Antix
-
Posts
824 -
Joined
-
Last visited
-
Days Won
3
Content Type
Profiles
Forums
Blogs
Gallery
Posts posted by Antix
-
-
Thanks to TK
Thanks to Wilba
Thanks to SmashTV
and
Thanks to Hawkeye
A new MB6582 is on this planet
It is not yet fully stuffed (I discovered that one of my four 8580R5 was dead )
But I start to play it the same :D and I am really amazed from it .
Greets from Italia
Antix
-
Hi,
I am using heatsinks on the SIDs too.
I noticed that they get really hot so bought some 28DIP format heatsinks and a thermal conductive biadhesive tape ( I found AKASA but I think there are others too )
I made some drills in the bottom of the case and used a fan taking supply from J4 GND - 9V W/O any resistor
Regards
Antix
-
Uhm....
I dont believe there is tea in that glass :whistle:
Lucky man...she has got a charming voice.
Greets from South Italy
Antix
-
Hi Thorsten,
Are there some red PCBs or only white?
Best regards
Antix
-
Check the soldering of the pin 21 on GM5 chip too
-
Hallo
Ihr Fehler ist keine montage. Das gleiche passiert mit mir .... es scheint normal, dass die Tür 5 die LED weniger hell.
Es tut mir leid für schlechte Übersetzungen
Gruß
Antix
-
Hi,
As I already saied I am interested :thumbsup:
So... I am in WAIT mode
Regards
Antix
-
Just received :thumbsup:
Thank you Thorsten
Antix
-
also a quick note, the core regulator does burn off a lot of heat, will this be bad to leave in its current config or will I really want to make sure its 12v for core and 15v for SID.
-Hoist1138
Use for the core regulator 7805 a heat sink for ensure him a long life :smile:
Regards
Antix
-
Well done :thumbsup:
Antix
-
I really like Black-Green-White MB6582 :)
Well done
Antix
-
Hey man !
Happy birthday
And dont be sad for your GETTING OLD :poke:
Hope you like the cake
Greets
Antix
-
Now the distance from "the working dance" is very little :yes:
-
Yes...
A picture of testing setup can be helpful...
Are you powering the 12 volt rail of SID module ?
I see no cable on 12 Volt power in of the SID module in all the pictures you posted.
let me know
Antix
-
Using equipment works well against dust, too ;)
Yes...
just wash your hands first ;)
-
1
-
-
Crap!!!
I already bought 8535......
them will not work anyway?
Antix
-
Hi,
It seems to me too a defective LCD.
I never seen missing dots like this in the second row.
Need another LCD for testing.
Regards
Antix
-
Are them the same in the Tips And Tricks section ? ( MB6582 control surface photo tutorial )
-
Hi
I used ELNA and NICHICON for supply
Saluti
A
-
Hi Flemming,
you dont know the international name of that material but the picture you have posted can be recognized on Mars too :thumbsup:
Here is TELA INCERATA or TELA IMPERMEABILE.
Greets from Italy
Antonio
-
Hi,
Try Cadsoft EAGLE, you can download the light version for free.
Regards
Antix
-
Yes... I think the IC2 is gone :bye:
Try with a new IC and probably , if there are no errors , your SID will sound :thumbsup:
Regards
Antix
-
Hi,
Are there any unsold knobs yet?
I need white or green
Thanks and regards
Antix
-
logically if you power the IC2 otherwise for too long it will be fired up...so probably you will have to change it
New MB6582 is born
in MIDIbox SID
Posted
hi Jojjelito,
Yes...I saw some Gattobus videos time ago...but I built my blue led lamp before :smile:
it is my preferred listening or playing music.
and now is the preferred light tweaking MB6582 knobs
greets
Antix