Sasha

You are welcome. Looks really cool! ;)

I watched the video. Nice! Scratching sounds pretty good. Side by side waveform seams very helpful. Thanks for an answer. ;)

Thanks to Nikola Tesla (Serb as myself :)) this guy made this super cool "synth". Imagine gig with this and SEQ3 8) Check it out.

May I ask something slightly off topic... why do you prefer Torque over other DJ programs that are much longer in use? What is special about it?

Yes, it is nice to have support from you guys. Thank you all. Regarding your offer Simone... It would be pretty expensive to send a piece of wood to a World tour. I think I`ll see if friend can bring me Mahagony from Jaicen. I`m not in a hurry because I need that mahagony to make sides for sequencer which needs to be Endorphins pair. I have a piece of mahagony to make new side for Endorphin if everything goes OK this time. I need to go to the laserman again and try to make new slots in it which can be tricky as last time both sides are made at same time which is crucial for alignment. If it fails I will need new to make both 2 sides again. I feel sooo drained with this finalization... :( I really need to buy one machine and I`ll fu** off all that so called carpenters experts which dont make difference between mm and cm. I overpaid their expertise so many times before. >:(

Hey Jaicen, 40/50 old wood side panels sounds very nice to me. :) My friend should go to London soon and stay there for some time so maybe he could send it to his address. If you can send it to him it would be very nice of you. Is there something I can do for you?

Hello, dstamand. There is no limited encoders. Your encoders are fine. Encoder usually have 24 pulses, and MB64E is the one that convert those pulses to MIDI steps (0-127). You need to configure your encoders on MB64E to send relative values not absolute, but your software needs to support it at first place.

Thank you both for an offers. I really do appreciate. I know SLP need to buy wood first in order to send it to me, and I know he lives in Germany. What about you Jaicen? ...no Location in profile. I wonder what version of SID would be actual in the time that tree fully grown. ;D Why dont you people using those exotic woods for your gear if you can find it so easily. Don`t you like it? I see latest post is on the 1st page now, like real blog. Thanks administrator. ;)

It`s really nice to see people from community are meeting in real. It would be cool if one day, all midiboxers gather on a big midibox exhibition/gig. I would really like to met people from community and see all those cool boxes on one place. :) Regardles of exhibition, If any of you are coming to Serbia (Belgrade) I would be glad to accommodate. ;)

Martin is newbie here, so he probably thought that Doc is some website and that`s why he asked. Although, it is hard not to notice Doc.

That`s just great! My Juno 60 say thank you, Sneakthief. ;)

As I disassembled my, almost finished, V2 because of V3, I am also very interested in some ergonomics improvement. ;)

Wow, that InTime is truly revolutionary software! :) I thought following tempo/metronome from MIDI gear helping drummer have tight beat until I recently talked to one drummer while watching local band that use live drums, guitars and MIDI gear. Sorry to pollute German forum.

I wouldn`t expect answer over the weekend :D So you liked the feeling of those buttons, are they quiet? The knitter buttons makes NO sound at all!

SLP, thank you for offer. I`ll remember that and contact you once I finish with Endorphin. Meanwhile you can ask the guys if they got some and what is the price. Thank you one more time. ;)

It was first idea that came to my mind after i calmed down but visually whole synth looks very different if the sides arn`t going few millimeters over the edge. I am really hard in making compromises in design. :-\ I was already forced to made some compromises while building Endorphin because I didn`t planed this project 100%... I was enough of drawing board (Corel) and I couldn`t wait to start building it so some errors occurred. I was so devastated few days because of what happened, but now I face it and give up original idea. I will Made new side for Endorphin from the piece of Mahagoy that I left for SEQ. I already disassembled almost finished sequencer because I wanted to have full V3 version with all extras. Yes, I`m probably crazy, but what can I do. Most important thing for me is that I am 100% satisfied with finished piece... which is not easy but once I made it I feel extremely proud and happy for a long time. ;)

Man, I understand now why you waited for vacation to work on it.

How can you glue piece that is missing? Cutting disk eat few mm of material, and If you add another piece of wood it simply want fit to the rest of the wood texture. I really dont want to have vertical line where I joint those two pieces of wood. It would be worst than leaving as it is. Only option I have now is to made new side panel from the piece that left and abort idea of making Endorphin a pair with Sequoia. I cannot make it anymore if I want to have uniform look. Anyway, thanks for suggestion.

Rubber is OK and probably cheaper. Try to get some samples, and you will love it. :) I get some samples over local distributor, but they don`t distribute in small quantity. Inform us about the price.

Vattern, Bob asked for some easy going buttons so he can play drums. With MEC buttons there is no chance to play drums as they are extremely stiff ! I can suggest knitter-switch buttons (www.knitter-switch.com) I don`t know about the price but these buttons are perfect for playing drums. They have some fairly big ones with small movement and they are very soft, just perfect for what you want. ;) Check out TR3 Button (you can chose the colour of the cap, with or without LED, and even position of LED) http://www.knitter-switch.com/pdf_en/3_4_1%20TR_TM.pdf

I think Sibalco have some purple "bullet" knobs.

exactly I did those slots in wood to avoid using screws because of aesthetic reasons so extending it using glue would be worst than screws. :-\

Yesterday I almost kill a carpenter! I mark the engraved piece of mahagony where it needs to be cut, and mask the pieces I need with tape, so no mistake can be made (like cutting over the engraved line) but stupid retard cut it 3 full mm away of the line, put the pieces in my hand and just gone. ??? >:( What a mother fucker!!! Whole Endorphin and Sequoia prjects are ruined now, as I managed to find just enough mahagony to make 4 side panels. I sacrificed some options on Endorphin to be able to put all 4 synths in just 70mm high case (70mm is the width of mahagony). Making the sloth in the wood 4mm from edge with laser was also critical. I really don`t know what to do now. I will try to make another sloth in mahagony I have left, but will not left for sides for Sequoia which meant to be pair of Endorphin. That really sucks! :(

Thank you for the long post. I will probably mark the console with numbers only.

I hope so. But this finalization takes longer than I planed.