ilmenator Posted May 3, 2013 Report Posted May 3, 2013 Hi, I ordered the first batch of TPD boards and have some (7) leftovers. 10€ plus shipping each. I'll be traveling to Germany end of next week from where shipping is extra cheap compared to Norway where I am normally located. BEWARE: smd soldering is required to finish this board. Also, I have two sets (2 pieces each) of LED matrix modules that I can include for 6€ per set. First come first serve, PM me if interested. Best, ilmenator Quote
Hawkeye Posted May 4, 2013 Report Posted May 4, 2013 (edited) Yes!! Thanks for your hard work and sending mine from Germany to save postage :-) This is probably the best add-on bling you can get for the buck for a SEQ V4, hope a few more people are interested! :-) Many greets, Peter Edited May 4, 2013 by Hawkeye Quote
SiliconHeaven Posted May 4, 2013 Report Posted May 4, 2013 I would like one TPD board and one set of the LED Matrix module . €16 + how much to ship to 95117? These will match the BLM16x4 I got of yours. :-)Damn....that looks sexy! Quote
ilmenator Posted May 4, 2013 Author Report Posted May 4, 2013 Ok, so for now all the LED matrix modules are gone. I still have some boards left. That was fast... @SiliconHeaven: Yes, this module can sit nicely next to the BLM16x4 as documented in the Wiki. WRT shipping costs: you have PM Quote
freddy Posted May 4, 2013 Report Posted May 4, 2013 (edited) Please, count me in for one TPD PCB as well, ilmenator, my 16x4 is missing company :-) Edited May 4, 2013 by freddy Quote
ilmenator Posted May 4, 2013 Author Report Posted May 4, 2013 Please, count me in for one TPD PCB as well, ilmenator, my 16x4 is missing company :-) Yes, you have PM. Quote
jojjelito Posted May 4, 2013 Report Posted May 4, 2013 Good that I snagged me some! Just hope the bank transfer is reasonably fast. Quote
Hawkeye Posted May 5, 2013 Report Posted May 5, 2013 (edited) For reference (and the shopping cart later on) - which LED matrix modules do you recommend, ilmenator? Thanks & many greets, Peter Edited May 5, 2013 by Hawkeye Quote
ilmenator Posted May 5, 2013 Author Report Posted May 5, 2013 Peter, that's all in the Wiki - as long as the modules share the same size and footprint (and I believe that the pinout shown in the Wiki's datasheet is somewhat "standard") it will work. I have used modules with common anode pins, but adapting the software for common cathode modules should not be a problem. I am not sure the modules I used are brand modules. On the backside it says M12088A/BEG and WLG PC5. Those from Watterott share the same data sheet, they might be identical? Btw, I have 3 boards left. Best, ilmenator Quote
freddy Posted May 5, 2013 Report Posted May 5, 2013 For reference (and the shopping cart later on) - which LED matrix modules do you recommend, ilmenator? Thanks & many greets, Peter Peter, I'm about to try these, they look like common cathode if I read the internal diagram correctly, though. Next week I'll fetch them and solder them when the board arrives. A supplier in my home country has them for 6,73 € (incl VAT) but I won't be at home before the following Thursday (ilmenator will be posting the boards later, anyway). I'll keep you updated, if interested. Quote
Hawkeye Posted May 5, 2013 Report Posted May 5, 2013 Thx guys! Looking forward to it! :-) Bye, Peter Quote
ilmenator Posted May 8, 2013 Author Report Posted May 8, 2013 Just a little bump to advertise for cheap shipping inside/from Germany. If you contact me by tomorrow Thursday 18:00 Berlin time i can take stuff with me when I travel there on Friday. Quote
freddy Posted May 21, 2013 Report Posted May 21, 2013 Just a little bump to advertise for cheap shipping inside/from Germany. If you contact me by tomorrow Thursday 18:00 Berlin time i can take stuff with me when I travel there on Friday. Mine is fully populated (save the buttons) but unfortunately I didn't get to testing yet :-( Anyway, good job, ilmenator! Quote
ilmenator Posted May 21, 2013 Author Report Posted May 21, 2013 It has arrived :-) thanks! Good to hear - thanks for your feedback! Mine is fully populated (save the buttons) but unfortunately I didn't get to testing yet :-( Anyway, good job, ilmenator! There is some coding necessary to make both matrices work, PM me for modified files. Quote
ilmenator Posted May 23, 2013 Author Report Posted May 23, 2013 Sure :-). There are three boards left, and I have ordered a few more duo LED matrix modules to go with them if you want. Quote
rosch Posted May 24, 2013 Report Posted May 24, 2013 yeah 1 set please! would that work with the big blm too? future music but good to know Quote
ilmenator Posted May 25, 2013 Author Report Posted May 25, 2013 Yes obviously! Please PM me with your address and tell me how fast you need this - I might be able to send this from Germany end of June. MUCH cheaper shipping... Quote
Schrabikus Posted October 26, 2013 Report Posted October 26, 2013 (edited) Finished mine. Stuck with config with all those SR numbering, but dealed with it after good pot :rofl: Thanks to Illmenator for this project and Jojjelito for segment leds and caps! Edited October 26, 2013 by Schrabikus Quote
jojjelito Posted October 27, 2013 Report Posted October 27, 2013 Nice work! Just happy to help out with shipping and getting the PITA parts :) Quote
Hawkeye Posted October 27, 2013 Report Posted October 27, 2013 Looking sweet, congrats Mr. Schrab! :) Quote
taximan Posted November 1, 2013 Report Posted November 1, 2013 Will you you having another run of boards? cheers Paul Quote
ilmenator Posted November 1, 2013 Author Report Posted November 1, 2013 Well that depends on demand. I will monitor this thread and see how things develop. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.