Johey Posted June 13, 2013 Report Posted June 13, 2013 That looks awesome! Do you build the case as well as cutting the panels or how can I get my hands on a complete one? 1 Quote
julianf Posted June 13, 2013 Author Report Posted June 13, 2013 The case frame, base, and ends are from one of the group-buys that ran here. It was supplied by www.heidenreich.de As i say, the one above was from a group buy, but im sure they can be purchased individually also. The top and rear plates were cut here. They are cut from Wilba's files, but with some alterations, most notably, adjustments so as the panels fit the case tighter / firmer. The panels in the photo are also 1.5mm, which means that they fit into the case rails themselves, rather than needing (expensive) profiling. The entire set (front and rear) then works out cheaper than just the original top panel, and also creates a stronger build. Quote
Highcooley Posted January 2, 2014 Report Posted January 2, 2014 (edited) Does anybody know what happened to Julian? He suddenly didn't respond to PMs anymore. His last sign in was over a month ago. In my case it was right after he told me that my panel was finished and ready for shipment. We where about to decide for the shipping method when he didn't respond to my answer. Does anybody have any information? All good, we're back in contact after the abrupt Christmas hols. Edited January 7, 2014 by Highcooley Quote
NorthernLightX Posted January 2, 2014 Report Posted January 2, 2014 Julian has been ill and one of his CNC machines broke down. He has a job for me in the pipeline as well. Do you have his email? I'd send him a mail asking a status update, I'm sure your stuff is fine. Quote
julianf Posted May 2, 2014 Author Report Posted May 2, 2014 Does anybody know what happened to Julian? He suddenly didn't respond to PMs anymore. His last sign in was over a month ago. In my case it was right after he told me that my panel was finished and ready for shipment. We where about to decide for the shipping method when he didn't respond to my answer. Does anybody have any information? All good, we're back in contact after the abrupt Christmas hols. The above transaction was concluded ages ago, but, just to be clear to the casual reader - the delay was *prior* to me taking any payment. For me, that's quite an important detail, which could be missed! : ) Of course, any delay is tedious, but delays after payment is made are, in my mind, another issue entirely. I should also give thanks to Highcooley for his purchase, even in spite of the quiet period! : ) Quote
Grizzlebee Posted June 9, 2018 Report Posted June 9, 2018 I know it's a long shot but are any of these panels still available? Griz Quote
tehsparx Posted July 25, 2018 Report Posted July 25, 2018 (edited) On 6/9/2018 at 8:13 AM, Grizzlebee said: I know it's a long shot but are any of these panels still available? Griz JulianF last posted in this Forum in February 2018 regarding making cheaper cases to go with his panels - so it sure does look like he is still making them for people :) You should direct message Julian, he doesn't receive email notifications for people replying on his threads (only direct message), and doesn't check the forums daily. Edit: or just order one from his site lol http://thebeast.co.uk/?product=midibox-mbseq-v4-desktop-enclosure-panel-set There's still 1 panel for the enclosure in stock right now. Edited July 25, 2018 by tehsparx Quote
warpboy Posted May 28, 2019 Report Posted May 28, 2019 Hello , Does someone have some news from Julianf ? I ve bought the last panels kit for a seq V4 on is website one month ago, but I have absolutely no news from my order I ve already sent two messages via the contact form without any answer. I can't imagine it's volontary from him, but now I have paid 143€ with paypal and I am a bit disapointed .... Any info would be appreciated Thank you W Quote
jaytee Posted May 28, 2019 Report Posted May 28, 2019 I know he had a baby not too long ago and had fallen a bit behind on orders. You might try contacting him on Muffwigglers? Quote
warpboy Posted May 29, 2019 Report Posted May 29, 2019 hello Jaytee, ok, I understand ;) I ll try to contact him on Muffwigglers thank you for your reply :) Quote
dwestbury Posted January 13, 2020 Report Posted January 13, 2020 (edited) I know this is a super old post, but I just wanted to drop a thanks to @julianf for making my awesome front and rear panels. His prices are much better than going direct through FrontPanelExpress (close to half actually). Shipping was reasonably quick from the UK to US, taking ~1 week. I've ordered from him multiple times... Edited October 23, 2020 by dwestbury Quote
Cyrax Posted October 23, 2020 Report Posted October 23, 2020 Hello, i want a Panelset for my MB6582 Set, i am located in Germany, @dwestbury do you have a source for it? Quote
dwestbury Posted October 23, 2020 Report Posted October 23, 2020 (edited) On 10/23/2020 at 8:02 AM, Cyrax said: i want a Panelset for my MB6582 Set, i am located in Germany, @dwestbury do you have a source for it? I would suggest trying Julian's shop first: http://thebeast.co.uk/?product_cat=midibox He’s based in the UK and he typically has panel sets ready to ship internationally. And as I said above, his prices are the best I've seen (e.g., £80 vs £170) If you want to source local to Germany (Berlin), you can try Shaeffer: https://www.schaeffer-ag.de/en/front-panel-designer/?lang=en Whichever way you go, good luck with your build and post some pics when you're done. Edited October 24, 2020 by dwestbury 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.