technobreath

I have now made a picture of the second revision of the vcf board available at the gallery. This has some minor layout changes and also a "cleaned up" silkscreen. I'm having serious trouble fitting it all in there, so if anyone would like to have a go at it, I'll send em the eagle files ;).

I'm super interested in these. Will definitely take 4 boards when you've got them. Can pre-pay if it helps w/ development costs, etc. Will stuff proto boards and test, too, if you want.

Thanks!

Any new news on the filter boards? My ssm's are taunting me :)

Reading the manual s cheating! :)

5: rtfm

hehe bf.

Hehe, this kind of snow is extremely rare in my area - I live by the coast of south-west, and here we're lucky to get 15cm or so, and even luckier if it doesn't rain away the same afternoon. So this is extraordinary. The former snow record for this area was set in 1961. And yesterday that record was broken in a massive way. Now I wait for the blizzard to wear off, and the rain to start sometime later tomorrow! :)

Don't hog all the snow Norway! Sweden needs moar for an even fluffier X-mas :D

I'll gladly ship some to your front yard! My whole property is full of white shit! And I'm sure it will all rain into some dirty slurry by the end of the weekend, and the piles will not rain / melt away for months. I told missus, when the blizzard / snow fall is over I'm getting a big tractor down here and transport away all of the shit. Don't need a swamp in my garden the next 6 months! So - yeah - u can have some! A lot! :D

Thanks! I am also interested in the final result :) Hope it continues to look good ;)

Looks really nice this!

thanks swede ;)

LOL

Hehe

Yarr!

kanThs (:

:] dreeAg, deaH seelF reBtte, aoN!

★☆★ apphy wen yera ot oyu sugy, oot! ★☆★

Hehe. Yeah, i know - jet engine is the right word - and u can heat a cold cup of coffie if u put it next to the hot-air-vent. My laptop is a new dell i7 - was about the most powerfull I could get from Dell when I got it some months ago. But Inventor is the first thing I have seen that makes it go all hot like that hehe. I was trying to learn Inventor as I have background in Solid Edge - a slightly different workflow, but very nice. I also drawing up some gm5 cases hehe - but I can't submi...

submit stuff to my "own" competition hehe, so I guess it was just for the sake of learning the software. More drawing tonight for sure!

i working on catia V5 (it also my all day job...) but also worked on Spaceclaim (Just the most creative software for industry and really light software) and doing rendering on keyshot (the easy way ! ) I will try to do some render tonight ! Bye

Uhm ... they have interesting pots and knobs for my 9090 and very affordable. ;)

Electrokit.se, but that's domestic for me :)

Cool.

Hmm. I had forgotten about that... It's some months ago now though. People, let me know if there's interest, and apprx. how many you could be in for.

sry, me iz out again, for the fs1r controller later on i need very slim knobs, thinking reichelt 10mm ones.

Cool. I have learnt that a bulk order takes time to mature in midibox community hehe. So that's why I took the initiative - I am not in hurry - have knobs enough for a few projects :)

Installing anything fun or just some glass/IR sensors?

not anything complicated for his first times ;)

yeah, but there are so many better ones :).

Didrik de Geer, Pearl, Tundra, Milab, Ehrlund, Line Audio. Go Scandinavia!!!

heck yeah! :D

sounds cool, but unfortunatly, newhaven hasn't got my choice of color. Need it to fit with blue/black, and either yellow or green combine well with those... :). If there only were white character displays to get somewhere... Else I'll end up with a 20x4 lcd... I'll give myself a little bit more time now to find a suitable oled, but if not, I'll get a lcd off ebay.

Reichelt have some white OLED(s)! Search 'em :) But alas, no 20x4 in white from Electronic Assembly yet.

Tried searching for em at reichelt, 2x16 only for white ones it seems. too bad. But if no, I will buy a 2x16 LCD with white characters on black. And when I can get white ones - I'm sure they are comming, and if they are compatible - I'll just swap em. The enclosure module for the buttons and LCD is going to be one part seperated from the rest of the enclosure, so worst case, I will just have to make a new enclosure for the LCD if it doesn't fit... But of COURSE - Keep hitting me w...

Now when that's settled, count me in. No fund raising from my side though, after all, we're in it for the free stuff :P

The campaign is about leading by example, not fundraising :P

Hehe.

yummy :)

If I hadn't had a curry/chicken sandwich as dinner already I'd be all up on that now! :)

:) hehe. A nice bbq dinner topped with a visit from an old friend of mine in the evening, missus had to drive him home hehe :D Drinking on wednesday evening TB. Shame on you! But it was good :D

Hehe. I soldered most of the mb6582 in the livingroom. So I know the answer to that - there's a reason why all my electronics gear and studio gear ended up 2nd floor :P. So I guess it's with her as with most women - they "want both" :D

Yeah, that is a known problem - you have an inspiration moment, you can be sure the lady calls for attention - she won´t call when you have no ideas :)

inspiration moment?

My wife needs my help exactly at that time

I've done that a couple times :D Make sure you check'em before you etch'em!

good times! I remember a certain game @ my c64 which easily left a broken joystick behind :D

winter games on the atari 800xl, as a kid and not understanding electronics, i built a mechanical joystick wiggler out of lego - only the joystick left/right microswitches were triggered and it went pretty fast :)

I remember having 5-6 broken joysticks for my C64 (always 2 working, though :) )

...gonna be nice to get some knowledge on that too. I just wish I could plug the probe in the back of my head and learn Jijitsu, but I guess that's not how things work hehe. Also working on some dmx->pwm(led and halogen) stuff. Interesting.

for me only a couple of 2SC1583 :)

I'm impressed by ebay sellers - emails about "item dispatched" during christmas. It's almost as I wish they took a couple of days off - almost :P

Im thinking about having a 19" panel made.. just have the controls over to one side.. the dead space behind the other part of the panel would be where the aouts and filters get mounted. I'm wanting everything to fit in a rack so I can transport it w/out too much effort...

I have also thought of doing a rackmount, but I scrapped it as it won't fit my gig needs very good - I need the controls in front of me together with the master keyboard, and that doesn't work too good with a rackmount. But I might consider doing a rack mount for the FM when I build that.

Yay! Julian F makes kick-ass high quality panels :) Have fun!