iZZE

Congratulations.. glad you got it working :) Also nice small adapter PCB.. made it yourself ? I see you have an almost empty Base PCB running for testing ? You have one spare too ? :)

Its always good to help others out - even if it is with something simple :) I also got so much support from the forum back in the days so i am glad to be useful myself once in a while haha. Greetings, Patrick

There ya go 127_arps__050.syx

Yes i think it has to do with setting the correct device id to activate the already implemented lcd driver. And the documentation about the jumpers is also not a 100% clear, but actually its very easy i was shocked when the OLED displayed something..

What is the Status of this project ? I am very interested as well

I have one set left - how much do you need and where are you located at ? Cheers

I don't know - the wiring is just as in the above documents - i seriously don't know why other people couldn't get it to work :) Just follow these steps and it should work. No Magic applied

Newhaven OLED NHD-0420DZW-AY5 on MB6582 1.) Connect your Newhaven OLED according to the following Pinout This is represented on the PCB like this: You will have to solder the 4 small SMD Jumper bridges on the bottom of the PCB Reassure that you have all the pins right and then proceed to step 2. 2.) Start MIOS Studio and connect your MB6582 to your Midi Interface Make sure that you have a stable connection - now load the device_id_00_lcd7.hex (supplied by TK from another thread). Start the upload to the MB6582. After this upload has been finished select the MB6582 Firmware application again (setup_mb6582.hex) - the attached file is version 2.045pre1 Wait till the upload is finished. 3.) Enjoy your new OLED awesomeness! device_id_00_lcd7.hex setup_mb6582.hex

Hey guys anyone got a PCB Set for MB6582 that he is considering to sell ? Or a broken MB6582 that you cant get running ? Please offer everything, cheers

Hey guys.. After hunting for days and days and already giving up.. i got the Newhaven OLED Display to work on my MB-6582 :D I will shortly write a step by step guide when i have time tomorrow.. Just saying don't give up the hope.

Ah damn.. i should have checked the forum before buying a Newhaven Oled.. sad part is that i even paid a lot of import duties and shipping for it :( Nobody got it working yet ? :(

I am interested, can't figure out how to pm on my phone... hit me up

Hey guys.. I dont have anymore time for music. So i am selling all my gear. This also includes my new MB-6582 which i just finished months ago. Some of you may know the Day of the Tentacle MB-6582 :P I also ordered the Red/black waldorf knobs to make it perfect. Its maxxed out, has a good power supply.. nice look.. cooled SIDs (Wilba SIDs brand new). Pretty depressing, but well.. i have to sell it.. its hard times.. which doesnt mean it will be cheap.. i am asking exactly what all the parts and all the stuff did cost. What you think ?

What does your tattoo stand for ? :D

I just entered my Order on the Wiki Page.. hope i am not too late.. :)