ganchan

search there: if your GPUTILS SDCC and PERL path are right.

i've make a mistake sorry, if you have smash pcb, you must connect 1:1 but CORE MD to SID SC. if you have 2 SID (v2) you must connect SID2 SO to CORE J14 and not cascade to SID1 SO.

I've fried a variable psu. there was short in one cable during test. It's fired just 1 of the 2 resistors inside, the biggest one. It was connected after the rectifier at the positive pins of 2 big caps 1000µf 25v. The other resistor it's a 560ohm. It's completely fired than it's impossible to know the value.

uhm... that pin it's just connect to nothing in the PCB wires, so you must connect pin 1:1 from CORE J10 and SID J2. You will have only 1 crossed cable at SC that it's in different position on CORE J10.

glad to reopen this thread but i've problem with mios studio and my ESI Rom I/O 2. mios studio don't recognize the midi ports of it. :'( p.s. this device it's drivers free under windows solved using Rom I/O 1st release that come with own drivers. pp.ss. Rom I/O 2 use the OS Usb/Audio drivers, mac & win, who can explain me why MIOS Studio do not recognize it?

i think i will buy one, i was planning to make mine but as i know doug you make things very pro. so this panel will be good for sure! tnx.

i want, black on white (or black on gray) for 1 of my x0x.

i've 5 maxotr breaked... maXtor.. pfua'.. the do the better TAC! ever, it seems that they build it just for make noise and music! sasha you're too funny! love your mind.

Prof i've a last supplier that had offer me 5000 AP for 0.39$ each or 20.000 for 0.029$. http://www.volkin.com/SearchResult.aspx?PartNo=2sa733ap contact: Thurayah Husen i don't know if you are able trought your society to do better, i hope, but at the end of all.. i think we don't need this fkn AP. ah.. thankyou for saving us :)

i prefer your red ones!! ;D

hey unit-sound (this was an old tribe's name, unit-sound[system], they was great!), can you tell me how much had you pay for shipping and in witch country please? just for info.

argh..

i can't stop lougthing. it's poetic. we need more people with this humor and genius!

i will buy and send them. please heeeeelp me! ;D pics are: PIC17C43-16/P PIC17C43-33I/P

thanks for the support TK, but i haven't find a starter pic for cheap. so i would UP this thread if some one can burn it for me when i will buy. pics are: PIC17C43-16/P PIC17C43-33I/P the firmware it's only one, so i think it must burn same on both pic?! JoMoX is totally LACK of info.. i'm going to hate them.

i use bending Pin too. the other things bad is that you quite always broke the one near the cut.

look at the right one. more space, simple solder. i know, it's like an incest.. ;D

:-[ nothing wrong with standards. those are standards both wirings. i knov mai 'englanese' itz not so gud bat dhis thing itz not so difficult to anderstand. ;)

an hair dryer!! i'm bald obviously! i'll try to explain: ;D my SID have the optimize psu circuit inside ok? c64 psu use 4 pins ok? the connector have 6 pins ok? i want to take a 14v psu, cut the connector, and replace with the c64 one, and connect to the free pins the negative and positive ok? so i can plug or the c64 psu, that use him own pins, or the 14v psu, that use the 2 free pins. on the sid/core side, the female connector had c64psu 4pins +-5v / +-9v -> connected to the optimized psu, -> and than to j2 core j2 sid +5, j1 sid +9; 2pins+-14v connected to j1 sid converted to +9v 7809, to j1 core that convert with 7805 +5v, from here to j2 sid.

2SC945P @ €0.10 2SC945P.JPG

in the c64 power plugs there are 2 free pins. i'm thinking to use this to connect a 14v modified psu with the same c64 male plug. so i can use the original or the 14v one. but i know that 7805 must not stuffed into the core and 2 pins must shorted. a) can i leave the 7805 soldered when i connect the c64 PSU? b) the optimized psu circuit will receive the Voltage form the SID and CORE when the 14v mod it's plugged. this will be bad for noise/dropping etc.? i'm doing some test but more prof. member can suggest me ho do it (without a switch better) i've NO space. regards. G.

nothing special, just my first try with a graphic's vectors program. MOS.zip MOS.zip

i need wite on black for my MB6582 and for some other synths so i'm in. what are you ordering from albs?

For all italians here, go to live in another country if you want DIY! Digikey had answare me this after uhm, some week: Shipping are free over €50 (€150 in real). Digikey ship items by UPS directly to your address. Than you have to pay just 20% of the value and 20% of the real shipping costs. a) Shipping directly it's not thrue. For it.digikey they use a Netherlands office that receive the pack and than ship it to italy. I've contacted a person that had payed €120 to UPS (TNT in IT) plus €46 of customs/IVA20% for €180 of original value. b) If i can't know how much are the "real" shipping costs i can't know how much it's the 20% of that. well, i'm very glad for this, and sorry with people that had join this order. :) keep in mind this experience. TheProf will save us! FKN regards. G.

received a batch of 733P with silver face. who knows witch brand are this? Sanyo? NEC? Pippotronic? 3 on 10 are 340-350.