taximan Posted November 23, 2012 Report Share Posted November 23, 2012 Hiya, hope I'm not too late,I've added another 4 boards and sil networks to match (my original numbers (sils)were wrong). cheers Paul Quote Link to comment Share on other sites More sharing options...
Fairlightiii Posted November 23, 2012 Author Report Share Posted November 23, 2012 Hiya, hope I'm not too late,I've added another 4 boards and sil networks to match (my original numbers (sils)were wrong). cheers Paul Not too late Paul, there is still sometime left. Regards. Jerome. Quote Link to comment Share on other sites More sharing options...
Fairlightiii Posted November 23, 2012 Author Report Share Posted November 23, 2012 (edited) On the http://www.taydaelectronics.com shop (...very good shop) you can buy: 2 ULN2803 Transistors Darlington arrays 4 74HC165 4 74HC595 10 Ceramic Cap 100nF=0,1uF “104†1 Polarized Electrolytic Capacitor 100 uF 1 2x40 Pin 2.54 mm Double Row Pin Header Strip 1 40 Pin 2.54 mm Single Row Pin Header Strip 10 Socket 16 pins 2 Socket 18 pins 256 LED 3mm Red For $10.89 or 8.40€ including shipping to US or Europe. You have only to add encoders and RNs. Regards. Also Tayda has coupons, one should be coming soon, follow them on Facebook. 15% Discount Coupon Code : 877888 Valid till 26 November 2012 ( 12pm New York time ). Regards, Jerome. Edited November 23, 2012 by Fairlightiii Quote Link to comment Share on other sites More sharing options...
Fairlightiii Posted November 24, 2012 Author Report Share Posted November 24, 2012 (edited) Hi members. The list is officialy closed but you can put your name in the list until monday november 26th 8:00 AM (forum time) if you send me by email (jeromebo at free dot fr) in the same time your personal informations: UsernamePaypal mail addressReal namePostal addressCountryLevel of shipping insurance you want to take. Best regards, Jerome. Edited November 24, 2012 by Fairlightiii Quote Link to comment Share on other sites More sharing options...
Fairlightiii Posted November 24, 2012 Author Report Share Posted November 24, 2012 Member "johnniebee", please can you send me a valid email address? Thank you. Jerome. Quote Link to comment Share on other sites More sharing options...
Fairlightiii Posted November 24, 2012 Author Report Share Posted November 24, 2012 (edited) All the Paypal invoices have been sent except 2 (personal informations not still arrived in my email box). [Edit: 1] You have until November 30th to pay. For latecomers, I will send invoice as soon as I receive your informations. Best regards, Jerome. Edited November 26, 2012 by Fairlightiii Quote Link to comment Share on other sites More sharing options...
Fairlightiii Posted November 26, 2012 Author Report Share Posted November 26, 2012 The list of this bulk order is closed but I have bought some extra PCBs for latecomers so if you want ones, email me (jeromebo at free dot fr) the quantity you would like and your personal informations: Midibox username Paypal mail address Real name Postal address Country Level of shipping insurance you want to take.Regards, Jerome. Quote Link to comment Share on other sites More sharing options...
Fairlightiii Posted November 26, 2012 Author Report Share Posted November 26, 2012 We have 181 PCBs ordered (if all members pay their Paypal invoice)... not very far of 189 (189 PCBs at 8.5€ = 200 PCBs at 8€). Regards, Jerome. Quote Link to comment Share on other sites More sharing options...
MaG2k Posted November 27, 2012 Report Share Posted November 27, 2012 (edited) hi fairlightiii... little story about tayda electronics and german customs. I ordered on friday evening a lot of parts (in sum around 3500 parts), many resistors, LEDs, IC...for a realy good price. It was around 90$...with the discount coupon code it was arround 77$. Because i saved a lot of money with that discount code i ordered it via DHL express delivery...it made an extra of 35$. so the grand value was around 111$. the delivery tayda and DHL made in lightspeed. ordered on friday at 10pm (GMT) delivered at 5pm (GMT) on monday and the delivery was all the time trackable. Great job...but!!!....then came german customs and calculated a tax and fees about 33€ that are around 47$...and is more 50% on the merchandise value (90$-14$=76$ and around 62% on the by discount code reduced merchandise value). but overall i can say it is allready much cheaper to order at tayda electronics than here in germany at reichelt. not for all parts but for those tayda has. Packaging was okay, no visible damages. Had no time to test the parts till now but if you can see in many unboxing videos at youtube about tayda there is all okay. :-) For all german forum users in here: Ihr könnt bei Tayda bestellen, aber bestellt recht viel, damit sich das am Ende auch lohnt. Bei mir lag der tatsächliche Preis durch den Zollaufschlag (bei 3500 Einzelteilen) pro Teil 1ct höher. Beispiel 3mm LED: im Shop bei Tayda 0,02$ (entspricht etwa 0,0154€ +0,01€ = 0,025€). Günstigste 3mm LED bei Reichelt kosten 0,06€ pro LED also 0,035€ gespart...macht bei 1000 Stück (trotz hoher Zollgebühr) schon 35€ aus :-) (Ich denke mir der Zoll hat da nur Mist gebaut und einfach den Gesamtbetrag auf der Rechnung (inklusive Versandkosten) von 111$ als 111€ angesehen und darauf mal eben 30% Steuern und Gebühren berechnet! Trotzdem ist Tayda ein guter Tip wie ich finde! but all in all tayda is a good hint for those of you who will order a lot of parts like resistors, LED, sockets or ICs! don't forget to search for discount codes...that saves on top a lot of money! :-) regards MaG2k Edited November 27, 2012 by MaG2k Quote Link to comment Share on other sites More sharing options...
