Twin-X

My favorite shred

I am also amazed noone posted this before? The vimeo is better quality

Your best start would be ucapps.de and read the sid stuff. Then read the wiki and then the forums.

Some email domains do not accept noreply adresses. So it does not even gets into your spam box. On gmail (i use this) it works i get notifications. So either change your email or check the forum on regular base

I finished the boards 2 months after release. When i got a panel from Wilba i finished the box for like 98%. So it's fully working no problems if you follow the wiki and the thread with the bug work arrounds. This project is not hard.

Swindus, Are you the guy that invented MALA???? If so thank you!!!!! Regards, Twin-X

I find this a flaw of novation that you cannot acces the boot loader to retry the flashing. In my opnion novation should fix this for you and you just pay shipping cost to compromise.

People, I know your not gonna like this but in the future wait with posting something until TK has done this. Thorsten has made a rule for postings in this forum. It clearly states his approvel is needed. It does not state our approvel is needed. Even is MIOS is non commercially bla bla. TK can decide diffrent for some matters. People allready have made judgements without a reply from Thorsten. Look he approves or disapproves. We are not the persons to do this. It would make things much easier if you just let TK reply first before we do. Thanks, Jeffry

I think something went wrong. You could try again. As a test i will upload an avatar here

hehehe ;) thanks simone. I will explain later what was going on.

Well i mean a unattended distro with all packages built in then. You still have to use your own serial and the windows sources etc.

Where is the vote for a windows distro?

Where did you buy the box? I have tried to create one from hardwood. But the plastic one looks good.

OMG you guys are wasted. Time to setup midibox rehab clinic. ;D

I don't even know the new ip myself so ;D

Euhm make some money for the company :D

I will post a picture tomorrow ;)

fantastic colors. I like this build alot!!

LOL i know that. With too ling i ment the jack is attached to the bottom of the joystick shaft so the shaft gets longer and not the magnet has more travel

It could make the shaft too long and then the magnet will get too far from the sensor on the edges

More people use their midiboxes commercially that TK knows of : so the awnser is yes

second link added. Sorry i forgot it. Keep em commin guys some good ideas here.

Some of you know i am building an arcade cabinet. Now i am struggiling with a concept i desperatly need to get working :D (it's not that my live depends on it though) I would appreciate this more than a donation so let your brains work :D and i know you guys have some great idea's. Oh and someone that is thinking along works in a machine shop so making thins should not be an issue but we preffer it not hehehe. It must be DIY'able. Ok so we have the Ultimarc 360 Joysticks. http://www.ultimarc.com/ultrastik_info.html And we have transparent balltop's. We need to cram 5mm rgb leds (3mm are unfindable) in the stick. This is not the challenge. The challenge is to get the wires connected not to twist while the stick rotates. Bottom of the joystick shaft is a magnet attached that hovers above a pcb with a move sensor. Because there is no fixation the shaft can rotate freely over it's axis. Now as you can see in the second link someone has made a solution with a dc plug (very clever) but this provides us only 2 wires. Now how can we solve this so that the wires wont get twisted whilst playing? I allready found a 4 connector 2,5mm plug but i know there must be other ways. I can make pictures if preffered of the joystick. *Second link i forgot.... http://forum.arcadecontrols.com/index.php?topic=82292.0

can't you buy spare parts for your weller? I know i can for mine. I have an old one a wecp-20

I agree