Jump to content

BLM 16x16+X PCB and case order [CLOSED/waitlist]


Recommended Posts

  • Replies 174
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Popular Posts

I'm happy with the PCB, so I will hopefully ship by the end of the week. Now's the time to tell me if your address has changed in the past while. I would just like to check one more component before r

Thanks Thorsten for the firmware updates to get it working and the brilliant platform to begin with! Looking forward to those other modes, whatever they turn out to be. Och, I should say that I ca

Please see post above: if you don't fit into a multiple like 10, 15, 20 PCBs etc, then you can go onto a waiting list for the next batch. Let's see how many are requested. Looks like a big trip to the

Posted Images

It's probably best to bulk order in the EU/US. Here are the prices for a set of 18:

 

Mouser single person:    $88.02
Mouser 6 people (108):   $78.12
ADAfruit single person:  $80.28
ADAfruit 6 people (108): $71.28

(the unlucky few who missed out on a shift button need a whole extra 4x4 piece)

 

 

In my experience, I don't normally pay customs fees or VAT from Mouser if I choose UPS as shipping and order over a certain amount. With ADAfruit these would be added on. I'm a leeeetle bit uncomfortable with bringing piles of button pads and LEDs over the border, even though I realise it would be the most efficient way to ship everything together...

 

Would someone in DE/AT run a bulk order of LEDs/button pads from Mouser and ship them out? It might save $50 per person.

Edited by latigid on
Link to post
Share on other sites

All current invoices are now sent.

 

I have contacted those who initially signed up, but had changed circumstances, with an option to deposit $100 with me to hold the pricing as it is at the moment. Full payment could be delayed for at least half a year. No problem if this doesn't work at the moment, but the downside will be increased costs in the long run as the current order relies on certain quantity discounts.

Link to post
Share on other sites

Oh, that reminds me.  So u have the laser cut part finalized? I've got prime for Ponoko for another couple weeks so I could do a US run

Okay, I've attached it, eventually I'll write up a wiki page. It's based on the "P2" size, 384 mm square. I chose milky acrylic, but I don't see a problem with opaque (?).

This EPS file uploads correctly to Formulor, but please verify that everything looks okay before ordering. Because the spacer doesn't span the entire PCB I've added a few extra "washers" to help with the spacing, hopefully they work out okay.

You have extra room on two edges if you need anything else done. 

BLM_spacer_3mm_acrylic.eps

Link to post
Share on other sites

Still waiting on bank payment from TK., ganchan and flyweight. When you make the transfer, it's best to use USD as requested. If you must specify euros, the amount might not be quite correct and I'll ask for a top-up :). You can use this calculator to get an idea of the exchange rates:

 

 

Link to post
Share on other sites

Number of spare BLM/miniCore PCBs: 3

If you want cheap shipping and a cheap case, please let me know by, say 15.09.2015. Obviously I'll have the PCBs until they're sold, but I will only order the number of cases I have payments for. I'll have to consider the interest for another run (not looking likely at this stage), but let's see.

Link to post
Share on other sites
  • TK. pinned this topic
  • TK. unpinned and unpinned this topic

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...