TK. Posted December 7, 2007 Report Posted December 7, 2007 MIDIbox CV V1.2 is now available for downloadNew Features:Support for AOUT_NG moduleSupport for BankStick (128 Patches can be stored)Interpolation function which allows to smooth 7bit controllers (CC/velocity/...) over 12bit resolution with selectable slew rateLegato/Mono/Poly now selectable seperately for each channelmain page now displays patch number, patch name and 8 animated (short-triggered) activity metersthere is now a DIN sync start/stop output available at pin C.1 (CORE::J7:SC)the DIN sync clock output is now located at pin C.0 by default (CORE::J7:RC, consistent with MBSEQ)ChangeLog: http://www.ucapps.de/midibox_cv_changelog.htmlUpdated User Manual: http://www.ucapps.de/midibox_cv.htmlDownload: http://www.ucapps.de/mios_download.htmlHave fun! :)Best Regards, Thorsten.
bugfight Posted December 7, 2007 Report Posted December 7, 2007 woohoo! thanks again tk. now i can play with the aout_ng...
stryd_one Posted December 13, 2007 Report Posted December 13, 2007 [*]Interpolation function which allows to smooth 7bit controllers (CC/velocity/...) over 12bit resolution with selectable slew rate"Hi, My name's TK and I'm F**Kin badass. "
mono-poly Posted January 13, 2008 Report Posted January 13, 2008 Are there envelopes/lfo's and sample n holds gonna be added?
bugfight Posted January 13, 2008 Report Posted January 13, 2008 Are there envelopes/lfo's and sample n holds gonna be added?hehe the cross fertilization of mb, sdiy, e-m etc continues...check out analog toolbox: http://www.ucapps.de/mios/analog_toolbox_v1_1c.zip
mono-poly Posted January 13, 2008 Report Posted January 13, 2008 :DI'd love to see lfo's witch sync on the midi clock and some sample n holds.Various envelope responses would be cool to.But perhaps i just ask to much.
TK. Posted January 13, 2008 Author Report Posted January 13, 2008 I'd love to see lfo's witch sync on the midi clock and some sample n holds.Various envelope responses would be cool to.But perhaps i just ask to much.Just use a PIC18F4685 and install the MIDIbox SID V2 firmware - beside of LFOs with MIDI-Sync, Sample&Hold, Envelopes it provides much more features you probably haven't thought of yet. :)-> http://www.ucapps.de/midibox_sid_manual_cv.htmlBest Regards, Thorsten.
illogik Posted April 4, 2008 Report Posted April 4, 2008 :) :D ;Doohmy ; i've been thinking about using lfo/envelope/modmatrix from mbsid as startingpoint for a cv interface, but this is more easy then i imagined, just use a downstripped mbsid (only make controls for lfo&envelopes +possibly modmatrix) i'm gonna fink about implementing this. great!thats it.. i'm back
markk Posted April 12, 2008 Report Posted April 12, 2008 Hello,I upgraded firmware on my midiboxCV to 1.2a and I also added sync clock and start/stop output for Roland TR606. But unfortunately it doesn't work properly. I inspect output signals with oscilloscope and it seems that all work properly. Have somebody tested those outputs with TR606?Best regards, Marko
Recommended Posts