Altitude Posted July 11, 2013 Report Posted July 11, 2013 (edited) This is based on Ilmenator's 16x4 BLM PCB that he was kind enough to let me liberate from him and a matte Ponoko laser cut case. I used the same LEDs I used for my SEQ and they match perfectly brightness wise. I interfaced it to the CS via a mini din8 connector which needed to be buffered to work properly (thanks to TK). I'll post the files for the case and the brd and schem of the buffer I used (I obviously just did it by hand here). Thanks to Ulrich and Throsten for another great project! These are the files for the case, please note that there is NO HOLE for the connection, the location and size of that will depend on how you want to implement this so its up to you. Standoffs were 8mm for the top, 18mm for the bottom. I ended up grinding the 18mm ones for a tighter fit so 16mm plus washers may be a better choice to make up for tolerances http://misw.us/p2_blm_case.svg Here are the sch and brd for the buffer. I designed it to simply attach to the board via female DIL on the back like I have it on my PCB. I have NOT actually made these yet so you probably want to check it for any errors but it is simply based on the connections shown the LPC17 schematic and is how I wired my hand made board. Also worth mentioning is the DIN8 socket and DIN cable I used despite having the same colored wires, did not have those wires connected to the same pins so make sure you check with a meter.. Edited July 14, 2013 by Altitude 1 Quote
jbdiver Posted July 12, 2013 Report Posted July 12, 2013 Nice job. I'll definitely watch for your files. This is probably the next addition to my seq4. Quote
ilmenator Posted July 12, 2013 Report Posted July 12, 2013 Fantastic job - and thanks for your kind words! Best, ilmenator Quote
niklasni1 Posted July 15, 2013 Report Posted July 15, 2013 Cool project. I want this too. BTW, Where did you get those green on black displays? Quote
Altitude Posted July 15, 2013 Author Report Posted July 15, 2013 those are the Kyocera ones (formerly Optrex) Quote
janvanvolt Posted September 28, 2013 Report Posted September 28, 2013 those are the Kyocera ones (formerly Optrex) Got any order number or supplier ? I assume you didn't made a PCB ... breadboarded ? Quote
Altitude Posted September 30, 2013 Author Report Posted September 30, 2013 Mouser: http://www.mouser.com/ProductDetail/Optrex/C-51850NFQJ-LG-ACN/?qs=sGAEpiMZZMt7dcPGmvnkBvYnOvX7dbDNGFPEbefb4Dw%3d Yeah, I just bread boarded it. Didnt feel like waiting 2 weeks and it took maybe half an hour Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.