-
Posts
1,291 -
Joined
-
Last visited
-
Days Won
101
Content Type
Profiles
Forums
Blogs
Gallery
Image Comments posted by Antichambre
-
-
Sympa! Ca a de la gueule!
It's a beauty
But still afraid this extension will be too much expensive for me :/ -
@Phatline You're right, It's a toy! Cause I'm like a child when I play with it :)
It's very instinctive to create grooving melodies and other bass lines with it. I will do a demo in video ASAP...
-
With a simple bender It's a very cheap one(not a press), not easy to use(not very precise) but enough for me.
https://www.ebay.co.uk/p/2255535496You can fix it on a strong table
Or you need a very heavy vice ;) this one is a legacy of my grandfather, in fact the entire workbench is a heritage -
yep! I can.
-
7 hours ago, slo said:
That is a thing of beauty.
Thanks!
This is the first and old version but except the small corrections they are the same circuit.
The new version is pre-assembled on matte black PCB ;) -
Magnifique!
-
Is this a midibox?
What is the point when most of the parameters are already accessible on the synth? This makes sense on a Juno alpha for exemple but a 106 !?
>understood! It's for the virtual one
The picture is too small but anyway if you did this your-self... Well done! :)
BR
Bruno- 1
-
the panels will be made of classic aluminum or steel like for the seqv4+ ?
-
-
9 hours ago, weasel said:
are these MAX11300 powered by any chance?
No, it's not.
If you really want to try it... here a mios32 module for the pixi (max11300). this is a draft !
Please share your work if you do some modification or correction.
Thanks -
44 minutes ago, Hawkeye said:
Nice job! That is a heck of a modiphyed v4+! :)
Thank you Peter :)
-
4 hours ago, Midilator said:
The LEDs are indeed super bright (~250 - 1000 mcd for the various colours). However, in the setup how I would like to design it, I would use only 4 multiplexed channels instead of your 32, so they would be approx. 8x as bright. Did I deduce that correctly? (I assume the duty cycle of each LED is 1/32 at the most because of multiplexing - or do I misinterpret they way your setup works?). That would mean that I can use LEDs that are 8x less bright than yours to achieve the same physical brightness (while the max duty cycle would be 1/4 in my case).
Yes, the number of mux lines is settable in the TLC, it will adapt its addressing cycle and memory use depending on that value. There's a resistor connected to TLC which has to be cosen depending on your led, and a lot of registers for color balance, luma, ghosting etc...
4 hours ago, Midilator said:The PMMA mask is very cool! Did you create these yourselves? If so, with which method? (3d printing, molding, etc.). Again - only if you would divulge this information!
In total - I would be very proud of myself if - at some point in the future - I would be able to achieve something remotely as cool as what you did :)Homemade with my cheap and chinese CNC router, bit is 0.8mm 1 tooth alu and I use water+soap to help milling(this is the trick).
I use black pmma for mask and translucent white for led is a trotec product -
- It's PEC16-4015F-S0024 . some more information in the dokuwiki...
-
Yes it's better in real, always difficult to take picture of RGB stuff with an iPhone ;) Brightness is enough for my taste even with the plastic mask and window, the window is made with special pmma,
led were ordered form china, i can share contact, here the datasheet
- Yes I did it manually, it's an ant work.
- No update for the moment.
-
No schematic shared for the moment too! ;)
Best regards
bruno
-
@latigid on One day we will have to work on a small and cheap fpga solution to reduce the matricing components and avoid ghosting in the same time ;)
especially since I've already worked on it for the OLRE16, this work must not be lost...
-
Sorry @Hawkeye I uploaded 3 times the same 2 pictures. :/ But Album upload has always this strange behaviour of saying I don't want for finally doing it.
-
Always! As far as I remember. That's exactly the shade of blue in which I painted my first moped hihi :)
There's some red pigment in this blue, name is "bleu nuit" in french ;) -
Yes Fantastic work!!!
-
Just now, Schrabikus said:
so I'm still searching for another one to take keyboard from it for more authentic look
you've got a lot on ebay
https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=ELEKTRONIKA+MK+44&_sacat=0Thx for the explanation :) fun project!
Best -
Great work!
Funny; someone here talked about the CEM3396, then nothing...
And without a word you come with the CEM3379, board already done! That's cool.
Did you plan to connect it to a Core?
Did you think about a front panel?
Doku? -
I always like your wood style too!
- 1
-
Wat is the use of the Microphone? :)
-
I'm strangely left handed for the fork and knife only, it seems like I'll be here too
-
Great! I 'm sure Adrian knows it very well but painting usually changes a lot of things in the tolerance adjustments.
-
This is very professional, this is just more and more beautiful... congrats!
latigid on's new MatriX :)
in Members Gallery
8Posted
https://codereview.stackexchange.com/questions/136406/tetris-in-c-in-200-lines
;)