i need to redraw the layout on eagle, move the vias which are on the pads out of there so they won t interfere with the buttons pressure zone. I tried the cool amp thingy (tx smash and jimp) it goes without effort on an unetched board. i ll give it another go, if it doesn t work this way i ll have to ask mr olimex to do the dirty job for me, with a real unpleasant feeling of failure by my side, that s life. updates soon

it s all ok now IT WAS a hardware problem i had used a wrong resistor! thanks for the support and sorry for bothering! simone

yep i know that that s the upoload request, there is just a strange behavior, now for example it will send it just twice, then nothing.I ve managed to start a MIOS upload bu t then it gets stuck here: Sending block 00000B00-00000BFF which is block # 8 hardware seems to be ok and i ve just uploaded MIOS in another core ?? thanks simone

what does an endless repetition of the F0 00 00 7E 40 00 01 F7 string every 20 ms mean? tx simone

for many other reasons as well :P

ok i got the heat sinks the zip ties and thermal compound, it just works great!!i will show a pic whenever a cam will visit my house simone

Any progress on this project? Seems very interesting to me! ;D