Fairlightiii Posted November 27, 2012 Author Report Share Posted November 27, 2012 Hi MaG2k. ....then came german costums and calculated a tax and fees about 33€ that are around 47$...and is more 50% on the merchandise value (90$-14$=76$ and around 62% on the by discount code reduced merchandise value). Custums calculate their fee on the merchandise value AND the shipping cost. Regards, Jerome. Quote Link to comment Share on other sites More sharing options...
MaG2k Posted November 27, 2012 Report Share Posted November 27, 2012 (edited) hi jérôme, that would be okay...but its allready nearly 50% on the grand value...and thats a little hard...when i order from smashTV its always around 20-25%. you wrote that we are arround 181 PCBs to order...so if there are only 19 PCBs left to 200 you should fill them up...i think there will be some users out there who wants to have one or to more PCBs later or there will be some latecomers. :-) Regards MaG2k Edited November 27, 2012 by MaG2k Quote Link to comment Share on other sites More sharing options...
Hawkeye Posted November 27, 2012 Report Share Posted November 27, 2012 (edited) Hi, I fear, it is quite common, that some people won´t respond or pay in a bulk order, so I guess we are safely above the 150 pcs limit, which is already great ;-). It will be lotsa work shipping out all these parcels. Thanks again for your work and many greets! Peter Edited November 27, 2012 by Hawkeye Quote Link to comment Share on other sites More sharing options...
MaG2k Posted November 27, 2012 Report Share Posted November 27, 2012 Hi Hawkey, from that point of view you are right! its save to buy that many because to buy more without any interessted person at the moment its only more cost for fairlight. And as Peter said....thanx for the work! it will be hard work to handle all the parcels! Regards MaG2k Quote Link to comment Share on other sites More sharing options...
Fairlightiii Posted November 27, 2012 Author Report Share Posted November 27, 2012 I just have another order (I'm waiting personnal informations) so it will be 185 PCBs. What I meaned in my previous post is 189 PCBs at 8.50€ is the price of 200 PCBS at 8€. Regards, Jerome. Quote Link to comment Share on other sites More sharing options...
boops Posted November 30, 2012 Report Share Posted November 30, 2012 hello ,just paid,sorry for the delay... Quote Link to comment Share on other sites More sharing options...
Fairlightiii Posted December 1, 2012 Author Report Share Posted December 1, 2012 100% of the Paypal invoices have been paied (181 PCBs). I will order today or tommorow because my manufacturer doesn't begin his work before monday (and I'm working on a better accuracy of LEDs positionning on the board, I will say much later). Best regards. Quote Link to comment Share on other sites More sharing options...
orbitalgun Posted December 1, 2012 Report Share Posted December 1, 2012 Any possibility of getting on this order for 2 boards? Quote Link to comment Share on other sites More sharing options...
Fairlightiii Posted December 1, 2012 Author Report Share Posted December 1, 2012 Any possibility of getting on this order for 2 boards? Hi Orbitalgun. Send me quickly by mail (jeromebo at free dot fr) the quantity you would like and your personal informations: Midibox username Paypal mail address Real name Postal address Country Level of shipping insurance you want to take. Best regards. Jerome. Quote Link to comment Share on other sites More sharing options...
Fairlightiii Posted December 1, 2012 Author Report Share Posted December 1, 2012 (edited) Hi. I have ordered the PCBs. My manufacturer think I could receive them near the december 17th, maybe more early. For your information the revision is now 2.5 with a better accuracy positioning of LEDs. The wiki is updated with the new coordinates files. Best regards, Jerome. Edited December 1, 2012 by Fairlightiii Quote Link to comment Share on other sites More sharing options...
Fairlightiii Posted December 2, 2012 Author Report Share Posted December 2, 2012 Mouser order done (264-10K-RC already stocked). Best regards, Jerome. Quote Link to comment Share on other sites More sharing options...
MaG2k Posted December 9, 2012 Report Share Posted December 9, 2012 Hello Fairlightiii, are there some news about the ordering status? Regards MaG2k Quote Link to comment Share on other sites More sharing options...
Fairlightiii Posted December 9, 2012 Author Report Share Posted December 9, 2012 (edited) Hello Fairlightiii, are there some news about the ordering status? Regards MaG2k Hi MaG2k. Fedex has tryed to bring me the Mouser order but I was not at home. I will receive the parcel probably tomorrow. My manufacturer informed me that the PCBs should arrived near the 17th of december. Best regards, Jerome. Edited December 9, 2012 by Fairlightiii Quote Link to comment Share on other sites More sharing options...
Fairlightiii Posted December 11, 2012 Author Report Share Posted December 11, 2012 The Mouser order arrived today. ...I foresee long hours counting the 1194 SIL RN :turned:. Best regards. Jerome. Quote Link to comment Share on other sites More sharing options...
technobreath Posted December 13, 2012 Report Share Posted December 13, 2012 The best of luck to you with that hehe. Thank you! :D Quote Link to comment Share on other sites More sharing options...
Fairlightiii Posted December 15, 2012 Author Report Share Posted December 15, 2012 Hi everybody. The PCBs have left the manufacturer and should arrive the 20th of december. Best regards, Jerome. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.